Skip to content
forked from bluespec/Toooba

RISC-V Core; superscalar, out-of-order, multi-core capable; based on RISCY-OOO from MIT

License

Notifications You must be signed in to change notification settings

CTSRD-CHERI/Toooba

 
 

Repository files navigation

CHERI-Enabled Out-of-Order RISC-V Core

This is a prototype of an out-of-order core that implements hardware capabilities (see CHERI for details). It is based off of Bluespec's Toooba, which is a slight variation of MIT's RisyOO core.

Note re. distribution of MIT RISCY-OOO sources.

The directory src_Core/RISCY_OOO contains sources copied from MIT's riscy-OOO repository. See LICENSE_RISCY-OOO for MIT's license.

Bluespec's modifications to files in src_Core/RISCY_OOO are relatively small and mostly additive:

  • To add the RISC-V 'C' extension (compressed instructions)
  • To add support for Bluespec's Tandem Verification
  • To add support for Bluespec's Debug Module.
  • To fix about bugs leading to about half a dozen failures of standard RISC-V ISA tests

The University of Cambridge made changes to RiscyOO to add support for CHERI capabilities. For details on what CHERI instructions do, please see the Instruction Set Architecture document.

About the source codes (in BSV and Verilog)

The BSV source code in this repository, from which the synthesizable Verilog RTL in this repository is generated, is highly parameterized to allow generating many possible configurations, some of which are adequate to boot a Linux kernel.

The pre-generated synthesizable Verilog RTL source files in this repository are for one specific configuration:

  1. RV64ACDFIMSUxCHERI (a.k.a. RV64GCxCHERI)
    • RV64I: base RV64 integer instructions
    • 'A' extension: atomic memory ops
    • 'C' extension: compressed instructions
    • 'D' extension: double-precision floating point instructions
    • 'F' extension: single-precision floating point instructions
    • 'M' extension: integer multiply/divide instructions
    • 'xCHERI' extension: capability-based security extensions
    • Privilege levels M (machine), S (Supervisor) and U (user)
    • Supports external, timer, software and non-maskable interrupts
    • Passes all riscv-isa tests for RV64ACDFIMSU
    • Boots the Linux kernel

If you want to generate other Verilog variants, you'll need a Bluespec bsc compiler, which is open source and can be found in this repository.

Testbench included

This repository contains a simple testbench (a small SoC) with which one can run RISC-V binaries in simulation by loading standard mem hex files. The testbench contains an AXI4 interconnect fabric that connects the CPU to models of a boot ROM, a memory, a timer and a UART for console I/O.

[Note: iverilog functionality is currently limited because we are still working out robust mechanisms to import C code, which is used in parts of the testbench.]

This repository contains four sample build directories, to build an RV64ACDFIMSUxCHERI simulator, using Bluesim and Verilog simulation. There are also RVFI-DII variants of these to be used with TestRIG. The generated Verilog is synthesizable.

Simulation

We currently only support Bluesim and Verilator simulation. There is also some code related to simulation on iVerilog, but this is currently not working and not being maintained.

Source codes

This repository contains two levels of source code: Verilog and BSV.

Verilog RTL can be found in directories with names suffixed in '_verilator' in the 'builds' directory:

    builds/..._verilator/Verilog_RTL/

The Verilog RTL is synthesizable (and hence acceptable to Verilator). It can be simulated in any Verilog simulator.

The RTL represents RISC-V CPU RTL, plus a rudimentary surrounding SoC enabling immediate simulation here, and which is rich enough to enable booting a Linux kernel. Users are free to use the CPU RTL in their own Verilog system designs. The top-level module for the CPU RTL is Verilog_RTL/mkProc.v. The top-level module for the surrounding SoC was originally Verilog_RTL/mkTop_HW_Side.v, but is now Verilog_RTL/mkTop_HW_Side_edited.v. The SoC has an AXI4 fabric, a timer, a software-interrupt device, and a UART. Additional library RTL can be found in the directory src_bsc_lib_RTL.

