ramcek proti vode

CAD/src/888_1023.scad

@@ -0,0 +1,53 @@
+//Spodni cast pylonu
+include <../parameters.scad>
+use <lib/stdlib/silentblock.scad>
+
+pylon_bottom_wall = 5;
+
+//
+//  TODO! Tyto parametry pochazi z 888_1023, nacitat je odtud
+
+gps = 1;            // Vytvorit prostor pro GPS pod pylonem
+gps_rtk = 0;        // 1 nebo 0 - pocet odkrytych LEDek
+gps_pcb_width = 51;
+gps_screw_dist = 40;
+
+gps_conn_height = 6;
+gps_pcb_height = 1.6;
+gps_patch_height = 4.5;
+
+rantl = 0.5;
+rantl_height = 2;
+screw_column = 4.3;
+
+module 888_1023(){
+
+    box_height = 0.8+gps_conn_height+gps_pcb_height+gps_patch_height;
+    box_width = gps_pcb_width+0.5+2;
+
+    difference(){
+        union(){
+            translate([0, 0, rantl_height/2])
+                cube([box_width+rantl*2+0.5, box_width+rantl*2+0.5, rantl_height], center=true);
+        }
+
+        translate([0, 0, box_height/2+0.4])
+            cube([box_width+rantl*2, box_width+rantl*2, box_height], center=true);
+        translate([0, 0, box_height/2-0.1])
+            cube([36, 46, box_height], center=true);
+
+    for(x=[0.5, -0.5], y=[0.5, -0.5])translate([40*x, 40*y, 0]) difference(){
+     //       cylinder(d=7, h=screw_column, $fn=30);
+            cylinder(d=2.5, h=screw_column+0.1, $fn=30);
+    }
+    }
+
+    for(x=[0.5, -0.5], y=[0.5, -0.5])translate([40*x, 40*y, 0]) difference(){
+            cylinder(d=5, h=screw_column+0.4, $fn=30);
+            cylinder(d=2.5, h=screw_column+0.4+0.1, $fn=30);
+    }
+}
+
+
+
+888_1023();

CAD/src/printplate/printplate_888_1023.scad

@@ -0,0 +1,7 @@
+//@set_slicing_config(../../slicing/default.ini)
+
+//autopilot and tail tube mount
+include <../../parameters.scad>
+use <../888_1023.scad>
+
+888_1023();