This is a simple Round Display to monitor my Voron 2.4 It uses a Waveshare round display. And it is a Display only mod since I tend to do everthing through the webinterface. So I just wanted a cool looking display that would show me the Bed/extruder temp and the print progress for when I pop into the room.
The holder for the display is 50mm smaller then the standard display, this means you'll have to print the voron skirts that are 1 size larger (not tested yet...working on building my V2 as we speak). I developed this for my 250mm build so I thought that this display would look beter on a small frame, it may look a bit silly on a large frame.
This is just the beginning, I'm still in the proccess of learning Mainsail so my first step is to power the display off an ESP32, once this is done I will work on developing a Raspberry PI version and run it right off the PI.
If you have some knoledge of Moonraker or Raspberry Pi programming, drop by a line, I hang around in CanadaLand on the voron Discord (QuinFromCanada#5297).
Display affiliate link(helps the channel): https://amzn.to/3B97Gc3
Display Info: https://www.waveshare.com/product/displays/lcd-oled/lcd-oled-3/1.28inch-lcd-module.htm https://www.waveshare.com/wiki/1.28inch_LCD_Module