LibreELEC · luzpaz · Jan 23, 2025 · Jan 23, 2025 · Jan 23, 2025 · Jan 24, 2025
diff --git a/.gitignore b/.gitignore
@@ -1,4 +1,4 @@
-# build directorys
+# build directories
 /build.*/
 /builds
 /.fakeroot.*

diff --git a/config/path b/config/path
@@ -3,7 +3,7 @@
 
 set -e
 
-# setup initial directorys (relative to root)
+# setup initial directories (relative to root)
   CONFIG=config
   SCRIPTS=scripts
   PACKAGES=packages

diff --git a/config/show_config b/config/show_config
@@ -64,7 +64,7 @@ show_config() {
     config_message+="\n - Include firmware:\t\t\t ${config_firmware}"
   done
 
-  # Image Filsystem
+  # Image Filesystem
 
   config_message+="\n\n Image Filesystems:"
   config_message+="\n ${dashes}${dashes}"

diff --git a/distributions/LibreELEC/options b/distributions/LibreELEC/options
@@ -221,7 +221,7 @@
 # mediacenter also automount internally drives at boottime via udev (yes / no)
   UDEVIL="yes"
 
-# Support for partitioning and formating disks in initramfs (yes / no)
+# Support for partitioning and formatting disks in initramfs (yes / no)
 # This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage
   INITRAMFS_PARTED_SUPPORT="no"
 

diff --git a/packages/addons/browser/chrome/source/bin/chrome-downloader b/packages/addons/browser/chrome/source/bin/chrome-downloader
@@ -52,7 +52,7 @@ rm -f ${CONTROL_FILE} ${DATA_FILE}
 rm -f ${CONTROL_FILE} ${DATA_FILE}
 
 ## extract chrome
-# extrat chrome.deb data to temp
+# extract chrome.deb data to temp
 kodi-send --action="Notification(Extracting Chrome,starting,1000,${ICON})" >/dev/null
 deb_extract_data ${CHROME_FILE} $ADDON_DIR/tmp_download
 

diff --git a/packages/addons/browser/chrome/source/bin/chrome-start b/packages/addons/browser/chrome/source/bin/chrome-start
@@ -16,7 +16,7 @@ if [ -e $ADDON_HOME/env ]; then
   . $ADDON_HOME/env
 fi
 
-# fix file permissons (zip packaging)
+# fix file permissions (zip packaging)
 chmod +x $ADDON_DIR/chrome-bin/chrome
 chmod 4755 $ADDON_DIR/chrome-bin/chrome-sandbox
 

diff --git a/packages/addons/driver/hdhomerun/source/bin/userspace-driver.sh b/packages/addons/driver/hdhomerun/source/bin/userspace-driver.sh
@@ -77,7 +77,7 @@ if [ -z "$(pidof userhdhomerun)" ]; then
 
         [ "$DVBMODE" = "auto" ] && DVBMODE=""
 
-        # remove setttings for this tuner
+        # remove settings for this tuner
         awk -v val="[$SERIAL]" '$0 == val {flag=1; next} /^tuner_type=|^use_full_name=|^disable=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $DVBHDHOMERUN_CONF_TMP >${DVBHDHOMERUN_CONF_TMP}-types
         mv ${DVBHDHOMERUN_CONF_TMP}-types $DVBHDHOMERUN_CONF_TMP
         echo "" >>$DVBHDHOMERUN_CONF_TMP

diff --git a/packages/addons/driver/sundtek-mediatv/source/bin/sundtek-mediatv.start b/packages/addons/driver/sundtek-mediatv/source/bin/sundtek-mediatv.start
@@ -189,7 +189,7 @@ if [ -z "$(pidof mediasrv)" ]; then
 
       [ ! -f $KEYMAP ] && KEYMAP=""
 
-      # remove setttings for this tuner
+      # remove settings for this tuner
       awk -v val="[$SERIAL]" '$0 == val {flag=1; next} /^[^\[]|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-types
       mv ${SUNDTEK_CONF_TMP}-types $SUNDTEK_CONF_TMP
       echo "" >>$SUNDTEK_CONF_TMP

diff --git a/packages/addons/service/minidlna/source/config/minidlna.conf b/packages/addons/service/minidlna/source/config/minidlna.conf
@@ -34,7 +34,7 @@ inotify=yes
 enable_tivo=no
 