Bluespec BSV source code (which was used to generate the Verilog RTL) can be found in:

  • src_Core/, for the CPU core, with sub-directories:

    • Core/: the top-level of the CPU Core (specifically, CoreW.bsv)
    • CPU/: more CPU core sources
    • RISCY_OOO/: the bulk of the code, taken from MIT's riscy-ooo design, with local modifications.
    • ISA/: generic types/constants/functions for the RISC-V ISA (not CPU-implementation-specific)
    • PLIC/: Platform-Level Interrupt Controller (standard RISC-V spec)
    • BSV_Additional_Libs/: generic utilities (not CPU-specific)
    • Debug_Module/: RISC-V Debug Module to debug the CPU from GDB or other debuggers
  • src_Testbench/, for the surrounding testbench, with sub-directories:

    • Top/: The system top-level (Top_HW_Side.bsv), a memory model that loads from a memory hex file, and some imported C functions for polled reads from the console tty (not currently available for Icarus Verilog).

    • SoC/: An interconnect, a boot ROM, a memory controller, a timer and software-interrupt device, and a UART for console tty I/O.

The BSV source code has a rich set of parameters. The provided RTL source has been generated from the BSV source automatically using Bluespec's bsc compiler, with certain particular sets of choices for the various parameters. The generated RTL is not parameterized.

To generate Verilog variants with other parameter choices, the user will need Bluespec's bsc compiler. See the next section for examples of how the build is configured for different ISA features.

In fact the CPU also supports a "Tandem Verifier" that produces an instruction-by-instruction trace that can be checked for correctness against a RISC-V Golden Reference Model. Please contact Bluespec, Inc. for more information.

Build Instructions

First clone this repository and then inside the repository initialize the submodules:

   $ git clone [email protected]:CTSRD-CHERI/Toooba.git
   $ cd Toooba
   $ git submodule update --init --recursive

Dependencies

Build the Bluespec Compiler bsc from this repository. You will also need set the $BLUESPECDIR to the lib folder of your bsc install. By default this is located in inst/lib directory inside your bsc repo. Also, make sure to add the inst/bin directory to your $PATH environment variable.

If you wish to use Verilator, the build has been tested on versions 3.922 and 3.926. You can build any version of Verilator from this repository and follow the build instructions on the official website. Using version 4.002 or later is currently not supported.

    $ verilator --version
    Verilator 3.922 2018-03-17 rev verilator_3_920-32-gdf3d1a4

Building a simulator using Bluespec's Bluesim

To build a Bluesim-based simulator, use the following commands to generate the elaboration files and compile them:

    $ cd builds/RV64ACDFIMSUxCHERI_Toooba_bluesim
    $ make compile
    $ make simulator

Building a simulator using Verilator

To build a Verilator-based simulator, use the following commands to generate the Verilog RTL and compile it using Verilator:

    $ cd builds/RV64ACDFIMSUxCHERI_Toooba_verilator
    $ make compile
    $ make simulator

Running a simulator

You must have followed one of the steps above to build a simulator (with either Bluesim or Verilator). In the corresponding build directory:

  • $ make test will run the executable on the standard RISC-V ISA test rv32ui-p-add or rv64ui-p-add, which is one of the tests in the Tests/isa/ directory. Examining the test: target in Makefile, we see that it first runs the program Tests/elf_to_hex/elf_to_hex on the rv32ui-p-add or rv64ui-p-add ELF file to create a Mem.hex file, and then runs the simulation executable which loads this Mem.hex file into its memory.

  • $ make TEST=<isa_test_name> test will run the executable on the standard RISC-V ISA test whose name is supplied. The full set of standard isa tests are in the Tests/isa/ directory.

  • $ make isa_tests will run the executable on all the standard RISC-V ISA tests relevant for RV64ACDFIMSU (regression testing). This uses the Python script Tests/Run_regression.py. Please see the documentation at the top of that program for details.

About

RISC-V Core; superscalar, out-of-order, multi-core capable; based on RISCY-OOO from MIT

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Bluespec 89.8%
  • Verilog 6.0%
  • Makefile 1.5%
  • C 1.4%
  • Python 0.8%
  • C++ 0.4%
  • Other 0.1%