Full integration of PirateAudioHAT

components/audio/Hifiberry/setup_Hifiberry.sh

@@ -0,0 +1,80 @@
+#!/usr/bin/env bash
+
+HOME_DIR="/home/pi"
+JUKEBOX_HOME_DIR="${HOME_DIR}/RPi-Jukebox-RFID"
+
+question() {
+    local question=$1
+    read -p "${question} (y/n)? " choice
+    case "$choice" in
+      y|Y ) ;;
+      n|N ) exit 0;;
+      * ) echo "Error: invalid" ; question ${question};;
+    esac
+}
+
+printf "Please make sure that the Hifiberry is connected...\n"
+question "Continue"
+
+printf "Adding settings to /boot/config.txt...\n"
+if [[ ! -f /boot/config.txt.bak ]]; then
+    sudo cp /boot/config.txt /boot/config.txt.bak
+fi
+
+if ! sudo grep -qe "dtoverlay=hifiberry-dac" /boot/config.txt; then
+    echo "dtoverlay=hifiberry-dac" | sudo tee -a /boot/config.txt > /dev/null
+fi
+
+printf "Adding settings to /etc/asound.conf...\n"
+# Create backup of /etc/asound.conf if it already exists
+if [[ -f /etc/asound.conf && ! -f /etc/asound.conf.bak ]]; then
+    sudo cp /etc/asound.conf /etc/asound.conf.bak
+fi
+
+# Do not add, but replace content if file already exists
+sudo tee /etc/asound.conf << EOF > /dev/null
+pcm.hifiberry {
+    type            softvol
+    slave.pcm       "plughw:CARD=sndrpihifiberry,DEV=0"
+    control.name    "Master"
+    control.card    1
+}
+pcm.!default {
+    type            plug
+    slave.pcm       "hifiberry"
+}
+ctl.!default {
+    type            hw
+    card            1
+}
+EOF
+
+# Create backup of /etc/mpd.conf if it already exists
+if [[ -f /etc/mpd.conf && ! -f /etc/mpd.conf.bak ]]; then
+    sudo cp /etc/mpd.conf /etc/mpd.conf.bak
+fi
+
+printf "Add hifiberry as audio_output in /etc/mpd.conf...\n"
+# Only add, if it does not exist already
+if ! sudo grep -qe "HiFiBerry DAC+ Lite" /etc/mpd.conf; then
+    sudo sed -i "/# An example of an ALSA output:/ r /dev/stdin" /etc/mpd.conf <<'EOG'
+audio_output {
+        enabled         "yes"
+        type            "alsa"
+        name            "HiFiBerry DAC+ Lite"
+        device          "hifiberry"
+        auto_resample   "no"
+        auto_channels   "no"
+        auto_format     "no"
+        dop             "no"
+}
+EOG
+else
+    printf "/etc/mpd.conf is already configured. Skipping...\n"
+fi
+
+printf "Set mixer_control name in /etc/mpd.conf...\n"
+mixer_control_name="Master"
+sudo sed -i -E "s/^(\s*mixer_control\s*\")[^\"]*(\"\s*# optional)/\1\\${mixer_control_name}\2/" /etc/mpd.conf
+
+printf "You should reboot later to apply the settings.\n"

components/audio/PirateAudioHAT/README.md

@@ -7,19 +7,21 @@ These instructions are for the following Pimoroni PirateAudio HATs:
 The PirateAudio HATs use the same DAC as the hifiberry, so some of the instructions
 from <https://github.com/MiczFlor/RPi-Jukebox-RFID/wiki/HiFiBerry-Soundcard-Details> can be applied as well.
 
