Skip to content

Issues: IoTReady/low-power-nrf52-weighing-scale

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

11 Open 0 Closed
11 Open 0 Closed
Author
Filter by author
Loading
Label
Filter by label
Loading
Use alt + click/return to exclude labels
or ⇧ + click/return for logical OR
Projects
Filter by project
Loading
Milestones
Filter by milestone
Loading
Assignee
Filter by who’s assigned
Sort
Sort by
Newest Oldest Most commented Least commented Recently updated Least recently updated Best match
Most reactions
👍 👎 😄 🎉 😕 ❤️ 🚀 👀

Issues list

Documentation Fixes
#11 opened Mar 2, 2021 by hairyhoncho
@ShuBot
Battery level display needs to be further stabilized. Change the current value only if the value falls in the range more than a certain number of times in a row?
#10 opened May 28, 2020 by KaranRajPradhan
In the display control module, processor is left idle as delays are required for the display to work correctly. This idling can be replaces with ms_timer to further optimize power consumption
#9 opened May 28, 2020 by KaranRajPradhan
The Enable pins of the boost converter and LDO can be controlled by the controller to further optimize power consumption
#8 opened May 28, 2020 by KaranRajPradhan
When a weight read command is given, the weight in global variable is sent. This weight can be upto 1 second old. Is there a way to read the weight in real-time when the command comes in?
#7 opened May 28, 2020 by KaranRajPradhan
Add "delta" factor as tolerance for weight display change. This saves battery and appears more stable
#6 opened May 28, 2020 by KaranRajPradhan
Boost converter has relatively higher quiescent current. Power draw can be further optimized by changing this part with one with low quiscent current.
#5 opened May 28, 2020 by KaranRajPradhan
Calibration factor is currently hardcoded. Should be modifyable through Bluetooth
#4 opened May 28, 2020 by KaranRajPradhan
Isolate display control and weighing control components
#3 opened May 28, 2020 by KaranRajPradhan
Charging Indicator LED on the charging IC does not glow properly. This could be happening because the battery is not able to draw enough current charge from the IC. Test with a higher capacity battery
#2 opened May 28, 2020 by KaranRajPradhan
Design does not have a "charging indicator" voltage divider circuit
#1 opened May 28, 2020 by KaranRajPradhan
ProTip! no:milestone will show everything without a milestone.