Skip to content

A simple 18650 Lithium Ion battery tester based on a raspberry pi, with the hardware schematics and python program and GUI.

License

Notifications You must be signed in to change notification settings

amoeez/18650_tester_software

 
 

Repository files navigation

Coverage Status

Raspberry -based, 4-slots 18650 battery tester

This is an open source lithium-ion 18650 cells tester that discharges 4 batteries into 4 resistors, regularly records the current flowing, and deduces the total capacity of the cell.

It is quit handy if you have old laptop batteries that you want to test in order to create your own battery packs for a very cheap price.

Just put the charged cell in a slot, and the test starts automatically if the cell is charged. You can then follow the test on real-time curves.

At the end of the test, a csv file is created with the recorded voltages and capacity.

When one cell is tested, you can replace it independently of the others.

Testing batteries

The advantages of this projects versus a commercial tester like the iMax B6 are:

  • all slots are totally independent
  • you can see the precise behaviour of the cell
  • you can calculate your own metrics on each cell
  • you can easily create statistics on the tested cells from the saved csv files
  • you can extend it to manage more cells

From a programmer point of view, the project contains those following interesting points:

  • how to mock a Raspberry with an SPI device (here an MCP3008 ADC) in order to easily create unit tests
  • how to create unit tests for a Tkinter GUI

Planned improvements:

  • use a constant discharge current
  • record the initial voltage drop when the battery is put under load
  • add an estimated remaining time during test

Construction

List of material

  • 1x raspberry pi
  • 1x 4-channel 5V relay
  • 4x 4Ohm 5W resistors
  • 1x MCP3008 Analog numeric converter
  • 1x 4 slots battery holder
  • 1x USB wifi dongle (optional)

Wiring

tester schematics

Example of construction

Set up your Raspberry

Configure I2C

Install the required libraries

sudo pip3 install --upgrade setuptools
sudo apt-get install -y python-smbus
sudo apt-get install -y python3-tk
sudo apt-get install -y i2c-tools

Enable I2C

sudo raspi-config

In the menus, go to Interfacing options, then I2C and choose YES

Then, run

sudo reboot
sudo i2cdetect -y 1

Configure SPI

Configure SPI with the following commands:

sudo raspi-config
Interfacing options / SPI / YES
sudo reboot
ls -l /dev/spidev*

Install additional libraries

pip3 install -f requirements.txt

Run the program

Start the GUI that manages the testing of the batteries

python3 battery_tester/tkinter_app.py

Use it

  • First, charge your cells, for example with TP4056 cards.
  • Start the raspberry and run the program
  • Put the cells in the slots
  • Once the test of a cell is finished, replace it with a new cell (wait for 10s before putting the new one)

Contributing

Create a virtual environment:

pipenv install - requirement_dev.txt

Then

pipenv shell

Then, to run the tests, run the command pytest

About

A simple 18650 Lithium Ion battery tester based on a raspberry pi, with the hardware schematics and python program and GUI.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 100.0%