-The `setup_pirateAudioHAT.sh` script can be used to set it up to work with Phoniebox.
+## Automatic Script
 
-## Install steps in writing
+Please use `setup_pirateAudioHAT.sh` script to set it up to work with Phoniebox.
+
+## Manual install steps (not recommended)
 
 (Discussions regarding *Pirate Audio HAT* should take place in the same thread where the below instructions were taken from: [#950](https://github.com/MiczFlor/RPi-Jukebox-RFID/issues/950)
 
 NOTE: changes to the installation should find their way into the script `setup_pirateAudioHAT.sh`. Please create pull requests *after* having tested your changes. :)
 
 1. Connect Pirate Audio Hat to your Raspberry Pi
-2. Install Phoniebox (develop branch!)
+2. Install Phoniebox
 3. Stop and disable the GPIO button service:
-   `sudo systemctl stop phoniebox-gpio-buttons.service`
-   `sudo systemctl disable phoniebox-gpio-buttons.service`
+   `sudo systemctl stop phoniebox-gpio-control.service`
+   `sudo systemctl disable phoniebox-gpio-control.service`
 4. Add the following two lines to /boot/config.txt
    `gpio=25=op,dh`
    `dtoverlay=hifiberry-dac`
@@ -76,4 +78,4 @@ NOTE: changes to the installation should find their way into the script `setup_p
     ```
 12. Enable access for modipy user
     `sudo usermod -a -G spi,i2c,gpio,video mopidy`
-13. Reboot Raspberry Pi
+13. Reboot Raspberry Pi

components/audio/PirateAudioHAT/phoniebox-pirateaudio-display.service.sample

@@ -0,0 +1,13 @@
+[Unit]
+Description=Phoniebox Pirate Audio Display Service
+After=network.target phoniebox-rfid-reader.service
+
+[Service]
+User=pi
+Group=pi
+Restart=always
+WorkingDirectory=/home/pi/RPi-Jukebox-RFID
+ExecStart=/home/pi/RPi-Jukebox-RFID/components/audio/PirateAudioHAT/pirate_audio_display.py
+
+[Install]
+WantedBy=multi-user.target

components/audio/PirateAudioHAT/pirate_audio_display.py

@@ -0,0 +1,47 @@
+#!/usr/bin/env python3
+
+from PIL import Image
+from PIL import ImageDraw
+from PIL import ImageFont
+import time
+
+import ST7789
+
+
+MESSAGE = "Hello World! How are you today?"
+
+# Create ST7789 LCD display class.
+disp = ST7789.ST7789(
+    port=0,
+    cs=ST7789.BG_SPI_CS_FRONT,  # BG_SPI_CSB_BACK or BG_SPI_CS_FRONT
+    dc=9,
+    backlight=19,               # 18 for back BG slot, 19 for front BG slot.
+    spi_speed_hz=80 * 1000 * 1000
+)
+
+# Initialize display.
+disp.begin()
+
+WIDTH = disp.width
+HEIGHT = disp.height
+
+
+img = Image.new('RGB', (WIDTH, HEIGHT), color=(0, 0, 0))
+
+draw = ImageDraw.Draw(img)
+
+font = ImageFont.truetype("/usr/share/fonts/truetype/dejavu/DejaVuSans-Bold.ttf", 30)
+
+size_x, size_y = draw.textsize(MESSAGE, font)
+
+text_x = disp.width
+text_y = (80 - size_y) // 2
+
+t_start = time.time()
+
+while True:
+    x = (time.time() - t_start) * 100
+    x %= (size_x + disp.width)
+    draw.rectangle((0, 0, disp.width, 80), (0, 0, 0))
+    draw.text((int(text_x - x), text_y), MESSAGE, font=font, fill=(255, 255, 255))
+    disp.display(img)

components/audio/PirateAudioHAT/requirements-mopidy.txt

@@ -0,0 +1,7 @@
+# PirateAudioHAT related  for spotify edition
+# You need to install these with `sudo python3 -m pip install --upgrade --force-reinstall -q -r requirements-mopidy.txt`
+
+Mopidy-PiDi
+mopidy-raspberry-gpio
+pidi-display-pil
+pidi-display-st7789

components/audio/PirateAudioHAT/requirements.txt

@@ -1,7 +1,4 @@
-# PirateAudioHAT related requirements
+# PirateAudioHAT related requirements (for classic edition)
 # You need to install these with `sudo python3 -m pip install --upgrade --force-reinstall -q -r requirements.txt`
 
