Merge branch 'arendst:development' into feature/Support_S88

.github/PULL_REQUEST_TEMPLATE.md

@@ -7,7 +7,7 @@
   - [ ] Only relevant files were touched
   - [ ] Only one feature/fix was added per PR and the code change compiles without warnings
   - [ ] The code change is tested and works with Tasmota core ESP8266 V.2.7.8
-  - [ ] The code change is tested and works with Tasmota core ESP32 V.3.1.0.241030
+  - [ ] The code change is tested and works with Tasmota core ESP32 V.3.1.0.241206
   - [ ] I accept the [CLA](https://github.com/arendst/Tasmota/blob/development/CONTRIBUTING.md#contributor-license-agreement-cla).
 
 _NOTE: The code change must pass CI tests. **Your PR cannot be merged unless tests pass**_

CHANGELOG.md

@@ -3,26 +3,119 @@ All notable changes to this project will be documented in this file.
 
 ## [Unreleased] - Development
 
-## [14.3.0.6] 
+## [14.4.1.1] 
+### Added
+- Command ``SetOption163 1`` to disable display of Device name in GUI header
+- Berry `animate.crenel` primitive (#22673)
+- Berry scroll to Leds_matrix (#22693)
+- HASPmota support for `tabview` (#22707)
+- Berry bit-shift operators to `int64` (#22709)
+- Berry add unicode encoding to string parsing (#22713)
+- Berry `tasmota.int(v, min, max)` function (#22723)
+- Berry driver for M5Stack 8encoder (#22724)
+- Support for PCF85063 RTC (#22727)
+
+### Breaking Changed
+
+### Changed
+- ESP32 disable PSRAM check (and on restart some relay toggles) with `#define DISABLE_PSRAMCHECK true` (#21266)
+- TLS disable ECDSA for MQTT to ensure we don't break fingerprints after #22649
+- GPIOViewer from v1.5.6 to v1.5.8
+- HASPmota use 'roboto.ttf' for automatic sizing of default font (#22697)
+- HASPmota add 'tag' attribute for free-form JSON (#22698)
+- Postpone save_data during light animation when fade is Off
+
+### Fixed
+- Berry Zigbee fix wrong attributes (#22684)
+- Berry walrus operator (#22685)
+- Webcam compilation with `define USE_WEBCAM` but without `define ENABLE_RTSPSERVER` (#22686)
+- LVGL updated `Antiburn.tapp` (#22699)
+- Matter Air Quality sensor (#22708)
+
+### Removed
+
+
+## [Released]
+
+## [14.4.1] 20241215
+- Release Rudolph
+
+## [14.4.0.1] 20241215
 ### Added
-- Add command ``WebColor20`` to control color of Button when Off
+- MCP23XXX_DRV control register IOCON in template (#22622)
+- ESP32 support for TLS ECDSA (#22649)
+
+### Changed
+- Berry make Leds animate calls reentrant (#22643)
+- SSL clean up remnants of old fingerprint algorithm (#22645)
+- Display removed PWM control of backlight GPIO regression from v14.1.0
+
+### Fixed
+- ESP32 rules operation priority regression from v13.3.0.4 (#22636)
+- GUI display power button regression from v14.3.0.5 (#15788)
+- MCP23xxx, PCF8574 and Shift595 power control when a display is configured regression from v14.3.0.7
+- Display DisplayMode adds a display device while not configured
+- GUI timing related divide by zero exception on screen updates
+
+## [14.4.0] 20241211
+- Release Rudolph
+
+## [14.3.0.7] 20241211
+### Added
+- Support for TM1640 based IoTTimer by Stefan Oskamp (#21376)
+- Command `SetOption161 1` to disable display of state text (#22515)
+- ESP32 new BLE filters by name and minimum RSSI (#22530)
+- ESP32 Hybrid compile take custom boards settings in account (#22542)
+- ESP32 ULP lp_core to Berry ULP module (#22567)
+- Shelly 1 Gen3 template {"NAME":"Shelly 1 Gen3","GPIO":[0,0,0,4736,0,224,0,0,1,1,192,0,0,0,0,0,0,0,0,576,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio3 10000,10000,4000"}
+- Shelly 1PM Gen3 template {"NAME":"Shelly 1PM Gen3","GPIO":[0,32,0,4736,224,0,3200,8161,576,1,192,0,0,0,0,0,0,0,0,1,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio3 10000,10000,4000"}
+- Shelly 2PM Gen3 template {"NAME":"Shelly 2PM Gen3","GPIO":[9472,3458,576,225,4736,224,640,608,1,1,193,0,0,0,0,0,0,0,192,32,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio4 10000,10000,4000"}
+- Shelly i4 Gen3 template {"NAME":"Shelly i4 Gen3","GPIO":[0,0,0,4736,32,195,194,193,1,1,192,0,0,0,0,0,0,0,0,0,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio3 10000,10000,4000}
+- Show Active Power Total with any multi-phase energy monitoring (#22579)
+- Command `SetOption162 1` to disable adding export energy to energy today (#22578)
+- ESP32 support for WPA2/3 Enterprise conditional in core v3.1.0.241206 (#22600)
+- Support for Sonoff POWCT Energy Export Active (#22596)
+- Improved auto-selection of LED hardware support (RMT, SPI) (#22618)
 
