For 2018 Spatial CIMIS will begin processing the next generation GOES-16/17 data. This will require new infrastructure (new dish and servers) and a slightly modified spatial CIMIS toolset to process the new spatial data.
Follow these instructions to setup the spatial CIMIS program on the GOES processing server.
Spatial CIMIS is run primarily with the GRASS GIS program. Additional steps are required to acquire the raw GOES data and SHOULD BE RUN AS THE CIMIS USER.
Download the Spatial CIMIS GRASS initial database and processing scripts.
sudo su - cimis
git clone -b GOES-16-17 https://github.com/CSTARS/spatial-cimis
ln –sf spatial-cimis/gdb
grass -text ~/gdb/cimis/PERMANENT
The cimis user will need the ET APP key. ~cimis/.grass7/rc should contain:
MAPSET: 500m
ET_APPKEY: {your app key}
GISDBASE: /home/cimis/gdb
LOCATION_NAME: cimis
GUI: text
Verify ET_APPKEY by running GRASS and checking with the v.in.et -? command. Install GRASS modules
for this work
GRASS 7.4.0 (cimis):~ > v.in.et -?
GRASS 7.4.0 (cimis):~ > g.gisenv
With incron installed ensure the cimis user can add to its incrontab file:
echo cimis >> /etc/incron.allow
The following incron job copies cloud cover data into the Grass DB (GOES16 or GOES17).
Edit the goes.mk file and update the following line to ensure it points to the correct home directory.
sudo su – cimis
vi ~/spatial-cimis/g.cimis/etc/goes.mk
Make sure this line looks like this:
files:=$(wildcard /home/cimis/CA/*.pgm)
Add the following incronab entry which will import into GRASS the recently acquired raw data from the receiver.
incrontab –e
/home/cimis/CA IN_MOVED_TO \
grass /home/cimis/gdb/goes16/cimis \
--exec /home/cimis/spatial-cimis/g.cimis/etc/goes.mk \
--directory=/home/cimis/spatial-cimis/g.cimis/etc files=$@/$# import solar
Download, compile r.solpos and r.heliosat using g.extension.
This process adds it to the local addons in ~/.grass7/addons.
sudu su – cimis ; cd src
git clone https://github.com/CSTARS/r.solpos
cd gdb
grass cimis/cimis
cd ~src/r.solpos
g.extension r.solpos url=/home/cimis/src/r.solpos
r.solpos --help
g.extension r.heliosat url=/home/cimis/spatial-cimis/r.heliosat
r.heliosat
g.extension extension=v.in.et url=/home/cimis/spatial-cimis/v.in.et
v.in.et -?
The clear sky solar calculation uses the cloud cover data from the GOES16/17 Grass DB to calculate the actual solar net radiation. Data is collected every 15 minutes with a daily solar calculation at the end of the day. Each day's solar calculation takes about 25 minutes.
This is an example of how to calculate the solar radiation for a day's worth of data.
grass solar/cimis
Always start in the cimis mapset to retain bash history. In this example we are looking at the day of August 1 2018. It is assumed that the raw data has already been pushed to this processor and imported into GRASS.
cd solar
g.mapset 20180801
make --directory=~/spatial-cimis/g.cimis/etc/ -f solar.mk solar;
The make command will process the day's raw data and produce the necessary net radiation maps. Once the calculation
has finished you can run the g.list rast command to verify you see the following rasters with the -G extension were
created.
g.list.rast type=rast pattern=ssetr*
ssetr
ssetr-G
ssetr-Gc
ssetr-Gi
ssetr-K
You can search multiple days to determine if any past days need the solar calculation. For example if the month of October raw data has been imported use this command to check each day has incomplete solar calculations.
