Merge pull request #1939 from pierre-haessig/patch-1 #7530

Workflow file for this run

.github/workflows/build-windows.yml at 5af3a67

	name: build-windows

	on: [push, pull_request]

	jobs:
	fast_build_release:
	runs-on: windows-2019

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake
	# Use a bash shell so we can use the same syntax for environment variable
	# access regardless of the host operating system
	shell: bash
	working-directory: ${{runner.workspace}}/build
	# Note the current convention is to use the -S and -B options here to specify source
	# and build directories, but this is only available with CMake 3.13 and higher.
	# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
	run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=ON -DCMAKE_BUILD_TYPE=Release

	- name: Build
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --build . --config Release --parallel

	- name: Test
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --timeout 300 --output-on-failure -C Release

	- name: Configure CMake All
	shell: bash
	working-directory: ${{runner.workspace}}/build
	run: cmake $GITHUB_WORKSPACE -DALL_TESTS=ON

	fast_build_release_all_tests:
	runs-on: windows-2019

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake All
	shell: bash
	working-directory: ${{runner.workspace}}/build
	run: cmake $GITHUB_WORKSPACE -DALL_TESTS=ON

	- name: Build All
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: \|
	cmake --build . --parallel --config Release

	- name: Test All
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --parallel --timeout 300 --output-on-failure -C Release

	- name: Install
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --install .

	windows_release_fb_off:
	runs-on: windows-2019

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake
	# Use a bash shell so we can use the same syntax for environment variable
	# access regardless of the host operating system
	shell: bash
	working-directory: ${{runner.workspace}}/build
	# Note the current convention is to use the -S and -B options here to specify source
	# and build directories, but this is only available with CMake 3.13 and higher.
	# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
	run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=OFF -DHIGHS_NO_DEFAULT_THREADS=ON

	- name: Build
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --build . --config Release --parallel

	- name: Test
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --timeout 10000 --output-on-failure -C Release

	fast_build_debug:
	runs-on: windows-latest

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake
	# Use a bash shell so we can use the same syntax for environment variable
	# access regardless of the host operating system
	shell: bash
	working-directory: ${{runner.workspace}}/build
	# Note the current convention is to use the -S and -B options here to specify source
	# and build directories, but this is only available with CMake 3.13 and higher.
	# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
	run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DFAST_BUILD=ON -DHIGHS_NO_DEFAULT_THREADS=ON

	- name: Build
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --build . --config Debug --parallel

	- name: Test
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --output-on-failure -C Debug

	fast_build_debug_all_tests:
	runs-on: windows-latest

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake
	# Use a bash shell so we can use the same syntax for environment variable
	# access regardless of the host operating system
	shell: bash
	working-directory: ${{runner.workspace}}/build
	# Note the current convention is to use the -S and -B options here to specify source
	# and build directories, but this is only available with CMake 3.13 and higher.
	# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
	run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DALL_TESTS=ON -DHIGHS_NO_DEFAULT_THREADS=ON

	- name: Build
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --build . --config Debug --parallel

	- name: Test
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --output-on-failure -C Debug

	windows_debug_fb_off:
	runs-on: windows-latest

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake All
	shell: bash
	working-directory: ${{runner.workspace}}/build
	run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DFAST_BUILD=OFF

	- name: Build All
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: \|
	cmake --build . --parallel --config Debug

	- name: Test All
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --parallel --timeout 300 --output-on-failure -C Debug

	windows_release64:
	runs-on: windows-2019

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake
	# Use a bash shell so we can use the same syntax for environment variable
	# access regardless of the host operating system
	shell: bash
	working-directory: ${{runner.workspace}}/build
	# Note the current convention is to use the -S and -B options here to specify source
	# and build directories, but this is only available with CMake 3.13 and higher.
	# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
	run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=OFF -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON

	- name: Build
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --build . --config Release --parallel

	- name: Test
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --timeout 300 --output-on-failure -C Release

	windows_release64_all_tests:
	runs-on: windows-2019

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake
	# Use a bash shell so we can use the same syntax for environment variable
	# access regardless of the host operating system
	shell: bash
	working-directory: ${{runner.workspace}}/build
	# Note the current convention is to use the -S and -B options here to specify source
	# and build directories, but this is only available with CMake 3.13 and higher.
	# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
	run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=OFF -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON

	- name: Build
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --build . --config Release --parallel

	- name: Test
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --timeout 300 --output-on-failure -C Release


	windows_release64_fb_off:
	runs-on: windows-2019

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake
	# Use a bash shell so we can use the same syntax for environment variable
	# access regardless of the host operating system
	shell: bash
	working-directory: ${{runner.workspace}}/build
	# Note the current convention is to use the -S and -B options here to specify source
	# and build directories, but this is only available with CMake 3.13 and higher.
	# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
	run: cmake $GITHUB_WORKSPACE -DFAST_BUILD=OFF -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON

	- name: Build
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --build . --config Release --parallel

	- name: Test
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --timeout 300 --output-on-failure -C Release

	windows_debug64:
	runs-on: windows-latest

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake
	# Use a bash shell so we can use the same syntax for environment variable
	# access regardless of the host operating system
	shell: bash
	working-directory: ${{runner.workspace}}/build
	# Note the current convention is to use the -S and -B options here to specify source
	# and build directories, but this is only available with CMake 3.13 and higher.
	# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
	run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON

	- name: Build
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --build . --config Debug --parallel

	- name: Test
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --output-on-failure -C Debug

	windows_debug64_all_tests:
	runs-on: windows-latest

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake
	# Use a bash shell so we can use the same syntax for environment variable
	# access regardless of the host operating system
	shell: bash
	working-directory: ${{runner.workspace}}/build
	# Note the current convention is to use the -S and -B options here to specify source
	# and build directories, but this is only available with CMake 3.13 and higher.
	# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
	run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DALL_TESTS=ON -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON

	- name: Build
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --build . --config Debug --parallel

	- name: Test
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --output-on-failure -C Debug

	windows_debug64_fb_off:
	runs-on: windows-latest

	steps:
	- uses: actions/checkout@v4

	- name: Create Build Environment
	# Some projects don't allow in-source building, so create a separate build directory
	# We'll use this as our working directory for all subsequent commands
	run: cmake -E make_directory ${{runner.workspace}}/build

	- name: Configure CMake
	# Use a bash shell so we can use the same syntax for environment variable
	# access regardless of the host operating system
	shell: bash
	working-directory: ${{runner.workspace}}/build
	# Note the current convention is to use the -S and -B options here to specify source
	# and build directories, but this is only available with CMake 3.13 and higher.
	# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
	run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=Debug -DFAST_BUILD=OFF -DHIGHSINT64=on -DHIGHS_NO_DEFAULT_THREADS=ON

	- name: Build
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute the build. You can specify a specific target with "--target <NAME>"
	run: cmake --build . --config Debug --parallel

	- name: Test
	working-directory: ${{runner.workspace}}/build
	shell: bash
	# Execute tests defined by the CMake configuration.
	# See https://cmake.org/cmake/help/latest/manual/ctest.1.html for more detail
	run: ctest --output-on-failure -C Debug

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Merge pull request #1939 from pierre-haessig/patch-1 #7530

Workflow file

Merge pull request #1939 from pierre-haessig/patch-1 #7530

Jobs

Run details

Workflow file for this run