-Mopidy-PiDi
-pidi-display-pil
-pidi-display-st7789
-mopidy-raspberry-gpio
+st7789

components/audio/PirateAudioHAT/setup_pirateAudioHAT.sh

@@ -3,6 +3,15 @@
 HOME_DIR="/home/pi"
 JUKEBOX_HOME_DIR="${HOME_DIR}/RPi-Jukebox-RFID"
 
+EDITION=$1
+
+if [[ -n "$EDITION" ]]; then
+    echo "Configuring Pirate Audio HAT for ${EDITION} edition"
+else
+    echo "Error: please pass classic or spotify to script."
+    exit -1
+fi
+
 question() {
     local question=$1
     read -p "${question} (y/n)? " choice
@@ -16,10 +25,11 @@ question() {
 printf "Please make sure that the Pirate Audio HAT is connected...\n"
 question "Continue"
 
-printf "Stopping and disabling GPIO button service...\n"
-#TODO this might not be necessary
-sudo systemctl stop phoniebox-gpio-buttons.service
-sudo systemctl disable phoniebox-gpio-buttons.service
+if [ "${EDITION}" == "spotify" ]; then
+    printf "Stopping and disabling GPIO control service...\n"
+    sudo systemctl stop phoniebox-gpio-control.service
+    sudo systemctl disable phoniebox-gpio-control.service
+fi
 
 printf "Adding settings to /boot/config.txt...\n"
 if [[ ! -f /boot/config.txt.bak ]]; then
@@ -30,75 +40,23 @@ fi
 if ! sudo grep -qe "gpio=25=op,dh" /boot/config.txt; then
     echo "gpio=25=op,dh" | sudo tee -a /boot/config.txt > /dev/null
 fi
-if ! sudo grep -qe "dtoverlay=hifiberry-dac" /boot/config.txt; then
-    echo "dtoverlay=hifiberry-dac" | sudo tee -a /boot/config.txt > /dev/null
-fi
 
-printf "Adding settings to /etc/asound.conf...\n"
-# Create backup of /etc/asound.conf if it already exists
-if [[ -f /etc/asound.conf && ! -f /etc/asound.conf.bak ]]; then
-    sudo cp /etc/asound.conf /etc/asound.conf.bak
-fi
-
-# Do not add, but replace content if file already exists
-sudo tee /etc/asound.conf << EOF > /dev/null
-pcm.hifiberry {
-    type            softvol
-    slave.pcm       "plughw:CARD=sndrpihifiberry,DEV=0"
-    control.name    "Master"
-    control.card    1
-}
-pcm.!default {
-    type            plug
-    slave.pcm       "hifiberry"
-}
-ctl.!default {
-    type            hw
-    card            1
-}
-EOF
-
-# Create backup of /etc/mpd.conf if it already exists
-if [[ -f /etc/mpd.conf && ! -f /etc/mpd.conf.bak ]]; then
-    sudo cp /etc/mpd.conf /etc/mpd.conf.bak
-fi
-
-printf "Add hifiberry as audio_output in /etc/mpd.conf...\n"
-# Only add, if it does not exist already
-if ! sudo grep -qe "HiFiBerry DAC+ Lite" /etc/mpd.conf; then
-    sudo sed -i "/# An example of an ALSA output:/ r /dev/stdin" /etc/mpd.conf <<'EOG'
-audio_output {
-        enabled         "yes"
-        type            "alsa"
-        name            "HiFiBerry DAC+ Lite"
-        device          "hifiberry"
-        auto_resample   "no"
-        auto_channels   "no"
-        auto_format     "no"
-        dop             "no"
-}
-EOG
-else
-    printf "/etc/mpd.conf is already configured. Skipping...\n"
-fi
-
-printf "Set mixer_control name in /etc/mpd.conf...\n"
-mixer_control_name="Master"
-sudo sed -i -E "s/^(\s*mixer_control\s*\")[^\"]*(\"\s*# optional)/\1\\${mixer_control_name}\2/" /etc/mpd.conf
+bash "${JUKEBOX_HOME_DIR}/component/audio/Hifiberry/setup_Hifiberry.sh"
 
 printf "Activating SPI...\n"
 sudo raspi-config nonint do_spi 0
 
 printf "Installing Python dependencies...\n"
 sudo apt-get -y -qq install python3-pil python3-numpy
 