 # set this to beacon to use legacy broadcast discovery method
-# defauts to bonjour if avahi is available
+# defaults to bonjour if avahi is available
 tivo_discovery=bonjour
 
 # set this to strictly adhere to DLNA standards.

diff --git a/packages/databases/mariadb-connector-c/package.mk b/packages/databases/mariadb-connector-c/package.mk
@@ -8,7 +8,7 @@ PKG_LICENSE="LGPL"
 PKG_SITE="https://mariadb.org/"
 PKG_URL="https://github.com/mariadb-corporation/mariadb-connector-c/archive/v${PKG_VERSION}.tar.gz"
 PKG_DEPENDS_TARGET="toolchain zlib openssl"
-PKG_LONGDESC="mariadb-connector: library to conntect to mariadb/mysql database server"
+PKG_LONGDESC="mariadb-connector: library to connect to mariadb/mysql database server"
 PKG_BUILD_FLAGS="-gold"
 
 PKG_CMAKE_OPTS_TARGET="-DWITH_EXTERNAL_ZLIB=ON

diff --git a/packages/emulation/libretro-pcsx-rearmed/package.mk b/packages/emulation/libretro-pcsx-rearmed/package.mk
@@ -39,7 +39,7 @@ if [ "${ARCH}" = "arm" ]; then
   if [ "${DEVICE}" = "OdroidGoAdvance" ]; then
     sed -e "s|armv8-a|armv8-a+crc|" \
         -i ../Makefile.libretro
-    PKG_MAKE_OPTS_TARGET+=" platfrom=classic_armv8_a35"
+    PKG_MAKE_OPTS_TARGET+=" platform=classic_armv8_a35"
   else
     PKG_MAKE_OPTS_TARGET+=" platform=unix"
   fi

diff --git a/packages/graphics/vulkan/glslang/package.mk b/packages/graphics/vulkan/glslang/package.mk
@@ -27,7 +27,7 @@ PKG_CMAKE_OPTS_COMMON="-DBUILD_EXTERNAL=ON \
                        -Wno-dev"
 
 post_unpack() {
-  # Enables SPIR-V optimzer capability needed for ENABLE_OPT CMake build option
+  # Enables SPIR-V optimizer capability needed for ENABLE_OPT CMake build option
   mkdir -p ${PKG_BUILD}/External/spirv-tools
     tar --strip-components=1 \
       -xf "${SOURCES}/spirv-tools/spirv-tools-$(get_pkg_version spirv-tools).tar.gz" \

diff --git a/packages/graphics/vulkan/vulkan-tools/package.mk b/packages/graphics/vulkan/vulkan-tools/package.mk
@@ -59,6 +59,6 @@ pre_make_target() {
 }
 
 post_makeinstall_target() {
-  # Clean up - two graphic test tools are superflous
+  # Clean up - two graphic test tools are superfluous
   safe_remove ${INSTALL}/usr/bin/vkcubepp
 }
diff --git a/packages/multimedia/nvidia-vaapi-driver/package.mk b/packages/multimedia/nvidia-vaapi-driver/package.mk
@@ -8,4 +8,4 @@ PKG_LICENSE="MIT"
 PKG_SITE="https://github.com/elFarto/nvidia-vaapi-driver"
 PKG_URL="https://github.com/elFarto/nvidia-vaapi-driver/archive/v${PKG_VERSION}.tar.gz"
 PKG_DEPENDS_TARGET="toolchain libva nv-codec-headers gst-plugins-bad"
-PKG_LONGDESC="A VA-API implemention using NVIDIA's NVDEC"
+PKG_LONGDESC="A VA-API implementation using NVIDIA's NVDEC"
diff --git a/packages/readme.md b/packages/readme.md
@@ -98,7 +98,7 @@ But not always. To select a specific toolchain, you only need to set the `PKG_TO
 | configure   | preconfigured [GNU Build System](https://en.wikipedia.org/wiki/GNU_Build_System) |
 | ninja       | [Ninja Build](https://ninja-build.org/) |
 | make        | [Makefile Based](https://www.gnu.org/software/make/) |
-| manual      | only runs self writen build steps, see [Functions](#functions) |
+| manual      | only runs self written build steps, see [Functions](#functions) |
 
