Delay of 60 ms in USOWR command sequence #88
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
From the UBlox AT Commands example App note:
Request to write 100 data bytes into socket #0. Wait for "@" symbol indicating the data prompt is now open (AT commands are not allowed in data prompt).
After the @ prompt reception, wait for a minimum of 50 ms before sending data.
At the moment, there is no wait in the lib. I added a patch that sends the USOWR command and then wait blindly for 60 ms. I experienced troubles while waiting for the '@' prompt, so i just added a stupid delay(60) to fullfill the specs better than now. It's just a patch that can be certainly done better...