This repository presents a novel version of the RIPE benchmark, thought for Microcontroller that runs FreeRTOS.
RIPE was originally developed by John Wilander and Nick Nikiforakis and the paper was presented at The 27th Annual Computer Security Applications Conference (ACSAC) in Orlando, Florida, December 5-9, 2011.
Currently, the only architecture supported is the Cortex-M4. Currently, we aim to support the following boards:
| MCU | Boards | Board name | |
|---|---|---|---|
| F4 | |||
| STM32F407VGT | STM32F4-Discovery | stm32f4-discovery | |
| STM32F429ZI | STM32 Nucleo-144 | nucleo-144 |
No hardware yet? Don't worry! You can try to run the benchmark on a virtalized environment. We aim to support the following virtualized boards.
| MCU | Boards | Board name | |
|---|---|---|---|
| STM32F405RG | Netduino-Plus 2 | netduinoplus2 |
To execute the benchmark on a virtualized board, you will need QEMU. Here you can find some info about installing QEMU on your host machine.
To get the full support to netduinoplus2 board, you must install QEMU v6 or above.
This benchmark is released as a FreeRTOS/Demo. Typically, Demos are a way to create new Applications taking advantage of FreeRTOS kernel and libraries. We ship the benchmark as a FreeRTOS/Demo to make it simpler execute it on your board.
Do you want to execute this benchmark on a different board? It should be not difficult to realize a Demo application for your board. You can start reading from this page
The following setup is valid only for Linux host machines. If you are using Windows or MacOS consider we cannot guarantee you will be able to setup the environment.
The list of dependencies depends on the target board you are using, but at least you need:
- Make
- python3
- GNU Cross-Compile toolchain for ARM. Commonly, you can install the toolchain also by means of your packet manager (i.e.
apt install gcc-arm-none-eabi) - An editor/IDE! We provide some launch and debug actions for Visual Studio Code.
Target dependent or optional tools:
- A programmer for your board. We currently support stlink. OpenOCD could be fine too, but it is not tested.
- QEMU if you intend to execute the benchmark in a virtualized environment.
- GDB if you want to debug your code. Note, you need the multi-architecture version or the one offered with ARM Toolchain.
Clone this repository directly in the FreeRTOS demo folder
# starting from FreeRTOS root folder
cd FreeRTOS/Demo
git clone [email protected]:RHESGroup/embedded-ripe.git CORTEX_M4F_STM32_QEMU_GCC
Change into build folder and run the make command.
cd CORTEX_M4F_STM32_QEMU_GCC/build
make <target> # could be 'qemu' / 'nucleo' / 'discovery'
Then, to flash the binary into the board (or load it into QEMU) you can execute
make <target>-run
Using GDB (the version provided by ARM toolchain or the multi architecture one), you can debug the benchmark step by step.
Debug on hardware target
To debug the code on the hardware target, connect the board to the host machine and run
make <target>-debug
The make target above launch the st-util binary (comes with stlink package) that it will connect to the board programmer and will act as a GDB-server. Then you can launch
gdb-multiarch --target-remote localhost:4242
or you the launch configuration provided if you are working with VS Code.
Debug on QEMU
To debug the code on QEMU, launch QEMU with
make qemu-debug
The make target above launch QEMU with the debug flag. The, you can attach your GDB session with
gdb-multiarch --target-remote localhost:1234
or you the launch configuration provided if you are working with VS Code.
Originally, in 2011, the RIPE benchmark was developed for x86 architecture.
In 2018, Draper Labs realized a port for risc-V architecture, called hope-RIPE
The RIPE port to RISC-V was developed by John Merrill. RIPE for RISC-V is designed for use with the Spike simulator.
Hubert Rosier realized a port for x86-64, called RIPE64.
This port was developed by Hubert ROSIER for an academic project in the National University of Singapore. The project was supervised by Professor Roland YAP and co-supervisor senior research fellow Gregory James DUCK of the School of Computing of the National University of Singapore.
Gabriele Serra realized improved the benchmark implementing a hardware abstraction layer and re-implementing attacks for ARM 64 architecture. The project is a fork of the original one and integrates the subsequent versions.
The HAL and the
aarch64port was developer by Gabriele Serra a PhD student at Scuola Superiore Sant'Anna, Pisa. The project is still under development and currently there is no working version. Contributions are welcome.
This repository would not host any of the material for the previous projects. Unfortunately, to implement a benchmark for Microntroller without any assumption of their architecture features and OS running configuration requires some heavy modification of the original idea. Hence, this repository exploit the RIPE idea but does not make use of any of the previous contributions.
Currently, this version of supports the following attack parameters:
- Location can be:
stack,bssordata - Target pointer can be:
ret,funcptrorstructfuncptr - Target function can be:
strcpy,strncpy,memcpy,memmoveorhomebrew(a loop-based equivalent version of memcpy) - Attack code can be
injected-svc,injected-svc-nop,reused-svc
The overflow location describes the memory section in which the target buffer is located.
The target code pointer represents the pointer exploited by the specific attack. It transfers the control flow to the appropriate offset to trigger the payload.
Em-RIPE uses 5 vulnerable functions as attack entry points. Such functions from allow to copy part of a string from a source buffer to a destination buffer.
The attack code represents the payload that an intruder may want to get running through a buffer overflow exploit.
RIPE was originally released under the MIT licence.
Subsequent modification and porting to other architectures were still released under the MIT license.
If you use, extend or build upon RIPE we kindly ask you to cite the original ACSAC paper in which RIPE is presented. Here's the BibTeX:
@inproceedings{ wilander.ripe,
author = {John Wilander and Nick Nikiforakis and Yves Younan and Mariam Kamkar and Wouter Joosen},
title = {{RIPE}: Runtime Intrusion Prevention Evaluator},
booktitle = {In Proceedings of the 27th Annual Computer Security Applications Conference, {ACSAC}},
year = {2011},
publisher = {ACM}
}