Skip to content

Python Interface to the MRASL/DECAR UWB Modules

Notifications You must be signed in to change notification settings

MRASL/uwb_interface

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Python Interface to the MRASL/DECAR UWB Modules

This python package provides a basic API to UWB modules, allowing a user to initiate and collect ranging data between devices, as well as data transfer and broadcast capabilities between UWB devices. A 10-min introductory video on how to install and use this package can be found here.

A simple example

from pyuwb import UwbModule, find_uwb_serial_ports

# Find all ports with a UWB module connected
ports = find_uwb_serial_ports()

# Create two UwbModule instances 
uwb0 = UwbModule(ports[0], verbose=True)
uwb1 = UwbModule(ports[0], verbose=True)

# Get the ID of each module
id0 = uwb0.get_id()
id1 = uwb1.get_id()

# Do a ranging transaction between the two modules
range_data = uwb0.do_twr(target_id = id1["id"]])

# Print the range measurement
print(range_data["range"])

Installation

Python 3.6 or greater is required. Clone this repo, and inside this repo's directory, execute

pip3 install -e .

to install the package in-place, allowing you make changes to the code without having to reinstall every time.

This repository assumes that the UWB modules are running the firmware from our package uwb_firmware, which can be found here.

The USB serial message format

We adopt a command/response (or request/response) style where the PC (referred to as the client) sends command messages over USB to the UWB module, which then performs some function and returns a response.

Depending on the command, the actual message that is ultimately sent as a sequence of bytes, will differ in structure. Hence, for each different command, there exists a predefined message format specifier. An example is

C99 "string,float,int" 

This says that command #99 will have a string field, followed by a float field, followed by an integer field, all separated by commas. All messages are prefixed by the message ID, and terminated by "\r". This lets the receiver know the message format. An example corresponding to the above is

"C99,hello,1.123456,44\r"

If an empty response is expected, the message specifier would be R99 "", and a response would look like

"R99\r"

An empty response is essentially just an acknowledgement that the message was received and things are operating normally. The field type specifiers used are those from the following table: https://docs.python.org/3/library/struct.html#format-characters.

Commands

We have a list of pre-programmed default commands. All commands and responses are signed with a Cxx and Rxx prefix, respectively. The xx is the message ID, which is a two-digit number. A response to a specific command will have the same message ID as the command.

The supported commands are as follows.

ID Python Message Response Description
C00 uwb.set_idle() "C00\r" "R00\r" Set the UWB module to idle mode
C01 uwb.get_id() "C01\r" "R01,3\r" Get the ID of the UWB module
C02 uwb.reset() "C02\r" "R02\r" Reset the UWB module
C03 uwb.do_tests() "C03\r" "R03,1\r" Run a series of tests
C04 uwb.toggle_passive(toggle = 1) "C04,1\r" "R04\r" Toggle passive listening mode
C05 uwb.do_twr(target_id = 1) "C05,1\r" "R05,1.2345\r" Initiate a TWR transaction
C06 uwb.broadcast(b"example") "C06,example\r" "R06\r" Broadcast a message
C07 uwb.get_max_frame_length() "C07\r" "R07,100\r" Get max frame length
C08 uwb.set_response_delay(delay=1500) "C08,1500\r" "R08\r" Set delay for 2nd response in DS-TWR

The above table shows a sample of the most basic functionality. Many of these commands have additional optional arguments that can be passed to customize the behavior for a wide variety of applications, and these arguments can modify the form of the message and response.

Callbacks and spontaneous messages

In addition to the command/response style, the UWB module firmware can also send spontaneous messages to the PC without being commanded to do so. These messages are signed with a Sxx prefix. To handle these messages, we have a callback system, where a user can register a callback function to be called whenever a message with a specific message ID is received. The callback function will be called with the message fields as arguments.

The supported spontaneous messages are as follows.

ID Description
S01 A message published by a passively-listening UWB module that was not participating in a TWR transaction.
S05 A message similar to R05, where the publisher is the non-initiating side of a TWR transaction. Usually means uwb.do_twr() was called with argument meas_at_target set to True.
S06 A generic non-ranging message was received. Usually means uwb.broadcast() was called.
S10 A channel impulse response (CIR) message was received. Usually means uwb.do_twr() was called with argument get_cir set to True. This message could be published by an initiating UWB module, a non-initiating UWB module, or a passively-listening UWB module.

To assign a callback to a spontaneous message, we can use the uwb.register_callback() function. For example, to print the CIR measurement whenever a S10 message is received, we can add the following code to our Python script.

def cir_callback(data, my_id):
    msg = {}
    msg["from_id"] = data[0]
    msg["to_id"] = data[1]
    msg["idx"] = data[2] + data[3] / 1e3
    msg["cir"] = data[4:]
    print("CIR " + str(my_id), msg)

uwb0.register_cir_callback("S10", cir_callback, id0['id'])
uwb1.register_cir_callback("S10", cir_callback, id1['id'])

Note that we could have used the uwb.register_cir_callback() function instead, which is just a wrapper for uwb.register_callback() that automatically sets the message ID to S10.

Backend architecture

For the message-sending and callback-triggering features to coexist simultaneously, we have divided the backend into three separate processes. Three processes (which includes the main starting process) are created whenever a user creates a UwbModule() instance.

Process 1: Main Process

This is the same process in which UwbModule() is instantiated, as well as where user-triggered commands such as uwb.get_id() are called.

Process 2: Serial monitor

This is a process that is constantly reading the USB serial output for messages from the firmware. It searches for recognized message prefixes such as R01. If one is detected, the message is parsed and the message fields are converted to their corresponding types. The parsed results are then sent to two places:

  1. A dictionary that holds the latest values for any specific message prefix. This is so that functions from the main process can come collect their responses.

  2. Added to a message queue, which is used to trigger callbacks as described by the next process.

Process 3: Callback dispatcher

This process continuously monitors the message queue described above, looping through any messages in the queue, executing callbacks registered for that message prefix. Hence, when a user experiences a callback call, it is inside a different process (this one) than the main process. Process 3 and Process 1 are user-facing processes, whereas Process 2 is strictly internal.

About

Python Interface to the MRASL/DECAR UWB Modules

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%