 ### Breaking Changed
+- ESP32 ArtNet switches from GRB to RGB encoding (#22556)
 
 ### Changed
+- ESP32 max number of supported switches/buttons/relays from 28 to 32
+- ESP32 max number of interlocks from 14 to 16
+- ESP32 Platform from 2024.11.30 to 2024.11.31, Framework (Arduino Core) from v3.1.0.241030 to v3.1.0.241117 and IDF to 5.3.1.241024 (#22504)
+- Prevent active BLE operations with unencrypted MI-format beacons (#22453)
+- ESP32 replaced NeoPixelBus with TasmotaLED (#22556)
+- ESP32 Platform from 2024.11.31 to 2024.12.30, Framework (Arduino Core) from v3.1.0.241117 to v3.1.0.241206 and IDF to 5.3.2 (#22600)
+- RG-15 sensor name from RG-15 to RG15 (#22612)
+
+### Fixed
+- ESP32 upgrade by file upload response based on file size (#22500)
+- Wrong GUI Module and Template drop down list indexes regression
+- Use HTML escape on File System Edit File load (#22492)
+- Magic switch applying masking window to any power change (#22535)
+- Shift595 output offsets and restart relay toggles
+- Shutter wrong power ON state (#22548)
+- ESP32-C2 TasmotaLED from not present I2S to SPI (#22575)
+- KNX Scenes index change regression from v14.2.0.4 (#22405)
+- Add GUI submenu headers and refresh configuration button text (#22592)
+- ESP8266 Device Group exception due to lack of stack space (#22271)
+
+## [14.3.0.6] 20241116
+### Added
+- Add command ``WebColor20`` to control color of Button when Off
 
 ### Fixed
 - Matter provisioning with matter.js controller (#22470)
 - Prevent crashing when `display.ini` is missing end `#` (#22471)
 
-### Removed
-
 ## [14.3.0.5] 20241111
 ### Added
 - ESP32 MI32 legacy add config operations (#22458)
 
 ### Changed
 - Redesign GUI adding feedback to buttons, shutters and lights
+- Use command `WebButton1` to change GUI shutter 1 name
 
 ### Removed
 - Command ``SetOption161 1`` to disable web page slider updates by commands
@@ -36,6 +129,7 @@ All notable changes to this project will be documented in this file.
 - Support for MS5837 pressure and temperature sensor (#22376)
 - Berry add I2C read16/write16 supporting Little Endian (#22448)
 - Berry drivers for PCA9535 (generic and in SenseCAP D1) (#22451)
+- Shelly DALI Dimmer Gen3 template {"NAME":"Shelly DALI Dimmer Gen3","GPIO":[34,4736,0,3840,11360,11392,128,129,0,1,576,0,0,0,0,0,0,0,0,1,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio1 10000,10000,4000}
 
 ### Changed
 - AHT1X/AHT2X/AHT3X ready for virtual I2C (#22427)
@@ -105,8 +199,6 @@ All notable changes to this project will be documented in this file.
 ### Fixed
 - EQ3 TRV firmware version 1.46 fails if the default true is used in subscribe on the notify characteristic (#22328)
 
-## [Released]
-
 ## [14.3.0] 20241015
 - Release Robert
 

FIRMWARE.md

@@ -14,11 +14,11 @@ If you like **Tasmota**, give it a star, or fork it and contribute!
 [![GitHub forks](https://img.shields.io/github/forks/arendst/Tasmota.svg?style=social&label=Fork)](https://github.com/arendst/Tasmota/network)
 [![donate](https://img.shields.io/badge/donate-PayPal-blue.svg)](https://paypal.me/tasmota)
 
-See [CHANGELOG.md](https://github.com/arendst/Tasmota/blob/development/tasmota/CHANGELOG.md) for changes since last release.
+See [CHANGELOG.md](https://github.com/arendst/Tasmota/blob/development/CHANGELOG.md) for changes since last release.
 
