🔧 Config @ section adjustments

MarlinFirmware · Nov 3, 2024 · 72bf822 · 72bf822
1 parent 07f1136
commit 72bf822
Show file tree

Hide file tree

Showing 376 changed files with 5,264 additions and 3,760 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -73,6 +73,8 @@
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
+// @section serial
+
 /**
  * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -943,7 +945,7 @@
 //============================= Mechanical Settings =========================
 //===========================================================================
 
-// @section machine
+// @section kinematics
 
 // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
@@ -967,6 +969,15 @@
 // Enable for a belt style printer with endless "Z" motion
 //#define BELTPRINTER
 
+// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
+//#define ARTICULATED_ROBOT_ARM
+
+// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
+// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
+//#define FOAMCUTTER_XYUV
+
+// @section polargraph
+
 // Enable for Polargraph Kinematics
 //#define POLARGRAPH
 #if ENABLED(POLARGRAPH)
@@ -1153,15 +1164,6 @@
   #define FEEDRATE_SCALING                  // Convert XY feedrate from mm/s to degrees/s on the fly
 #endif
 
-// @section machine
-
-// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
-//#define ARTICULATED_ROBOT_ARM
-
-// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
-// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
-//#define FOAMCUTTER_XYUV
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@@ -3475,6 +3477,8 @@
  *   TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
  *   TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
  *   TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
+ *
+ * :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
  */
 //#define TFT_ROTATION TFT_NO_ROTATION
 

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -74,6 +74,8 @@
   #define MOTHERBOARD BOARD_MKS_BASE_14
 #endif
 
+// @section serial
+
 /**
  * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -945,7 +947,7 @@
 //============================= Mechanical Settings =========================
 //===========================================================================
 
-// @section machine
+// @section kinematics
 
 // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
@@ -969,6 +971,15 @@
 // Enable for a belt style printer with endless "Z" motion
 //#define BELTPRINTER
 
+// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
+//#define ARTICULATED_ROBOT_ARM
+
+// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
+// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
+//#define FOAMCUTTER_XYUV
+
+// @section polargraph
+
 // Enable for Polargraph Kinematics
 //#define POLARGRAPH
 #if ENABLED(POLARGRAPH)
@@ -1155,15 +1166,6 @@
   #define FEEDRATE_SCALING                  // Convert XY feedrate from mm/s to degrees/s on the fly
 #endif
 
-// @section machine
-
-// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
-//#define ARTICULATED_ROBOT_ARM
-
-// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
-// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
-//#define FOAMCUTTER_XYUV
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@@ -3501,6 +3503,8 @@
  *   TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
  *   TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
  *   TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
+ *
+ * :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
  */
 //#define TFT_ROTATION TFT_NO_ROTATION
 

diff --git a/config/examples/3DMatik/XL/Configuration.h b/config/examples/3DMatik/XL/Configuration.h
@@ -73,6 +73,8 @@
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
+// @section serial
+
 /**
  * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -943,7 +945,7 @@
 //============================= Mechanical Settings =========================
 //===========================================================================
 
-// @section machine
+// @section kinematics
 
 // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
@@ -967,6 +969,15 @@
 // Enable for a belt style printer with endless "Z" motion
 //#define BELTPRINTER
 
+// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
+//#define ARTICULATED_ROBOT_ARM
+
+// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
+// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
+//#define FOAMCUTTER_XYUV
+
+// @section polargraph
+
 // Enable for Polargraph Kinematics
 //#define POLARGRAPH
 #if ENABLED(POLARGRAPH)
@@ -1153,15 +1164,6 @@
   #define FEEDRATE_SCALING                  // Convert XY feedrate from mm/s to degrees/s on the fly
 #endif
 
-// @section machine
-
-// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
-//#define ARTICULATED_ROBOT_ARM
-
-// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
-// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
-//#define FOAMCUTTER_XYUV
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@@ -3475,6 +3477,8 @@
  *   TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
  *   TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
  *   TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
+ *
+ * :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
  */
 //#define TFT_ROTATION TFT_NO_ROTATION
 

