🔨 Move PIDTEMPCHAMBER

MarlinFirmware/Marlin#27562
MarlinFirmware · Dec 16, 2024 · f2e9fd3 · f2e9fd3
1 parent fec93fb
commit f2e9fd3
Show file tree

Hide file tree

Showing 377 changed files with 2,641 additions and 2,639 deletions.
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -211,18 +211,19 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
 
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/3DMatik/XL/Configuration_adv.h b/config/examples/3DMatik/XL/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/AliExpress/CL-260/Configuration_adv.h b/config/examples/AliExpress/CL-260/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)

diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h
@@ -211,18 +211,18 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
-
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)