Simulation based grasp filter. This repository contains a grasp filter developed using Isaac Sim, it provides the usage and visualization tools for the MultiGripperGrasp dataset.
MultiGripperGrasp: A Dataset for Robotic Grasping from Parallel Jaw Grippers to Dexterous Hands
Luis Felipe Casas, Ninad Khargonkar, Balakrishnan Prabhakaran, Yu Xiang
[paper] [video] [arXiv] [project site] [dataset folder]
Please cite MulitGripperGrasp Toolkit if it helps your research:
@misc{casas2024multigrippergraspdatasetroboticgrasping,
title={MultiGripperGrasp: A Dataset for Robotic Grasping from Parallel Jaw Grippers to Dexterous Hands},
author={Luis Felipe Casas and Ninad Khargonkar and Balakrishnan Prabhakaran and Yu Xiang},
year={2024},
eprint={2403.09841},
archivePrefix={arXiv},
primaryClass={cs.RO},
url={https://arxiv.org/abs/2403.09841},
}
MultiGripperGrasp Toolkit is released under the GNU General Public License v3.0.
This code was tested with Isaac Sim 2023.1.0 on Linux.
-
Clone the repo:
git clone [email protected]:IRVLUTD/isaac_sim_grasping.git
-
Install the Isaac Sim 2023.1.0 and cd to its python directory: Follow the instructions in the Isaac Sim Website for proper installation. Normally the python.sh is on the following directory:
cd ~/.local/share/ov/pkg/isaac_sim-2023.1.0
-
Install the required libraries using the Isaac Sim python environment:
./python.sh -m pip install tqdm
Note: Only tqdm must be installed, all other libraries should come with the Isaac Sim version.
-
Download the MultiGripperGrasp dataset and the object .usd models from the dataset folder. Links can also be found at the end of this document.
To visualize the dataset a visualization standalone is included in the repository. The script must be ran with the Isaac Sim python.sh. The script requires the following parameters:
- json_dir: Grasp data directory (dataset .json folder). Note: the program does not read .json files within folders, therefore, a valid directory would be the Allegro folder within the dataset.
- gripper_dir: Gripper directory (folder containing all the gripper .usd folders)
- objects_dir: Object directory (folder containing all the object .usd folders)
- num_w: Number of Workstations to run simultaneously (gripper, object pair) (default: 15)
- (Optional) ub: Upper bound to filter the grasps with (applied to fall time).
- (Optional) lb: Lower bound to filter the grasps with (applied to fall time).
- (Optional) transfer: Used for visualizing transfered grasps.
- (Optional) device: Specifies which gpu device to run Isaac Sim with.
Note: To run the simulation without warnings add the following parameters to the command:
--/log/level=error --/log/fileLogLevel=error --/log/outputStreamLevel=errorExample command to run the visualization script:
./python.sh (repo directory)/visualize_grasps.py --json_dir=(dataset .json folder) --gripper_dir=(repo directory)/grippers --objects_dir=(object .usd folder) --num_w=10 --ub=3 --lb=0 --/log/level=error --/log/fileLogLevel=error --/log/outputStreamLevel=error
Please refer to the scripts under the viz_optas folder for an alternative way to visualize the grasps without the IsaacSim dependency!
The simulation can use any gripper and object provided they are prepared correctly (See the documentation to add grippers and objects). It loads the grasp information from the files specified and creates multiple "workstations" to test all the grasps. Then, it tries to perform the grasps with the specified control routines. When the object falls or the testing time is up, the time they took to fall is recorded and then saved to the output file. If any grasps is unable to touch the object, it will be recorded as a negative "fall time" value. Once the grasp test is completed, the workstation will reset and load a new grasp for testing. When all the grasps are finished, the output file is saved, the complete simulation will reset and a new file loaded.
- standalone.py: Graspit grasps standalone executable
- transfer_st.py: Transfered grasps standalone executable
- visualize_grasps.py: Standalone executable to visualize filtered grasps
- views.py: Simulation's behavioral code
- managers.py: Contains grasp information and the reporting of results for all the standalones
- controllers.py: Developed gripper controllers
- utils.py: General utility functions
- grippers: Gripper .usd files
A standalone executable for the graspit grasps (standalone.py) and for transferred grasps (transfer_st.py) are included within the repository. A sample command to run the graspit grasps is shown below along with the available options. Note: for Isaac Sim standalone executables, the commands must be run from the isaac sim python.sh directory.
The standalone.py takes as input:
- json_dir: Grasp data to filter directory (dataset .json folder). Note: the program does not read .json files within folders, therefore, a valid directory would be the Allegro folder within the dataset.
- gripper_dir: Gripper directory (folder containing all the gripper .usd folder)
- objects_dir: Object directory (folder containing all the object .usd folder)
- output_dir: Output directory (directory to save the filtered grasps .json file)
- num_w: Number of Workstations to run simultaneously (object-gripper pair) (default: 150)
- test_time: Total test time for each grasp test (default:3).
