Acceldata Admon

Monitors the locally running docker containers and the basic system resources.

---

Compile the admon binary for Linux

env CGO_ENABLED=0 GOOS=linux GOARCH=amd64 go build -mod=vendor -a -installsuffix cgo -ldflags='-w -s' -o admon

---

Usage

1. Run the binary once to generate the config file

   ./admon

   Expected output:

   INFO: Config file initiated successfully!
   INFO: Edit the config file at './admon.yml'

2. Edit the config file ./admon.yml and customise the options

   • Properties in the configuration file that may need to be updated

     PULSE_SERVER_HOSTNAME/IP
     
     containers - Validate if the list of containers are what we want to monitor in the Pulse server machine.
     
     SMTP_SERVER_USERNAME
     
     SMTP_SERVER_PASSWORD
     
     SMTP_SERVER_HOST/IP
     
     SMTP_SERVER_PORT
     
     SENDER_EMAIL_ADDRESS
     
     SENDER_NAME
     
     RECEIVER_EMAIL_ADDRESS_1
     
     RECEIVER_EMAIL_ADDRESS_2
     
     CONTAINER_MONITORING_CHECK_INTERVAL_IN_SECONDS  - default value: 60
     
     CONTAINER_MONITORING_SNOOZE_TIME_IN_SECONDS  - default value: 360
     
     DISK_THRESHOLD_PERCENTAGE  - default value: 0 (disabled)
     
     DISK_MONITORING_CHECK_INTERVAL_IN_SECONDS   - default value: 60
     
     DISK_MONITORING_SNOOZE_TIME_IN_SECONDS   - default value: 360
     
     

   • Example Scenarios for email alerts:

     • Check if any containers are not running every 60 seconds interval, in-case any container is down send an alert email and do not resend (snooze) the alert for the next 6 minutes unless any new containers failed.

       • set CONTAINER_MONITORING_CHECK_INTERVAL_IN_SECONDS to 60 .
       • set CONTAINER_MONITORING_SNOOZE_TIME_IN_SECONDS to 360 .
       • Example YAML configuration block:

       CheckInterval: 60
       SnoozeTime: 360

     • Check if the disk usage has gone beyond or equal to 80% for the mount point / every 60 seconds interval and send an email alert in-case of reaching the threshold percentage and do not resend (snooze) the alert for the next 6 minutes.

       • set DISK_THRESHOLD_PERCENTAGE for the mount-point / to 80 .
       • set DISK_MONITORING_CHECK_INTERVAL_IN_SECONDS to 60 .
       • set DISK_MONITORING_SNOOZE_TIME_IN_SECONDS to 360 .
       • Example YAML configuration block:

       sysConfig:
       diskThreshold:
           /: 80
       checkInterval: 60
       SnoozeTime: 360

   • You can see all mount-points available in a system using the following command

   $ df -h
   
   Filesystem      Size  Used Avail Use% Mounted on
   dev             7.8G     0  7.8G   0% /dev
   run             7.8G  1.7M  7.8G   1% /run
   /dev/nvme0n1p1  246G  132G  104G  50% /
   tmpfs           7.8G  232M  7.6G   3% /dev/shm
   tmpfs           7.8G   60M  7.7G   1% /tmp
   /dev/nvme0n1p3  500M  280K  499M   1% /boot/efi
   tmpfs           1.6G  108K  1.6G   1% /run/user/1000

3. Run the admon binary with the flag -r

   ./admon -r

   Expected output:

   INFO: Looking for containers in "all" network ...
   INFO: Initialised System Metric Checker ..
   INFO: Everything Looks Good!

4. If any of the container goes down admon will print the below in the stdout and tries to send an email using the SMTP configuraion from the config file

   INFO: Looking for containers in "all" network ...
   ERROR: Cannot get running containers. Because:  No existing containers found
   INFO: Taking it as, all the containers are missing ...
   INFO: Missing Containers:  [webserver_1]
   INFO: Trying to send the email ...

---

Creating a systemd service for admon

• Create a new file at the path /etc/systemd/system/admon.service with the below contents:

  • Replace </PATH/TO> and <CONFIG_DIR> appropriate values

    [Unit]
    Description=AccelData AdMon Daemon
    Wants=syslog.target network.target
    After=syslog.target network.target
    [Service]
    Type=simple
    PIDFile=/run/admon.pid
    ExecStartPre=/usr/bin/test -f /usr/bin/docker
    ExecStart=</PATH/TO>/admon -r -c <CONFIG_DIR>
    ExecStop=/bin/kill -9 $MAINPID
    TimeoutStopSec=10
    Restart=always
    RestartSec=10
    [Install]

• Run below commands to start & enable admon as a systemd service:

  sudo systemctl daemon-reload
  sudo systemctl start admon
  sudo systemctl status admon

• Enable the admon systemd service so that it will start automatically whenever the system reboots

  sudo systemctl enable admon

---

Troubleshooting

• If the user running the admon binary/service doesn't have the required system permissions you'll see the errors like

  ERROR: Cannot fetch disk usage for the path '/run/user/1000/doc'. Because: operation not permitted
  ERROR: Cannot fetch disk usage for the path '/var/lib/docker/overlay2/e0b75929a687e684ad36cd16b018a78b5843deb47257bef96648958fdaac4112/merged'. Because: permission denied
  ERROR: Cannot fetch disk usage for the path '/run/docker/netns/edaa4cf324e6'. Because: permission denied

• If no docker containers were running in your machine you'll see the below error

  ERROR:  No existing containers found

• If the SMTP server configured is not working you'll see the below error

  ERROR: Failed while dialing for alert mail ..
  ERROR: dial tcp: lookup smtp-us-email.server.net on 127.0.0.53:53: no such host

---