 ###### Auto-Detection
 The auto-detections looks for specific files in the source path.
@@ -158,8 +158,8 @@ Full list of overwrittable functions.
 | pre_build_\[stage]      | yes    | Runs before of the start of the build |
 | pre_configure<br>pre_configure_\[stage]<br>configure_\[stage]<br>post_configure_\[stage] | yes | Configure the package for the compile. This is only relevant for toolchain, that supports it (e.g. meson, cmake, configure, manual) |
 | make_\[stage]<br>pre_make_\[stage]<br>post_make_\[stage] | yes | Build of the package |
-| makeinstall_\[stage]<br>pre_makeinstall_\[stage]<br>post_makeinstall_\[stage] | yes | Installation of the files in the correct pathes<br>host: TOOLCHAIN<br>target: SYSROOT and IMAGE<br>bootstrap and init: temporary destination
-| addon                   | -      | Copy all files together for addon creation. This is requiered for addons |
+| makeinstall_\[stage]<br>pre_makeinstall_\[stage]<br>post_makeinstall_\[stage] | yes | Installation of the files in the correct paths<br>host: TOOLCHAIN<br>target: SYSROOT and IMAGE<br>bootstrap and init: temporary destination
+| addon                   | -      | Copy all files together for addon creation. This is required for addons |
 | post_install_addon      | -      | Post processing of installed addon files in `${INSTALL}` directory |
 
 ## Directory structure
@@ -271,7 +271,7 @@ Issue | Level | Meaning |
     * new kernel driver
     * ...
 2. Find a place in the packages tree
-    * look into the package tree structure, which is generally self explaind.
+    * look into the package tree structure, which is generally self explanitory.
     * do not place it in an existing package (directory that includes a `package.mk`)
     * when you found a place, create a directory with the name of your package (use same value for `PKG_NAME`!!)
 3. Create an initial `package.mk`
@@ -295,7 +295,7 @@ PKG_LICENSE="LGPL"
 PKG_SITE="https://mariadb.org/"
 PKG_URL="https://github.com/MariaDB/mariadb-connector-c/archive/v$PKG_VERSION.tar.gz"
 PKG_DEPENDS_TARGET="toolchain zlib openssl"
-PKG_LONGDESC="mariadb-connector: library to conntect to mariadb/mysql database server"
+PKG_LONGDESC="mariadb-connector: library to connect to mariadb/mysql database server"
 PKG_BUILD_FLAGS="-gold"
 
 PKG_CMAKE_OPTS_TARGET="-DWITH_EXTERNAL_ZLIB=ON \

diff --git a/packages/security/openssl/package.mk b/packages/security/openssl/package.mk
@@ -96,7 +96,7 @@ post_makeinstall_target() {
     ln -sf /run/libreelec/cacert.pem ${INSTALL}/etc/ssl/cacert.pem
     ln -sf /run/libreelec/cacert.pem ${INSTALL}/etc/ssl/cert.pem
 
-  # backwards comatibility
+  # backwards compatibility
   mkdir -p ${INSTALL}/etc/pki/tls
     ln -sf /run/libreelec/cacert.pem ${INSTALL}/etc/pki/tls/cacert.pem
   mkdir -p ${INSTALL}/etc/pki/tls/certs

diff --git a/packages/sysutils/busybox/scripts/apt-get b/packages/sysutils/busybox/scripts/apt-get
@@ -9,7 +9,7 @@ message="$message\n "
 message="$message\n 'apt-get' is a command to install, update and remove software which"
 message="$message\n is stored in a non local repo. 'apt-get' does nothing then connecting to such"
 message="$message\n repo, downloads the software, unpacks the software, updates a big"
-message="$message\n local database with all filepaths and other informations about the"
+message="$message\n local database with all filepaths and other information about the"
 message="$message\n installed software or removes or updates installed Software."
 message="$message\n "
 message="$message\n With LibreELEC it is not possible to change the system for security and"