- controller: Controller reference (within controllers.py)(default: position)
- (Optional) print_results: Verbosity of standalone after finishing one .json file.
- (Optional) device: GPU device to use for Isaac Sim (default: 0)
- (Optional) headless: Run the simulation headless
Note: To run the simulation without warnings add the following parameters to the command:
--/log/level=error --/log/fileLogLevel=error --/log/outputStreamLevel=errorSample run command:
./python.sh (repo directory)/standalone.py --json_dir=(.json files folder) --gripper_dir=(repo directory)/grippers --objects_dir=(object .usd folder) --output_dir=(output directory) --num_w=100 --test_time=3 --controller=position --headless --print_results --/log/level=error --/log/fileLogLevel=error --/log/outputStreamLevel=error
The grasp filter is able to evaluate the object fall-off time for a large amount of generated grasps. The successful grasps of one gripper can represent successful grasps in others and increase the overall amount of successful grasps in the dataset. To test this hypothesis, we implemented the grasp transfer of successful grasps from one gripper to others and evaluated the transferred grasps using antoher Isaac Sim standalone (transfer_st.py).
We utilize an alignment between grippers to transfer grasps, which used a common notion of gripper pose (translation and orientation). The translation refers to the palm center of the gripper, and the orientation is with respect to a canonical pose of the gripper palm pointing in a fixed direction. Thus, any grasp pose from a gripper was transferred to another by using this pose alignment. We first transform a source gripper pose to its aligned pose, and then transform the aligned pose to the target gripper.
The transfer_st.py takes as input:
- json_dir: Grasp data to filter directory (dataset .json file folder). Note: the program does not read .json files within folders, therefore, a valid directory would be the Allegro folder within the dataset.
- gripper_dir: Gripper directory (folder containing all the gripper .usd folders)
- objects_dir: Object directory (folder containing all the object .usd folders)
- output_dir: Output directory (directory to save the filtered grasps .json file)
- num_w: Number of Workstations to run simultaneously (object-gripper pair) (default: 150)
- test_time: Total test time for each grasp test (default:3).
- controller: Controller reference (within controllers.py) (default: transfer_default)
- (Optional) print_results: Verbosity of standalone after finishing one .json file.
- (Optional) device: GPU device to use for Isaac Sim (default: 0)
- (Optional) headless: Run the simulation headless
Note: To run the simulation without warnings add the following parameters to the command:
--/log/level=error --/log/fileLogLevel=error --/log/outputStreamLevel=errorSample run command:
./python.sh (repo directory)/transfer_st.py --json_dir=(.json files folder) --gripper_dir=(repo directory)/grippers --objects_dir=(object .usd folder) --output_dir=(output directory) --num_w=100 --test_time=3 --headless --print_results --/log/level=error --/log/fileLogLevel=error --/log/outputStreamLevel=error
As of this version, the simulation uses a specific .json structure. The managers.py file is the responsible for reading and transforming the relevant grasp information to the format used by the program. The information is:
- The gripper name: Must be exactly the name with which the gripper is saved within the gripper directory.
- The object name: Must be exactly the name with which the object is saved within the object directory.
- Grasp pose data: 7 dimensional vector containing the gripper and object relative pose. (0-2 denotes the postion, 3-6 denotes the quaternion). Must be changed to the Isaac Sim quaternion convention (w, x, y, z)
- Joint Value Data: vector containing the Degree of Freedom (DoF) information of the grasps.
Additionally within the gripper_isaac_info.json you can find the configuration parameters used for each gripper. In order to reproduce the paper results, one must run the simulation with the same values. A detailed description of each field can be found within the Adding a new Gripper page. All the files provided within this repository and in the [dataset folder] are set up for use out of the box. To reproduce the results you will need to run the simulation on the dataset and save to a different folder (output_dir). This will override the fall_time values and save the latest results on the new file with the relevant information: grasp pose information, grasp dof information, test type, total test time, fall time.
Note: To reproduce the transferred grasp results the same must be done with the transfer parameters in gripper_isaac_info.json.
- Adding a new Gripper
- Adding a new Object
- Available Gripper Controllers
- Graspit Grasp Generation Code
- MultiGripperGrasp Shared Folder here. This folder has the following data along with a README for the dataset:
- Google Scanned Objects and YCB objects .usd files (
Object_Modelsfolder) - Filtered GraspIt Grasps Dataset (.zip file)
- Transferred Grasps Dataset (.zip file)
- Google Scanned Objects and YCB objects .usd files (
- Isaac Sim Manual: https://docs.omniverse.nvidia.com/isaacsim/latest/overview.html
- Helpful code for python standalones (code snippet samples): https://docs.omniverse.nvidia.com/isaacsim/latest/reference_python_snippets.html
- Installing Packages for use with isaac sim python.sh: https://docs.omniverse.nvidia.com/isaacsim/latest/installation/install_python.html
- Deactivate conda if you have an active environment, it may cause some errors when running isaac sim.
- Always use complete paths for the directories, errors may occur otherwise.