 ## Development
 
-[![Dev Version](https://img.shields.io/badge/development%20version-v14.3.x.x-blue.svg)](https://github.com/arendst/Tasmota)
+[![Dev Version](https://img.shields.io/badge/development%20version-v14.4.x.x-blue.svg)](https://github.com/arendst/Tasmota)
 [![Download Dev](https://img.shields.io/badge/download-development-yellow.svg)](http://ota.tasmota.com/tasmota/)
 [![Tasmota CI](https://github.com/arendst/Tasmota/workflows/Tasmota%20CI/badge.svg)](https://github.com/arendst/Tasmota/actions?query=workflow%3A%22Tasmota+CI%22)
 [![Tasmota ESP32 CI](https://github.com/arendst/Tasmota/workflows/Tasmota%20ESP32%20CI/badge.svg)](https://github.com/arendst/Tasmota/actions?query=workflow%3A%22Tasmota+ESP32+CI%22)

I2CDEVICES.md

@@ -129,5 +129,6 @@ Index | Define              | Driver   | Device   | Address(es) | Bus2 | Descrip
   89  | USE_HX711_M5SCALES  | xsns_34  | M5SCALES  | 0x26       | Yes  | M5Unit (Mini)Scales(HX711 STM32) U177
   90  | USE_RX8010          | xdrv_56  | RX8010    | 0x32       | Yes  | RX8010 RTC from IOTTIMER
   91  | USE_MS5837          | xsns_116 | MS5837    | 0x76       |      | Pressure and temperature sensor
+  92  | USE_PCF85063        | xdrv_56  | PCF85063  | 0x51       |      | PCF85063 Real time clock
 
   NOTE: Bus2 supported on ESP32 only.

README.md

@@ -31,7 +31,7 @@ Firmware binaries can be downloaded from http://ota.tasmota.com/tasmota/release/
 
 ## Development
 
-[![Dev Version](https://img.shields.io/badge/development%20version-v14.3.x.x-blue.svg)](https://github.com/arendst/Tasmota)
+[![Dev Version](https://img.shields.io/badge/development%20version-v14.4.x.x-blue.svg)](https://github.com/arendst/Tasmota)
 [![Download Dev](https://img.shields.io/badge/download-development-yellow.svg)](http://ota.tasmota.com/tasmota/)
 [![Tasmota CI](https://github.com/arendst/Tasmota/actions/workflows/build_all_the_things.yml/badge.svg)](https://github.com/arendst/Tasmota/actions/workflows/build_all_the_things.yml)
 [![Build_development](https://github.com/arendst/Tasmota/actions/workflows/Tasmota_build_devel.yml/badge.svg)](https://github.com/arendst/Tasmota/actions/workflows/Tasmota_build_devel.yml)

RELEASENOTES.md

@@ -36,9 +36,9 @@ While fallback or downgrading is common practice it was never supported due to S
 
 This release will be supported from ESP8266/Arduino library Core version **2.7.8** due to reported security and stability issues on previous Core version. This will also support gzipped binaries.
 
-This release will be supported from ESP32/Arduino library Core version **v3.1.0.240926**.
+This release will be supported from ESP32/Arduino library Core version **v3.1.0.241206**.
 
-Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.0.240926 have been removed.
+Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.0.241206 have been removed.
 
 ## Support of TLS
 
@@ -75,12 +75,12 @@ Latest released binaries can be downloaded from
 - http://ota.tasmota.com/tasmota/release
 
 Historical binaries can be downloaded from
-- http://ota.tasmota.com/tasmota/release-14.3.0
+- http://ota.tasmota.com/tasmota/release-14.4.1
 
 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz``
 
 ### ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based
-The following binary downloads have been compiled with ESP32/Arduino library core version **v3.1.0.240926**.
+The following binary downloads have been compiled with ESP32/Arduino library core version **v3.1.0.241206**.
 
 - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash.  **RECOMMENDED RELEASE BINARY**
 - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
@@ -104,7 +104,7 @@ Latest released binaries can be downloaded from
 - https://ota.tasmota.com/tasmota32/release
 
 Historical binaries can be downloaded from
-- https://ota.tasmota.com/tasmota32/release-14.3.0
+- https://ota.tasmota.com/tasmota32/release-14.4.1
 
 The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin``
 
@@ -114,61 +114,32 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 
 [Complete list](BUILDS.md) of available feature and sensors.
 