diff --git a/packages/sysutils/busybox/scripts/createlog b/packages/sysutils/busybox/scripts/createlog
@@ -104,7 +104,7 @@ mkdir -p $BASEDIR/$LOGDIR
     getlog_cmd cat /storage/.config/shutdown.sh
   fi
   getlog_cmd ls -laR /storage/.config/system.d
-  # note: we dont add .mount units here as they may contan
+  # note: we dont add .mount units here as they may contain
   # login credentials
   for i in /storage/.config/system.d/*.service ; do
     if [ -f "$i" ] && [ ! -L "$i" ]; then

diff --git a/packages/sysutils/busybox/scripts/fs-resize b/packages/sysutils/busybox/scripts/fs-resize
@@ -20,7 +20,7 @@ if [ -e /storage/.please_resize_me ] ; then
   date -Iseconds >>$LOG
 
   # this sh** was never intended to be used
-  # on already installed and runing system
+  # on an already installed and running system
   if [ -d /storage/.kodi -o -d /storage/.config -o -d /storage/.cache ] ; then
     rm -f /storage/.please_resize_me
     sync

diff --git a/packages/sysutils/busybox/scripts/getedid b/packages/sysutils/busybox/scripts/getedid
@@ -136,7 +136,7 @@ create_edid() {
 }
 
 intel_amd() {
-  # check which output is connnected:
+  # check which output is connected:
   counter=0
   for i in /sys/class/drm/*; do
     if [ "$(cat "$i"/status 2>/dev/null)" = "connected" ]; then

diff --git a/packages/sysutils/busybox/scripts/getedid-drm b/packages/sysutils/busybox/scripts/getedid-drm
@@ -20,7 +20,7 @@ delete_edid() {
 create_edid() {
   CONNECTORS=$(dump-active-edids -q)
   if [ $? -ne 0 -o -z "${CONNECTORS}" ]; then
-    echo "error: cannot detemine active connectors"
+    echo "error: cannot determine active connectors"
     exit 1
   fi
   create-edid-cpio -q

diff --git a/packages/sysutils/busybox/scripts/init b/packages/sysutils/busybox/scripts/init
@@ -653,7 +653,7 @@ check_out_of_space() {
     echo "free space on /storage to complete the update!"
     echo ""
     echo "Please free up space on your /storage partition"
-    echo "by deleting unecessary files, then try again."
+    echo "by deleting unnecessary files, then try again."
     echo ""
     return 0
   else

diff --git a/packages/sysutils/eventlircd/udev.d/98-eventlircd.rules b/packages/sysutils/eventlircd/udev.d/98-eventlircd.rules
@@ -2,7 +2,7 @@
 # An example udev rules file for eventlircd.
 #
 # This rules file does not start eventlircd. Many applications only check for
-# the lircd socket at application lauch. Therefore, it is better to start
+# the lircd socket at application launch. Therefore, it is better to start
 # eventlircd in an init script so that eventlircd creates the lircd socket
 # before any applications that use LIRC launch.
 ################################################################################

diff --git a/packages/sysutils/systemd/config/system.d/cifs.mount.sample b/packages/sysutils/systemd/config/system.d/cifs.mount.sample
@@ -15,8 +15,8 @@ Requires=network-online.service
 # 'network-online.service' fails we can not mount and this scripts fails too
 After=network-online.service
 
-# usually we mount networks shares because we want they avaible *before* XBMC starts.
-# so XBMC has access to this mounts from beginning. Note: this slows down the boot!
+# usually we mount network shares because we want them available *before* Kodi starts.
+# so Kodi has access to mounts from the beginning. Note: this slows down the boot sequence!
 Before=kodi.service
 
 

diff --git a/packages/sysutils/systemd/config/system.d/nfs.mount.sample b/packages/sysutils/systemd/config/system.d/nfs.mount.sample
@@ -15,8 +15,8 @@ Requires=network-online.service
 # 'network-online.service' fails we can not mount and this scripts fails too
 After=network-online.service
 
-# usually we mount networks shares because we want they avaible *before* XBMC starts.
-# so XBMC has access to this mounts from beginning. Note: this slows down the boot!
+# usually we mount network shares because we want them available *before* Kodi starts.
+# so Kodi has access to mounts from the beginning. Note: this slows down the boot sequence!
 Before=kodi.service
 
