0.96 I2C Display On Raspberry
First of all you have to install these packages with these commands:
sudo apt-get update
sudo apt-get install pip3
sudo apt-get install python3.7
sudo apt-get install git
sudo pip3 install time
sudo pip3 install sys
sudo pip3 install json
sudo pip3 install urllib.request
sudo pip3 install Adafruit_SSD1306
Now do:
sudo raspi-config
Interfacecing Options > I2C > yes > exit
Now do connect the display
GND>GND
VNC>3.3V
SLC>GPIO.3
SDA>GPIO.2
Now do:
git clone https://github.com/NewYorkCoinNYC/NewYorkCoin-raspberry
cd NewYorkCoin-raspberry
nano nycscreen.py
#edit this url with our wallet example:
go: url = "https://nycapiserver.newyorkcoin.xyz/balance/RWDyZSjfZMtJG4c6r3xDuUzA2tKrz7MGQB"
"https://nycapiserver.newyorkcoin.xyz/balance/your-address"
ctrl and x
#press y to save,then hit enter
now do:
watch -n 30 python3.7 nycscreen.py
If it doesn't work check if you have enetered the right url and check the ""
or
make sure the pin is not badly connected and make sure the display is not a 128x64 Pixel I2C