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -73,6 +73,8 @@
   #define MOTHERBOARD BOARD_HJC2560C_REV1
 #endif
 
+// @section serial
+
 /**
  * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -943,7 +945,7 @@
 //============================= Mechanical Settings =========================
 //===========================================================================
 
-// @section machine
+// @section kinematics
 
 // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
@@ -967,6 +969,15 @@
 // Enable for a belt style printer with endless "Z" motion
 //#define BELTPRINTER
 
+// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
+//#define ARTICULATED_ROBOT_ARM
+
+// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
+// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
+//#define FOAMCUTTER_XYUV
+
+// @section polargraph
+
 // Enable for Polargraph Kinematics
 //#define POLARGRAPH
 #if ENABLED(POLARGRAPH)
@@ -1153,15 +1164,6 @@
   #define FEEDRATE_SCALING                  // Convert XY feedrate from mm/s to degrees/s on the fly
 #endif
 
-// @section machine
-
-// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
-//#define ARTICULATED_ROBOT_ARM
-
-// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
-// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
-//#define FOAMCUTTER_XYUV
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@@ -3476,6 +3478,8 @@
  *   TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
  *   TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
  *   TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
+ *
+ * :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
  */
 //#define TFT_ROTATION TFT_NO_ROTATION
 

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -73,6 +73,8 @@
   #define MOTHERBOARD BOARD_HJC2560C_REV2
 #endif
 
+// @section serial
+
 /**
  * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -943,7 +945,7 @@
 //============================= Mechanical Settings =========================
 //===========================================================================
 
-// @section machine
+// @section kinematics
 
 // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
@@ -967,6 +969,15 @@
 // Enable for a belt style printer with endless "Z" motion
 //#define BELTPRINTER
 
+// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
+//#define ARTICULATED_ROBOT_ARM
+
+// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
+// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
+//#define FOAMCUTTER_XYUV
+
+// @section polargraph
+
 // Enable for Polargraph Kinematics
 //#define POLARGRAPH
 #if ENABLED(POLARGRAPH)
@@ -1153,15 +1164,6 @@
   #define FEEDRATE_SCALING                  // Convert XY feedrate from mm/s to degrees/s on the fly
 #endif
 
-// @section machine
-
-// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
-//#define ARTICULATED_ROBOT_ARM
-
-// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
-// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
-//#define FOAMCUTTER_XYUV
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@@ -3476,6 +3478,8 @@
  *   TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
  *   TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
  *   TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
+ *
+ * :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
  */
 //#define TFT_ROTATION TFT_NO_ROTATION
 

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -111,6 +111,8 @@
   #define MOTHERBOARD BOARD_LONGER3D_LK
 #endif
 
+// @section serial
+
 /**
  * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -1012,7 +1014,7 @@
 //============================= Mechanical Settings =========================
 //===========================================================================
 
-// @section machine
+// @section kinematics
 
 // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
@@ -1036,6 +1038,15 @@
 // Enable for a belt style printer with endless "Z" motion
 //#define BELTPRINTER
 
+// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
+//#define ARTICULATED_ROBOT_ARM
+
+// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
+// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
+//#define FOAMCUTTER_XYUV
+
+// @section polargraph
+
 // Enable for Polargraph Kinematics
 //#define POLARGRAPH
 #if ENABLED(POLARGRAPH)
@@ -1222,15 +1233,6 @@
   #define FEEDRATE_SCALING                  // Convert XY feedrate from mm/s to degrees/s on the fly
 #endif
 
-// @section machine
-
-// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
-//#define ARTICULATED_ROBOT_ARM
-
-// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
-// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
-//#define FOAMCUTTER_XYUV
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@@ -3554,6 +3556,8 @@
  *   TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
  *   TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
  *   TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
+ *
+ * :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
  */
 //#define TFT_ROTATION TFT_NO_ROTATION