RFM69

RFM69 C library port attempt from this arduino library: https://github.com/LowPowerLab/RFM69 Supports RFM69W, RFM69HW, RFM69CW, RFM69HCW (semtech SX1231, SX1231H)

How to use this library

Configure pins

• MOSI/CLK - output
• MISO - input
• NSS - output
• RESET/DIO1 - input

External interrupt line

DIO1 line configure as external interrupt line on rising edge and use RFM69_interruptHandler() as callback.

SPI module

• set SPI CPOL= 0 and CPHA = 0, MSB first
• maximum 10MHz SCK clock according to RFM69 datasheet

Please define in your project these platform specific functions defined as extern in RFM69.h:

• extern void noInterrupts(); function to disable interrupts
• extern void interrupts(); function to enable interrupts
• extern void RFM69_SetCSPin(bool); function to control the GPIO connected to RFM69 chip select (HIGH or LOW)
• extern bool RFM69_ReadDIO0Pin(void); function to read GPIO connected to RFM69 DIO0 (RFM69 interrupt signalling)
• extern uint8_t SPI_transfer8(uint8_t); function to transfer 1byte on SPI with readback
• extern bool RFM69_IsTimeout(void); function for timeout handling, checks if previously set timeout expired
• extern void RFM69_SetTimeout(uint16_t); function for timeout handling, sets a timeout, parameter is in milliseconds (ms)