 

diff --git a/packages/sysutils/systemd/package.mk b/packages/sysutils/systemd/package.mk
@@ -128,7 +128,7 @@ post_makeinstall_target() {
   safe_remove ${INSTALL}/usr/lib/tmpfiles.d/home.conf
   safe_remove ${INSTALL}/usr/share/factory
 
-  # remove Network adaper renaming rule, this is confusing
+  # remove Network adapter renaming rule, this is confusing
   safe_remove ${INSTALL}/usr/lib/udev/rules.d/80-net-setup-link.rules
 
   safe_remove ${INSTALL}/usr/lib/udev/rules.d/71-seat.rules

diff --git a/packages/sysutils/udevil/config/udevil.conf b/packages/sysutils/udevil/config/udevil.conf
@@ -253,7 +253,7 @@ allowed_options_exfat     = nosuid, noexec, nodev, noatime, ro, rw, uid=$UID, gi
 
 
 # mount_point_mode, if present and set to a non-empty value, will cause udevil
-# to set the mode (permissions) on the moint point after mounting  If not
+# to set the mode (permissions) on the mount point after mounting  If not
 # specified or if left empty, the mode is not changed.  Mode must be octal
 # starting with a zero (0755).
 # mount_point_mode_FSTYPE, if present, is used to override mount_point_mode
@@ -285,7 +285,7 @@ allowed_options_exfat     = nosuid, noexec, nodev, noatime, ro, rw, uid=$UID, gi
 # validation of a mount or unmount command, beyond the checks performed by
 # udevil.  The program is run as a normal user (if root runs udevil,
 # validate_exec will NOT be run).  The program is NOT run if the user is
-# mounting a device without root priviledges (a device in fstab).
+# mounting a device without root privileges (a device in fstab).
 # The program is passed the username, a printable description of what is
 # happening, and the entire udevil command line as the first three arguments.
 # The program must return an exit status of 0 to allow the mount or unmount

diff --git a/packages/tools/installer/scripts/installer b/packages/tools/installer/scripts/installer
@@ -94,7 +94,7 @@ get_device_unmount() {
 }
 
 get_partition() {
-  # get all partitions of a specifed device
+  # get all partitions of a specified device
   # usage:    get_partitions /dev/sda
   # uses:     -
   # provides: PARTITIONS

diff --git a/packages/wayland/compositor/sway/config/config b/packages/wayland/compositor/sway/config/config
@@ -3,7 +3,7 @@
 # Copy this to ~/.config/sway/config and edit it to your liking.
 #
 # Read `man 5 sway` for a complete reference.
-# Load prefered color scheme
+# Load preferred color scheme
 include colorscheme
 # Logo key. Use Mod1 for Alt.
 set $mod Mod4

diff --git a/packages/x11/lib/libXau/package.mk b/packages/x11/lib/libXau/package.mk
@@ -9,7 +9,7 @@ PKG_LICENSE="OSS"
 PKG_SITE="https://www.X.org"
 PKG_URL="https://xorg.freedesktop.org/archive/individual/lib/${PKG_NAME}-${PKG_VERSION}.tar.xz"
 PKG_DEPENDS_TARGET="toolchain util-macros xorgproto"
-PKG_LONGDESC="X authorization file management libary"
+PKG_LONGDESC="X authorization file management library"
 PKG_BUILD_FLAGS="+pic"
 
 PKG_MESON_OPTS_TARGET="-Ddefault_library=static \

diff --git a/projects/Amlogic/bootloader/install b/projects/Amlogic/bootloader/install
@@ -10,7 +10,7 @@ FIPDIR="$(get_build_dir amlogic-boot-fip)"
 
 case "${UBOOT_SYSTEM}" in
   box|"")
-    # no-op, use vendor booloader
+    # no-op, use vendor bootloader
     ;;
   *)
     mkdir "${DESTDIR}/tmp"

diff --git a/scripts/checkdeps b/scripts/checkdeps
@@ -289,7 +289,7 @@ if [ "${#need_map[@]}" -gt 0 ]; then
   fi
 fi
 
-# check if installed packages satisifed deps
+# check if installed packages satisfied deps
 get_deps
 
 if [ "${#need_map[@]}" -gt 0 ]; then

diff --git a/scripts/create_addon b/scripts/create_addon
@@ -15,7 +15,7 @@ DESCRIPTION
        create_addon builds one or more addons.
 
