Merge pull request #20734 from krzysztof-cabaj/stm32l476g-disco-cpy2r…

…emed

boards/stm32l476g-disco: enable cpy2remed

boards/stm32l476g-disco/Makefile.include

@@ -9,5 +9,8 @@ OPENOCD_DEBUG_ADAPTER ?= stlink
 # use connect_assert_srst to always be able to flash or reset the board.
 OPENOCD_RESET_USE_CONNECT_ASSERT_SRST ?= 1
 
-# openocd programmer is supported
-PROGRAMMERS_SUPPORTED += openocd
+# openocd and cpy2remed programmer is supported
+PROGRAMMERS_SUPPORTED += openocd cpy2remed
+
+#needed by cpy2remed
+DIR_NAME_AT_REMED = "DIS_L476VG"

boards/stm32l476g-disco/doc.txt

@@ -0,0 +1,60 @@
+/**
+ * @defgroup    boards_stm32l476g-disco STM32L476G-DISCO
+ * @ingroup     boards
+ * @brief       Support for the STM32L476G-DISCO board.
+
+## Overview
+
+The STM32L476GDISCOVERY is an evaluation board with the ARM Cortex-M4 based
+ultra-low power microcontroller STM32L476VGT6 with 128KiB of RAM and 1MiB of
+ROM Flash.
+
+### Hardware
+
+![STM32L476G-DISCO](https://www.st.com/bin/ecommerce/api/image.PF261635.en.feature-description-include-personalized-no-cpn-medium.jpg)
+
+### MCU
+
+| MCU        |   STM32L476VG      |
+|:---------- |:------------------ |
+| Family     | ARM Cortex-M4      |
+| Vendor     | ST Microelectronics|
+| RAM        | 128KiB             |
+| Flash      | 1MiB               |
+| Frequency  | up to 80MHz        |
+| FPU        | yes                |
+| Timers     | 16 (2x watchdog, 1 SysTick, 6x 16-bit, 2x 32-bit [TIM2])  |
+| ADCs       | 1x 12-bit          |
+| UARTs      | 3 (two UARTs and one Low-Power UART)                 |
+| SPIs       | 3                  |
+| I2Cs       | 3                  |
+| RTC        | 1                  |
+| CAN        | 1                  |
+| Vcc        | 1.71 V - 3.6V      |
+| Datasheet  | [Datasheet](https://www.st.com/resource/en/datasheet/stm32l476je.pdf) |
+| Reference Manual | [Reference Manual](http://www.st.com/content/ccc/resource/technical/document/reference_manual/02/35/09/0c/4f/f7/40/03/DM00083560.pdf/files/DM00083560.pdf/jcr:content/translations/en.DM00083560.pdf) |
+| Programming Manual | [Programming Manual](http://www.st.com/content/ccc/resource/technical/document/programming_manual/6c/3a/cb/e7/e4/ea/44/9b/DM00046982.pdf/files/DM00046982.pdf/jcr:content/translations/en.DM00046982.pdf) |
+| Board Manual   | [Board Manual](https://www.st.com/resource/en/user_manual/um1879-discovery-kit-with-stm32l476vg-mcu-stmicroelectronics.pdf) |
+
+## Flashing the Board Using ST-LINK Removable Media
+
+On-board ST-LINK programmer provides via composite USB device removable media.
+Copying the HEX file causes reprogramming of the board. This task
+could be performed manually; however, the cpy2remed (copy to removable
+media) PROGRAMMER script does this automatically. To program board in
+this manner, use the command:
+```
+make BOARD=stm32l476g-disco PROGRAMMER=cpy2remed flash
+```
+@note This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates
+      can be found on [this STM webpage](https://www.st.com/en/development-tools/stsw-link007.html).
+
+## Accessing RIOT shell
+
+Default RIOT shell access utilize VCP (Virtual COM Port) via USB interface,
+provided by integrated ST-LINK programmer. ST-LINK is connected to the
+microcontroller USART2.
+
+The default baud rate is 115200.
+
+ */

boards/stm32l476g-disco/include/board.h

@@ -7,8 +7,7 @@
  */
 
 /**
- * @defgroup    boards_stm32l476g-disco STM32L476G-DISCO
- * @ingroup     boards
+ * @ingroup    boards_stm32l476g-disco
  * @brief       Support for the STM32L476G-DISCO board
  * @{
  *