Improvements and fixes for Creality K2 Plus (#8154)

SoftFever · Jan 23, 2025 · ddef92c · ddef92c
1 parent 85e9d32
commit ddef92c
Show file tree

Hide file tree

Showing 30 changed files with 77 additions and 19 deletions.
diff --git a/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json b/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json
@@ -17,6 +17,7 @@
     "slow_down_min_speed": [
         "20"
     ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
     "compatible_printers": [
         "Creality K2 Plus 0.2 nozzle",
         "Creality K2 Plus 0.4 nozzle",

diff --git a/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json b/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json
@@ -17,6 +17,7 @@
     "slow_down_min_speed": [
         "20"
     ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
     "compatible_printers": [
         "Creality K2 Plus 0.2 nozzle",
         "Creality K2 Plus 0.4 nozzle",

diff --git a/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json
@@ -14,6 +14,7 @@
     "fan_min_speed": [
         "30"
     ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
     "compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",
         "Creality K2 Plus 0.4 nozzle",

diff --git a/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json
@@ -50,6 +50,7 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
     "compatible_printers": [
         "Creality K2 Plus 0.2 nozzle",
         "Creality K2 Plus 0.4 nozzle",

diff --git a/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json
@@ -44,6 +44,7 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
     "compatible_printers": [
         "Creality K2 Plus 0.2 nozzle",
         "Creality K2 Plus 0.4 nozzle",

diff --git a/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json b/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json
@@ -32,6 +32,7 @@
     "reduce_fan_stop_start_freq": [
         "1"
     ],
+	"filament_start_gcode": ["; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"],
     "compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",
         "Creality K2 Plus 0.4 nozzle",

diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json
@@ -20,9 +20,10 @@
     ],
     "printable_height": "350",
     "nozzle_type": "hardened_steel",
+    "nozzle_volume": "183",
     "auxiliary_fan": "1",
     "support_air_filtration": "1",
-    "support_multi_bed_types": "0",
+    "support_multi_bed_types": "1",
     "machine_max_acceleration_e": [
         "5000",
         "5000"
@@ -91,7 +92,7 @@
     ],
     "printer_settings_id": "Creality",
     "retraction_minimum_travel": [
-        "2"
+        "1"
     ],
     "retract_before_wipe": [
         "70%"
@@ -108,7 +109,14 @@
     "deretraction_speed": [
         "40"
     ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "349"
+    ],
     "enable_filament_ramming": "0",
+    "purge_in_prime_tower": "0",
     "cooling_tube_length": "0",
     "cooling_tube_retraction": "0",
     "parking_pos_retraction": "0",
@@ -127,12 +135,12 @@
     "default_filament_profile": [
         "Creality Generic PLA @K2-all"
     ],
-    "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
     "machine_end_gcode": "END_PRINT",
     "machine_pause_gcode": "PAUSE",
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "scan_first_layer": "0",
-    "thumbnails_format":"PNG",
+    "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
         "96x96"

diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json
@@ -20,9 +20,10 @@
     ],
     "printable_height": "350",
     "nozzle_type": "hardened_steel",
+    "nozzle_volume": "183",
     "auxiliary_fan": "1",
     "support_air_filtration": "1",
-    "support_multi_bed_types": "0",
+    "support_multi_bed_types": "1",
     "machine_max_acceleration_e": [
         "5000",
         "5000"
@@ -91,13 +92,13 @@
     ],
     "printer_settings_id": "Creality",
     "retraction_minimum_travel": [
-        "2"
+        "1"
     ],
     "retract_before_wipe": [
         "70%"
     ],
     "retraction_length": [
-        "0.5"
+        "0.8"
     ],
     "retract_length_toolchange": [
         "0"
@@ -108,7 +109,14 @@
     "deretraction_speed": [
         "40"
     ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "349"
+    ],
     "enable_filament_ramming": "0",
+    "purge_in_prime_tower": "0",
     "cooling_tube_length": "0",
     "cooling_tube_retraction": "0",
     "parking_pos_retraction": "0",
@@ -120,19 +128,19 @@
         "0.4"
     ],
     "wipe_distance": [
-        "1"
+        "2"
     ],
     "single_extruder_multi_material": "1",
     "manual_filament_change": "0",
     "default_filament_profile": [
         "Creality Generic PLA @K2-all"
     ],
-    "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
     "machine_end_gcode": "END_PRINT",
     "machine_pause_gcode": "PAUSE",
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "scan_first_layer": "0",
-    "thumbnails_format":"PNG",
+    "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
         "96x96"

diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json
@@ -20,9 +20,10 @@
     ],
     "printable_height": "350",
     "nozzle_type": "hardened_steel",
+    "nozzle_volume": "183",
     "auxiliary_fan": "1",
     "support_air_filtration": "1",
-    "support_multi_bed_types": "0",
+    "support_multi_bed_types": "1",
     "machine_max_acceleration_e": [
         "5000",
         "5000"
@@ -91,7 +92,7 @@
     ],
     "printer_settings_id": "Creality",
     "retraction_minimum_travel": [
-        "2"
+        "1"
     ],
     "retract_before_wipe": [
         "70%"
@@ -108,7 +109,14 @@
     "deretraction_speed": [
         "40"
     ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "349"
+    ],
     "enable_filament_ramming": "0",
+    "purge_in_prime_tower": "0",
     "cooling_tube_length": "0",
     "cooling_tube_retraction": "0",
     "parking_pos_retraction": "0",
@@ -127,7 +135,7 @@
     "default_filament_profile": [
         "Creality Generic PLA @K2-all"
     ],
-    "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
     "machine_end_gcode": "END_PRINT",
     "machine_pause_gcode": "PAUSE",
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
@@ -137,4 +145,4 @@
         "300x300",
         "96x96"
     ]
-}
+}
diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json
@@ -20,9 +20,10 @@
     ],
     "printable_height": "350",
     "nozzle_type": "hardened_steel",
+    "nozzle_volume": "183",
     "auxiliary_fan": "1",
     "support_air_filtration": "1",
-    "support_multi_bed_types": "0",
+    "support_multi_bed_types": "1",
     "machine_max_acceleration_e": [
         "5000",
         "5000"
@@ -91,7 +92,7 @@
     ],
     "printer_settings_id": "Creality",
     "retraction_minimum_travel": [
-        "2"
+        "1"
     ],
     "retract_before_wipe": [
         "70%"
@@ -108,7 +109,14 @@
     "deretraction_speed": [
         "40"
     ],
+    "retract_lift_above": [
+        "0"
+    ],
+    "retract_lift_below": [
+        "349"
+    ],
     "enable_filament_ramming": "0",
+    "purge_in_prime_tower": "0",
     "cooling_tube_length": "0",
     "cooling_tube_retraction": "0",
     "parking_pos_retraction": "0",
@@ -127,14 +135,14 @@
     "default_filament_profile": [
         "Creality Generic PLA @K2-all"
     ],
-    "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600",
+    "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
     "machine_end_gcode": "END_PRINT",
     "machine_pause_gcode": "PAUSE",
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "scan_first_layer": "0",
-    "thumbnails_format":"PNG",
+    "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
         "96x96"
     ]
-}
+}
diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.25",
     "inner_wall_speed": "150",
     "wall_loops": "4",

diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.45",
     "inner_wall_speed": "350",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.25",
     "inner_wall_speed": "150",
     "wall_loops": "4",

diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.25",
     "inner_wall_speed": "150",
     "wall_loops": "4",

diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.45",
     "inner_wall_speed": "300",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.25",
     "inner_wall_speed": "150",
     "wall_loops": "4",

diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.45",
     "inner_wall_speed": "300",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "20",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.65",
     "inner_wall_speed": "150",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.45",
     "inner_wall_speed": "300",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "20",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.82",
     "inner_wall_speed": "150",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.45",
     "inner_wall_speed": "300",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "20",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.65",
     "inner_wall_speed": "150",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "30",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.45",
     "inner_wall_speed": "200",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "20",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.65",
     "inner_wall_speed": "150",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "20",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.82",
     "inner_wall_speed": "150",
     "wall_loops": "2",

diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json
@@ -54,6 +54,7 @@
     "overhang_3_4_speed": "20",
     "overhang_4_4_speed": "10",
     "only_one_wall_top": "1",
+    "precise_outer_wall": "1",
     "inner_wall_line_width": "0.65",
     "inner_wall_speed": "150",
     "wall_loops": "2",