Merge pull request #11 from miklschmidt/patch-2

Correct some typos and reference new threaded 2020

docs/versions/2.0.0.md

@@ -2,19 +2,19 @@
 
 > Compatibility: EVA >= 2.4.0
 
-An MGN12 rail is ~60% of the weight of a MGN15 rail. EVA is dropping support for MGN15 in version 2.4.0 for that and other reasons like easier maintenance. 
+An MGN12 rail is ~60% of the weight of an MGN15 rail. EVA is dropping support for MGN15 in version 2.4.0 for that and other reasons like easier maintenance. 
 
-Now to leave V-Core Pro users locked from EVA updates this *final* version of Easy Mod is prepared.
+To avoid leaving V-Core Pro users locked out from future EVA updates this *final* version of Easy Mod has been prepared.
 
 ## Two variants
 
-To make the transition to MGN12 easier and hopefuly cheaper two variats of the `xy_joiner` parts are made.
+To make the transition to MGN12 easier and hopefuly cheaper, two variants of the `xy_joiner` parts are provided. Both variants now has an M5 screw that threads into the ends of the extrusions for an easier and more robust installation.
 
 ### Variant A
 
 ![](../assets/em_X%20gantry_a.png)
 
-This one is made in hope that a 400mm rail will be available more easily then a 420mm one, does require a new 2020 extrusion though. 
+This one is made in the hope that a 400mm rail will be more easily available than a 420mm one, it does however require a new 2020 extrusion. 
 
 | Hardware         | Length     | Comment              |
 | ---------------- | ---------- | -------------------- |
@@ -27,7 +27,7 @@ This one is made in hope that a 400mm rail will be available more easily then a
 
 ### Variant B
 
-This one reuses the same 394mm 2020 extrusion but requires a 420mm rail that might be harder to get.
+This variant reuses the same 394mm 2020 extrusion but requires a 420mm rail that might be harder to source.
 
 ![](../assets/em_X%20gantry_b.png)
 
@@ -40,17 +40,17 @@ This one reuses the same 394mm 2020 extrusion but requires a 420mm rail that mig
 
 {{ bom_to_md_table("2.0.0_B.csv", 0) }}
 
-## XY idlers
+## XY Corner Idlers
 
-Those did not change from the previous version.
+These have not changed from the previous version, and are still compatible.
 
 ## Features
 
-Optional `M5x20mm` screws was added to where the 2020 extrusion ends meet the `xy_joiners`
+Optional `M5x20mm` screws were added to where the 2020 extrusion ends meet the `xy_joiners`
 
 ![](../assets/x_gantry_slice_features.png)
 
-The whole design is based of the V-Core 3 design (V-Core 3 ideas started with Easy Mod so it's a full circle now :smile:). With that we have the single M5 bolt on the top of the part, much like on V-Core 3 but due do the differences between the two printers and the B variant 100% compatibility was not achieved.
+The whole design is based of the V-Core 3 design (V-Core 3 ideas started with Easy Mod so it has come full circle now :smile:). With that we have the single M5 bolt on the top of the part, much like on V-Core 3 but due do the differences between the two printers and the B variant, 100% compatibility was not achieved.
 
 ![](../assets/x_gantry_slice.png)