for m in 201808??;do x=`g.list type=rast pattern=ssetr-G mapset=$m`;echo $m $x;done
20181001 ssetr-G
20181002
20181003
20181004 ssetr-G
20181005 ssetr-G
20181007
20181008
20181010 ssetr-G
20181011 ssetr-G
20181012 ssetr-G
20181013 ssetr-G
20181014 ssetr-G
20181015 ssetr-G
20181016 ssetr-G
20181017 ssetr-G
20181018 ssetr-G
20181019 ssetr-G
20181020 ssetr-G
20181021 ssetr-G
20181022 ssetr-G
20181023 ssetr-G
20181024 ssetr-G
20181025 ssetr-G
20181026 ssetr-G
20181027 ssetr-G
20181028 ssetr-G
20181029 ssetr-G
20181030 ssetr-G
20181031 ssetr-G
This list shows that days 10/2, 10/3, 10/7 and 10/8 did not have solar calculations. In this case this is a known GOES16 satellite outage due to solar activity so there is no data available for those days.
But if you check a month and see no solar calculations (no ssetr-g rasters exist) you can process an entire
months of raw data using the following loop.
for m in 201810??;do echo $m;
g.mapset $m;
make --directory=~/spatial-cimis/g.cimis/etc/ -f solar.mk solar;
done
Note that using the -n switch will act as a dry run and show you what needs to be done without actually
executing the calculation for that day.
make –directory=~/spatial-cimis/g.cimis/etc/ -f solar.mk solar -n
Once the solar calculation for the day is complete run the final ETo calculation.
sudo su - cimis
grass cimis/cimis
cd cimis
g.mapset 20180813 -c
make --directory=~/spatial-cimis/g.cimis/etc --file=cimis.mk ETo
Incron setup for grb-box.cstars.ucdavis.edu or DWR receiver.
Download RPM package
for OpenSuse Leap 42.3 and install.
rpm -i /root/incron-0.5.10-2.1.x86_64.rpm
Register startup script: insserv incron.
More details at http://inotify.aiken.cz/?section=incron&page=download&lang=en
Create the cimis user and CA subset directory
useradd –m –c “Spatial CIMIS” cimis
mkdir /grb/raw/CA ; chown cimis /grb/raw/CA
cd ; ln -sf /grb/raw/CA
Subset data should reside on the largest storage array
Clone repo
su - cimis ; git clone -b GOES-16-17 https://github.com/CSTARS/spatial-cimis
Pre-setup incron
echo cimis >> /etc/incron.allow
$grb-box=$(find /home/cimis/spatial-cimis/grb-box |grep –v README)
sudo cp -v $grb-box /usr/local/grb-box
sudo chmod 644 *.mk
sudo chmod 754 goestcl
chgrp cimis goesctl *.mk
On the grb-box create a passwordless ssh key pair for the rsync exchange and add public key to cimis@GOESBOX/.ssh/authorized_keys. Pre-pend string from="IP of GRB Box receiver" to limit access only from the GRB-BOX.
ssh-keygen -t rsa -b 4096 -C "[email protected]"
incrontab –e
/grb/raw/fulldisk IN_CREATE /usr/local/grb-box/goesctl raw=$@/$# CA
/home/cimis/CA IN_CREATE /usr/local/grb-box/goesctl ca=$@/$# push
Initially connect with the rsync ssh connection with the key pairs to accept the connection. The incrontab session should now be pushing CA cropped band 2 images to the cimis server.
Keep the last 6 months of CA subsetted data on the grb-box
4 4 * * * find /home/cimis/CA/ -mtime +180 -name \*.pgm | xargs rm As of October 23rd 2018 the production DWR and UCD Spatial CIMIS processors no longer processes GOES15 data from their respective on site dishes and receivers. Instead they pull daily GOES16 CIMIS data products from the UCD GOES16 processor and use existing processes to continue to provide raster outputs, Arc/Info ASCII Grid output as well as ETo data for the webAPI.
Each GOES15 processor run scripts as the cimis user to accomplish this.
3:15am /home/cimis/bin/cg.tunnel
Pulls daily GOES16 grass maps to /home/cimis/gdb/cimis
3:30am /home/cimis/bin/cg.grass.script /home/cimis/bin/cg.daily.output
The cg.daily.output grass script runs a modified version of the raster output grass makefile png-special which creates the daily raster images and zipcodes.
Scripts available in this repo.
