Build customized u-boot #10
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| name: Build customized u-boot | |
| on: | |
| workflow_dispatch: | |
| inputs: | |
| flash: | |
| description: 'Flash Type' | |
| required: true | |
| type: choice | |
| options: | |
| - 'NOR' | |
| - 'NAND' | |
| - 'NAND-NMBM' | |
| mtdparts: | |
| description: 'MTD Partition Table' | |
| required: true | |
| type: string | |
| default: '512k(u-boot),512k(u-boot-env),256k(factory),4096k(kernel),-(firmware)' | |
| kernel_offset: | |
| description: 'Kernel Load Address' | |
| required: true | |
| type: string | |
| default: '0x80001000' | |
| reset_pin: | |
| description: 'Reset Button GPIO' | |
| required: true | |
| type: number | |
| default: 3 | |
| sysled_pin: | |
| description: 'System LED GPIO' | |
| required: true | |
| type: number | |
| default: 13 | |
| cpufreq: | |
| description: 'CPU Frequency (400 - 1200)' | |
| required: true | |
| type: number | |
| default: '880' | |
| ramfreq: | |
| description: 'DRAM Frequency' | |
| required: true | |
| type: choice | |
| options: | |
| - '400' | |
| - '800' | |
| - '1066' | |
| - '1200' | |
| default: '1200' | |
| ddrparam: | |
| description: 'Prefered DDR Init Parameters' | |
| required: true | |
| type: choice | |
| options: | |
| - 'DDR2-64MiB' | |
| - 'DDR2-128MiB' | |
| - 'DDR2-W9751G6KB-64MiB-1066MHz' | |
| - 'DDR2-W971GG6KB25-128MiB-800MHz' | |
| - 'DDR2-W971GG6KB18-128MiB-1066MHz' | |
| - 'DDR3-128MiB' | |
| - 'DDR3-256MiB' | |
| - 'DDR3-512MiB' | |
| - 'DDR3-128MiB-KGD' | |
| oldparam: | |
| description: 'Use Old DDR Timing Parameters' | |
| required: true | |
| type: boolean | |
| default: 'false' | |
| baudrate: | |
| description: 'Baud Rate' | |
| required: true | |
| type: choice | |
| options: | |
| - '57600' | |
| - '115200' | |
| jobs: | |
| build: | |
| name: Build MT7621 u-boot | |
| runs-on: ubuntu-latest | |
| strategy: | |
| fail-fast: False | |
| steps: | |
| - name: Checkout master directory | |
| uses: actions/checkout@v3 | |
| with: | |
| path: uboot-mt7621 | |
| - name: Install essential packages | |
| run: | | |
| sudo apt-get update | |
| sudo apt-get install swig python2-dev | |
| echo 'switch to python2 as default' | |
| sudo rm /usr/bin/python | |
| sudo ln -s /usr/bin/python2 /usr/bin/python | |
| - name: Download OpenWrt toolchain | |
| run: | | |
| wget -O - https://github.com/DragonBluep/uboot-mt7621/releases/download/20230517/openwrt-toolchain-ramips-mt7621_gcc-12.3.0_musl.Linux-x86_64.tar.xz \ | |
| | tar --xz -xf - | |
| - name: Set old DDR timing parameters | |
| if: ${{ inputs.oldparam }} | |
| working-directory: uboot-mt7621 | |
| run: sed -i 's/0x0C000000/0x0A000000/g' ./arch/mips/mach-mt7621/dramc-legacy/dramc.S | |
| - name: Compile | |
| working-directory: uboot-mt7621 | |
| run: | | |
| ./customize.sh '${{ inputs.flash }}' '${{ inputs.mtdparts }}' '${{ inputs.kernel_offset }}' '${{ inputs.reset_pin }}' \ | |
| '${{ inputs.sysled_pin }}' '${{ inputs.cpufreq }}' '${{ inputs.ramfreq }}' '${{ inputs.ddrparam }}' '${{ inputs.baudrate }}' | |
| - name: Upload binaries | |
| uses: actions/upload-artifact@v3 | |
| with: | |
| name: u-boot | |
| path: "uboot-mt7621/archive/" |