- Connect the Debug and Target USBs of the SAME54 XPRO to the PC.
- Program the SAME54 XPRO with the production hex file available inside the firmware folder.
- Load the example scripts those you need to test in the USB E drive which will get enumerated in the PC.
- The EDBG com port will show "Rapid Prototyping with Micropython. . ."
- You can give
> mp command - to enter into Micropython command line mode where you can give python commands line by line and test
> mp exec "python_script_file_name.py" - To run any script that you have in your USB E drive
> mp reset - to reset the whole system
Once you are in the command line mode, pressing "CTRL + C" will help you get out of the command line mode
>> Pin Settings, Peripheral details implemented would be covered here. <<<<