-printf "Installing mopidy plugins...\n"
-sudo python3 -m pip install --upgrade --force-reinstall -q -r "${JUKEBOX_HOME_DIR}"/components/audio/PirateAudioHAT/requirements.txt
+if [ "${EDITION}" == "spotify" ]; then
+    printf "Installing Python packages...\n"
+    sudo python3 -m pip install --upgrade --force-reinstall -q -r "${JUKEBOX_HOME_DIR}"/components/audio/PirateAudioHAT/requirements-mopidy.txt
 
-# Only add, if it does not exist already
-printf "Editing mopidy configuration...\n"
-if ! sudo grep -qe "raspberry-gpio" /etc/mopidy/mopidy.conf; then
-    sudo tee -a /etc/mopidy/mopidy.conf << EOH > /dev/null
+    # Only add, if it does not exist already
+    printf "Editing mopidy configuration...\n"
+    if ! sudo grep -qe "raspberry-gpio" /etc/mopidy/mopidy.conf; then
+        sudo tee -a /etc/mopidy/mopidy.conf << EOH > /dev/null
 
 [raspberry-gpio]
 enabled = true
@@ -111,12 +69,28 @@ bcm20 = volume_up,active_low,150
 enabled = true
 display = st7789
 EOH
+    else
+        printf "/etc/mopidy/mopidy.conf is already configured. Skipping...\n"
+    fi
+
+    printf "Enable access for modipy user...\n"
+    sudo usermod -a -G spi,i2c,gpio,video mopidy
 else
-    printf "/etc/mopidy/mopidy.conf is already configured. Skipping...\n"
-fi
+    printf "Installing Python packages...\n"
+    sudo python3 -m pip install --upgrade --force-reinstall -q -r "${JUKEBOX_HOME_DIR}"/components/audio/PirateAudioHAT/requirements.txt
+
+    cp "${jukebox_dir}"/misc/sampleconfigs/gpio_settings.ini.pirate-audio-hat.sample "${jukebox_dir}"/settings/gpio_settings.ini
 
-printf "Enable access for modipy user...\n"
-sudo usermod -a -G spi,i2c,gpio,video mopidy
+    sudo cp "${jukebox_dir}"/misc/sampleconfigs/phoniebox-pirateaudio-display.service.sample "/etc/systemd/system/phoniebox-pirateaudio-display.service"
+    sudo chown root:root /etc/systemd/system/phoniebox-pirateaudio-display.service
+    sudo chmod 644 /etc/systemd/system/phoniebox-pirateaudio-display.service
+    # enable the services needed
+    sudo systemctl enable phoniebox-pirateaudio-display
+
+    # restart services
+    sudo systemctl restart phoniebox-gpio-control
+    sudo systemctl restart phoniebox-pirateaudio-display
+fi
 
 printf "You need to reboot to apply the settings.\n"
 question "Do you want to reboot now"

misc/sampleconfigs/gpio_settings.ini.pirate-audio-hat.sample

@@ -0,0 +1,34 @@
+[DEFAULT]
+enabled: True
+
+[PlayPause]
+enabled: True
+Type: Button
+Pin: 5
+pull_up: True
+bouncetime: 250
+functionCall: functionCallPlayerPause
+
+[VolumeUp]
+enabled: True
+Type:  Button
+Pin: 20
+pull_up: True
+bouncetime: 250
+functionCall: functionCallVolU
+
+[VolumeDown]
+enabled: True
+Type:  Button
+Pin: 6
+pull_up: True
+bouncetime: 250
+functionCall: functionCallVolD
+
+[NextSong]
+enabled: True
+Type:  Button
+Pin: 16
+pull_up: True
+bouncetime: 250
+functionCall: functionCallPlayerNext