Quickstart

Pull the latest updates for the feeds: ./scripts/feeds update -a

Make the downloaded package/packages: ./scripts/feeds install -a

For a clean installation the .config file must be restored after feeds update. Restore config file: git restore .config

Build the firmware image: make -j$(nproc)

Flashable images will be located in Speedway/image folder:

• Speedway_Factory_*.bin - factory image for tftp recovery
• Speedway_Sysupgrade_*.bin - sysupgrade image

Image with read-only www folder

To build www folder with read-only permission the build process should be started with www=ro value, for example:

• make -j$(nproc) V=sc www=ro To rebuild the project the Speedway/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/www folder should be removed with root permission

Changing firmware version

The build process uses the firmware version specified in the file Version in the root folder

Additional Notes

Some build issues can be addresses by first running: make dirclean or make clean

You must ensure that additional package(s) are installed on the linux system you are using to build. First updates the list of available packages and upgrade packages:

$ sudo apt-get update && sudo apt-get upgrade

Here is a list of required packages:

gcc                 subversion        
binutils            libz-dev
bzip2               libc-dev 
flex                rsync 
python3             pip 
perl                unzip 
make                libncurses5-dev 
grep                libncursesw5-dev 
unzip               git 
gawk                swig

You can install these by typing:

$ sudo apt-get install gcc binutils bzip2 flex python3 perl make grep unzip gawk subversion libz-dev libc-dev rsync pip unzip libncurses5-dev libncursesw5-dev git swig