Merge pull request #257 from yrabbit/bandgap-z1

Implement power saving primitive BANDGAP

apycula/chipdb.py

@@ -1574,6 +1574,13 @@ def fse_create_gsr(dev, device):
     dev.extra_func.setdefault((row, col), {}).update(
         {'gsr': {'wire': 'C4'}})
 
+def fse_create_bandgap(dev, device):
+    # The cell and wire are found by a test compilation where the BGEN input is
+    # connected to a button - such wires are easily traced in a binary image.
+    if device in {'GW1NZ-1'}:
+        dev.extra_func.setdefault((10, 18), {}).update(
+            {'bandgap': {'wire': 'C1'}})
+
 def fse_bram(fse, aux = False):
     bels = {}
     name = 'BSRAM'
@@ -1658,6 +1665,8 @@ def set_chip_flags(dev, device):
         dev.chip_flags.append("NEED_BSRAM_OUTREG_FIX")
     if device in {'GW1N-1', 'GW1NZ-1', 'GW1NS-2', 'GW1N-4', 'GW1NS-4', 'GW1N-9', 'GW1N-9C', 'GW2A-18', 'GW2A-18C'}:
         dev.chip_flags.append("NEED_BLKSEL_FIX")
+    if device in {'GW1NZ-1'}:
+        dev.chip_flags.append("HAS_BANDGAP")
 
 def from_fse(device, fse, dat: Datfile):
     dev = Device()
@@ -1711,6 +1720,7 @@ def from_fse(device, fse, dat: Datfile):
     fse_create_io16(dev, device)
     fse_create_osc(dev, device, fse)
     fse_create_gsr(dev, device)
+    fse_create_bandgap(dev, device)
     fse_create_logic2clk(dev, device, dat)
     disable_plls(dev, device)
     sync_extra_func(dev)

apycula/gowin_pack.py

@@ -185,7 +185,7 @@ def get_bits(init_data):
 def get_bels(data):
     later = []
     if is_himbaechel:
-        belre = re.compile(r"X(\d+)Y(\d+)/(?:GSR|LUT|DFF|IOB|MUX|ALU|ODDR|OSC[ZFHWO]?|BUF[GS]|RAM16SDP4|RAM16SDP2|RAM16SDP1|PLL|IOLOGIC|BSRAM|ALU|MULTALU18X18|MULTALU36X18|MULTADDALU18X18|MULT36X36|MULT18X18|MULT9X9|PADD18|PADD9)(\w*)")
+        belre = re.compile(r"X(\d+)Y(\d+)/(?:GSR|LUT|DFF|IOB|MUX|ALU|ODDR|OSC[ZFHWO]?|BUF[GS]|RAM16SDP4|RAM16SDP2|RAM16SDP1|PLL|IOLOGIC|BSRAM|ALU|MULTALU18X18|MULTALU36X18|MULTADDALU18X18|MULT36X36|MULT18X18|MULT9X9|PADD18|PADD9|BANDGAP)(\w*)")
     else:
         belre = re.compile(r"R(\d+)C(\d+)_(?:GSR|SLICE|IOB|MUX2_LUT5|MUX2_LUT6|MUX2_LUT7|MUX2_LUT8|ODDR|OSC[ZFHWO]?|BUFS|RAMW|rPLL|PLLVR|IOLOGIC)(\w*)")
 
@@ -2242,6 +2242,8 @@ def place(db, tilemap, bels, cst, args):
 
         if typ == "GSR":
             pass
+        elif typ == "BANDGAP":
+            pass
         elif typ.startswith('MUX2_'):
             pass
         elif typ == "BUFS":
@@ -2260,6 +2262,7 @@ def place(db, tilemap, bels, cst, args):
                 en_tiledata = db.grid[db.rows - 1][db.cols - 1]
                 en_tile = tilemap[(db.rows - 1, db.cols - 1)]
                 en_tile[23][63] = 0
+                en_tile[22][63] = 1
             # clear powersave fuses
             clear_attrs = set()
             add_attr_val(db, 'OSC', clear_attrs, attrids.osc_attrids['POWER_SAVE'], attrids.osc_attrvals['ENABLE'])

examples/himbaechel/bandgap.v

@@ -0,0 +1,49 @@
+module top (
+	input key_i,
+	output [`LEDS_NR-1:0] led
+);
+
+wire clk;
+
+`ifdef OSC_TYPE_OSC
+OSC osc(
+	.OSCOUT(clk)
+);
+`elsif OSC_TYPE_OSCZ
+OSCZ osc(
+	.OSCEN(1'b1),
+	.OSCOUT(clk)
+);
+`elsif OSC_TYPE_OSCF
+OSCF osc(
+	.OSCEN(1'b1),
+	.OSCOUT(clk),
+	.OSCOUT30M()
+);
+`elsif OSC_TYPE_OSCH
+OSCH osc(
+	.OSCOUT(clk)
+);
+`endif
+defparam osc.FREQ_DIV=16;
+
+wire key = key_i ^ `INV_BTN;
+
+reg [25:0] ctr_q;
+wire [25:0] ctr_d;
+
+// Sequential code (flip-flop)
+always @(posedge clk) begin
+	ctr_q <= ctr_d;
+end
+
+BANDGAP bandgap(
+	.BGEN(key)
+);
+
+
+// Combinational code (boolean logic)
+assign ctr_d = ctr_q + 1'b1;
+assign led = {ctr_q[25:25-(`LEDS_NR - 2)], |ctr_q[25-(`LEDS_NR - 1):25-(`LEDS_NR)] };
+
+endmodule