        --show-only
-              output the list of packages, which are intented to build
+              output the list of packages, which are intended to build
 
        --help shows this message
 
@@ -79,7 +79,7 @@ get_addons() {
 
     validpkg="no"
     VERIFY_FAIL=
-    # Should only build embedded addons when they are explictly specified in the addon list
+    # Should only build embedded addons when they are explicitly specified in the addon list
     if [ "${PKG_IS_ADDON}" = "embedded" ]; then
       if [ -n "${filter}" ]; then
         verify_addon && validpkg="yes"

diff --git a/scripts/create_docker_package b/scripts/create_docker_package
@@ -93,7 +93,7 @@ case "${ARCH}" in
         projects="Generic"
         ;;
     *)
-        echo "Unkown project"
+        echo "Unknown project"
         exit 1
         ;;
 esac

diff --git a/scripts/genbuildplan.py b/scripts/genbuildplan.py
@@ -346,7 +346,7 @@ def processPackages(args, packages):
                     help="Space-separated list of build trigger packages, either for host or target. Required property - specify at least one package.")
 
 parser.add_argument("--warn-invalid", action="store_true", default=False, \
-                    help="Warn about invalid/missing dependency packages, perhaps excluded by a PKG_ARCH incompatability. Default is to abort.")
+                    help="Warn about invalid/missing dependency packages, perhaps excluded by a PKG_ARCH incompatibility. Default is to abort.")
 
 parser.add_argument("--ignore-invalid", action="store_true", default=False, \
                     help="Ignore invalid packages.")

diff --git a/scripts/pkgbuilder.py b/scripts/pkgbuilder.py
@@ -173,7 +173,7 @@ def getNextJob(self):
             self.check_no_deps = False
 
         # Process remaining jobs, trying to schedule
-        # only those jobs with all their dependencies satisifed
+        # only those jobs with all their dependencies satisfied
         for i, job in enumerate(self.work):
             if self.canBuildJob(job):
                 self.building[job["name"]] = True

diff --git a/scripts/uboot_helper b/scripts/uboot_helper
@@ -7,7 +7,7 @@ import argparse
 
 # When adding new devices to the list please keep them in alphabetical order
 # board-name should contain 'dashes' (-) not 'underscores' (_) and shouldn't contain capitals
-# you can check the formating using an online tool such as https://codebeautify.org/python-formatter-beautifier
+# you can check the formatting using an online tool such as https://codebeautify.org/python-formatter-beautifier
 
 #  'project' : {
 #    'device' : {

diff --git a/tools/RPi/gen-rpi-kodi-patch.sh b/tools/RPi/gen-rpi-kodi-patch.sh
@@ -4,7 +4,7 @@ set -e
 BIN=$(readlink -f $(dirname $0))
 
 if git rev-parse --is-inside-work-tree &>/dev/null; then
-  echo "Don't run this script inside a git reppository!"
+  echo "Don't run this script inside a git repository!"
   exit 1
 fi
 

diff --git a/tools/download-cleaner b/tools/download-cleaner
@@ -87,7 +87,7 @@ for SOURCE_PACKAGE in $(find "${SOURCES}/" -mindepth 1 -type d); do
     CUR_PACKAGE_FILE=$(basename "${PACKAGE_SOURCE_FILE}")
 
     for FILE in $(find "${SOURCE_PACKAGE}/" -type f); do
-      # don't test auxilliary files
+      # don't test auxiliary files
       if [[ "${FILE}" = *.url ]] || [[ "${FILE}" = *.sha256 ]]; then
         continue
       fi
-Original file line number
+Diff line change
@@ Expand Up / @@ -93,7 +93,7 @@ case "${ARCH}" in @@
             projects="Generic"
             ;;
         *)
-            echo "Unkown project"
+            echo "Unknown project"
             exit 1
             ;;
     esac
@@ Expand Down @@