🌟LilyGO T-Wristband and T-Glass🌟

News

• T-Glass has two versions, the initial preview version and T-GlassV2 version (modified prism reflection method). The difference between the two is only the display method, the hardware is the same
• T-Wristband and T-Glass have the same hardware, but the viewing area is different due to the casing.
• LilyGO T-Wristband and T-Glass depends on lvgl v8.4.x version. Currently lvgl has released lvgl v9.0 version. When compilation error occurs, please check whether lvgl belongs to v8.4.x
• The visual size of T-Wristband and T-Glass is different from the actual screen size. All examples are based on the lvgl graphics framework. Other image frameworks such as TFT_eSPI are not available here.

1️⃣Support Product

Product(PinMap)	SOC	Flash	PSRAM	Resolution	Visible Area
T-Glass/V2	ESP32-S3 FN4R2	4MB	2MB(QSPI)	294x126	126x126
T-Wristband	ESP32-S3 FN4R2	4MB	2MB(QSPI)	294x126	126x250

Current consumption	Working current	sleep current	sleep mode
T-Glass/V2	(240MHz) WiFi On 90~230+ mA	about 300uA	touch button wakeup
T-Wristband	(240MHz) WiFi On 90~230+ mA	about 300uA	touch button wakeup

2️⃣Examples

./examples/
├── Glass                  # Initial version
│   ├── Glass6DoF 
│   ├── GlassBatteryVoltage
│   ├── GlassDeepSleep
│   ├── GlassDisplayRotation
│   ├── GlassFactory
│   │   └── src
│   ├── GlassHelloWorld
│   ├── GlassRtcAlarm
│   ├── GlassRtcDateTime
│   ├── GlassTouchButton
│   ├── GlassTouchButtonEvent
│   └── GlassVoiceActivityDetection
├── GlassV2                # Modify the reflective prism version         
│   ├── Glass6DoF
│   ├── GlassBatteryVoltage
│   ├── GlassDeepSleep
│   ├── GlassFactory
│   │   └── src
│   ├── GlassHelloWorld
│   ├── GlassRtcAlarm
│   ├── GlassRtcDateTime
│   ├── GlassTouchButton
│   ├── GlassTouchButtonEvent
│   └── GlassVoiceActivityDetection
└── Wristband
    ├── Wristband6DoF
    ├── WristbandBatteryVoltage
    ├── WristbandDeepSleep
    ├── WristbandDisplayRotation
    ├── WristbandDisplayVisualWindow1
    ├── WristbandFactory
    │   └── src
    ├── WristbandHelloWorld
    ├── WristbandLightSleep
    ├── WristbandRtcAlarm
    ├── WristbandRtcDateTime
    ├── WristbandTouchButton
    └── WristbandTouchButtonEvent

3️⃣ PlatformIO Quick Start (Recommended)

1. Install Visual Studio Code and Python
2. Search for the PlatformIO plugin in the VisualStudioCode extension and install it.
3. After the installation is complete, you need to restart VisualStudioCode
4. After restarting VisualStudioCode, select File in the upper left corner of VisualStudioCode -> Open Folder -> select the LilyGO T-Wristband and T-Glass directory
5. Wait for the installation of third-party dependent libraries to complete
6. Click on the platformio.ini file, and in the platformio column
7. Uncomment one of the lines src_dir = xxxx to make sure only one line works
8. Click the (✔) symbol in the lower left corner to compile
9. Connect the board to the computer USB
10. Click (→) to upload firmware
11. Click (plug symbol) to monitor serial output
12. If it cannot be written, or the USB device keeps flashing, please check the FAQ below

4️⃣ Install from Arduino Library Manager (recommended)

1. Install Arduino IDE

2. Install Arduino ESP32 V 2.0.5 or above and below V3.0, Library based on the Stable version, Please make sure the link in Boards Manager is

   https://espressif.github.io/arduino-esp32/package_esp32_index.json
   

3. Sketch -> Include Library -> Manage Libraries

4. Library Search -> LilyGO T-Wristband and T-Glass -> Install -> Install ALL

5. Library Search -> lvgl -> v8.4.0 -> Install

6. Library Search -> SensorLib -> v0.1.8 -> Install

7. File -> Examples -> LilyGO T-Wristband and T-Glass -> Select the corresponding example

8. Tools -> , Make your selection according to the table below

   Arduino IDE Setting	Value
   Board	ESP32S3 Dev Module
   Port	Your port
   USB CDC On Boot	Enable
   CPU Frequency	240MHZ(WiFi)
   Core Debug Level	None
   USB DFU On Boot	Disable
   Erase All Flash Before Sketch Upload	Disable
   Events Run On	Core1
   Flash Mode	QIO 80MHZ
   Flash Size	4MB(32Mb)
   Arduino Runs On	Core1
   USB Firmware MSC On Boot	Disable
   Partition Scheme	Default 4M with spiffs(1.2M APP/1.5MB SPIFFS)
   PSRAM	QSPI PSRAM
   Upload Mode	UART0/Hardware CDC
   Upload Speed	921600
   USB Mode	CDC and JTAG

   • The options in bold are required, others are selected according to actual conditions.

9. Select Port

10. Click upload , Wait for compilation and writing to complete

11. If it cannot be written, or the USB device keeps flashing, please check the FAQ below

5️⃣ Arduino IDE Manual installation (not recommended)

1. Install Arduino IDE

2. Install Arduino ESP32 V 2.0.5 or above and below V3.0, Library based on the Stable version, Please make sure the link in Boards Manager is

   https://espressif.github.io/arduino-esp32/package_esp32_index.json

3. Download LilyGO T-Wristband and T-Glass , move to Arduino library folder (e.g. C:\Users\YourName\Documents\Arduino\libraries)

4. Copy all folders in libdeps folder to Arduino library folder (e.g. C:\Users\YourName\Documents\Arduino\libraries)

5. Tools -> , Make your selection according to the table below

   Arduino IDE Setting	Value
   Board	ESP32S3 Dev Module
   Port	Your port
   USB CDC On Boot	Enable
   CPU Frequency	240MHZ(WiFi)
   Core Debug Level	None
   USB DFU On Boot	Disable
   Erase All Flash Before Sketch Upload	Disable
   Events Run On	Core1
   Flash Mode	QIO 80MHZ
   Flash Size	4MB(32Mb)
   Arduino Runs On	Core1
   USB Firmware MSC On Boot	Disable
   Partition Scheme	Default 4M with spiffs(1.2M APP/1.5MB SPIFFS)
   PSRAM	QSPI PSRAM
   Upload Mode	UART0/Hardware CDC
   Upload Speed	921600
   USB Mode	CDC and JTAG

   • The options in bold are required, others are selected according to actual conditions.

6. File -> Examples -> LilyGO T-Wristband and T-Glass -> Select the corresponding example

7. Select Port

8. Click upload , Wait for compilation and writing to complete

9. If it cannot be written, or the USB device keeps flashing, please check the FAQ below

6️⃣ ESP32 basic examples

• BLE Examples
• WiFi Examples
• SPIFFS Examples
• FFat Examples
• For more examples of esp32 chip functions, please refer to arduino-esp32-libraries

7️⃣ FAQ

1. The board uses USB as the JTAG upload port. When printing serial port information on USB_CDC_ON_BOOT configuration needs to be turned on. If the port cannot be found when uploading the program or the USB has been used for other functions, the port does not appear. Please enter the upload mode manually.

   1. Connect the board via the USB cable
   2. Press and hold the BOOT button , While still pressing the BOOT button, press RST button
   3. Release the RST button
   4. Release the BOOT button
   5. Upload sketch

2. If the above is invalid, burn the binary file to check whether the hardware is normal

3. If you use external power supply instead of USB-C, please turn off the USB_CDC_ON_BOOT option. This is because the board will wait for USB access when it starts.

   • For Arduino IDE users, it can be turned off in the options , Please note that turning off USB_CDC_ON_BOOT will turn off Serial redirection to USB-C. At this time, you will not see any Serial message output when opening the port from USB-C, but output from GPIO43 and GPIO44.

   Tools -> USB CDC On Boot -> Disable

   • For Platformio users, you can add the following compilation flags in the ini file

   build_flags =
       ; Enable -DARDUINO_USB_CDC_ON_BOOT will start printing and wait for terminal access during startup
       ; -DARDUINO_USB_CDC_ON_BOOT=1
   
       ; Enable -UARDUINO_USB_CDC_ON_BOOT will turn off printing and will not block when using the battery
       -UARDUINO_USB_CDC_ON_BOOT

4. The JD9613 display RAM is only 1/2 the screen size and does not support rotation.Directions 0 and 1 can adjust the vertical direction, horizontal 1 and 3 are the same direction.

   // Set the screen orientation to portrait , 0 and 2 are two opposite vertical directions
    amoled.setRotation(0);
    amoled.setRotation(2);
   
   // Set the screen orientation to horizontal. 1 and 3 are all in the same direction and cannot be changed.
    amoled.setRotation(1);
    amoled.setRotation(3);

8️⃣ Resource

Product(PinMap)	schematic
T-Glass	schematic
T-Wristband	schematic

T-Glass & T-Wristband datasheet

• JD9613 Driver
• ESP32S3-FN4R2
• BHI260AP
• PCF85063A

8️⃣ Depends on required libraries

• SensorLib 0.1.8
• lvgl 8.4.0
• MadgwickAHRS