-## Changelog v14.3.0.6
+## Changelog v14.4.1.1
 ### Added
-- Add command ``WebColor20`` to control color of Button when Off
-- DALI support for short addresses (gear) and groups
-- DALI command `DaliGear` to set max found gear to speed up scan response
-- DALI command `DaliGroup` to add gear to groups
-- DALI command `DaliTarget` to set light control broadcast, group number or gear number
-- DALI command `DaliGroupSliders 0..16` to show GUI group sliders with feedback disabling `DaliLight`
-- DALI inverted signal configuration using GPIO DALI RX_i/TX_i
-- Support for I2C over Serial [#22444](https://github.com/arendst/Tasmota/issues/22444)
-- Support KNX for scripts [#22429](https://github.com/arendst/Tasmota/issues/22429)
-- Support deep sleep (standby) for VL53L0X [#22441](https://github.com/arendst/Tasmota/issues/22441)
-- Support for Shelly DALI Dimmer Gen3
-- Support for HLK-LD2410S 24GHz smart wave motion sensor [#22253](https://github.com/arendst/Tasmota/issues/22253)
-- Support for US AQI and EPA AQI in PMS5003x sensors [#22294](https://github.com/arendst/Tasmota/issues/22294)
-- Support for MS5837 pressure and temperature sensor [#22376](https://github.com/arendst/Tasmota/issues/22376)
-- HLK-LD2410 Engineering mode [#21880](https://github.com/arendst/Tasmota/issues/21880)
-- Mitsubishi Electric HVAC Operation time for MiElHVAC [#22334](https://github.com/arendst/Tasmota/issues/22334)
-- Mitsubishi Electric HVAC Outdoor Temperature for MiElHVAC [#22345](https://github.com/arendst/Tasmota/issues/22345)
-- Mitsubishi Electric HVAC Compressor Frequency for MiElHVAC [#22347](https://github.com/arendst/Tasmota/issues/22347)
-- Mitsubishi Electric HVAC Auto Clear Remote Temp for MiElHVAC [#22370](https://github.com/arendst/Tasmota/issues/22370)
-- SolaxX1 Meter mode [#22330](https://github.com/arendst/Tasmota/issues/22330)
-- ESP32 MI32 legacy add config operations [#22458](https://github.com/arendst/Tasmota/issues/22458)
-- BLE track devices with RPA [#22300](https://github.com/arendst/Tasmota/issues/22300)
-- Berry add I2C read16/write16 supporting Little Endian [#22448](https://github.com/arendst/Tasmota/issues/22448)
-- Berry drivers for PCA9535 (generic and in SenseCAP D1) [#22451](https://github.com/arendst/Tasmota/issues/22451)
-- HASPmota `haspmota.get_pages()` to get the sorted list of pages [#22358](https://github.com/arendst/Tasmota/issues/22358)
+- Command ``SetOption163 1`` to disable display of Device name in GUI header
+- Support for PCF85063 RTC [#22727](https://github.com/arendst/Tasmota/issues/22727)
+- Berry `animate.crenel` primitive [#22673](https://github.com/arendst/Tasmota/issues/22673)
+- Berry scroll to Leds_matrix [#22693](https://github.com/arendst/Tasmota/issues/22693)
+- Berry add unicode encoding to string parsing [#22713](https://github.com/arendst/Tasmota/issues/22713)
+- Berry `tasmota.int(v, min, max)` function [#22723](https://github.com/arendst/Tasmota/issues/22723)
+- Berry driver for M5Stack 8encoder [#22724](https://github.com/arendst/Tasmota/issues/22724)
 
 ### Breaking Changed
 
 ### Changed
-- ESP32 Platform from 2024.09.30 to 2024.11.30, Framework (Arduino Core) from v3.1.0.240926 to v3.1.0.241030 and IDF to 5.3.1.241024 [#22384](https://github.com/arendst/Tasmota/issues/22384)
-- ESP32 LVGL library from v9.2.0 to v9.2.2 [#22385](https://github.com/arendst/Tasmota/issues/22385)
-- Redesign GUI adding feedback to buttons, shutters and lights
-- Unit (k)VAr(h) to (k)var(h) [#22435](https://github.com/arendst/Tasmota/issues/22435)
-- AHT1X/AHT2X/AHT3X ready for virtual I2C [#22427](https://github.com/arendst/Tasmota/issues/22427)
-- SGP4X ready for virtual I2C [#22427](https://github.com/arendst/Tasmota/issues/22427)
-- SCD40 reduce logging levels [#22443](https://github.com/arendst/Tasmota/issues/22443)
-- SCD40 ready for virtual I2C [#22443](https://github.com/arendst/Tasmota/issues/22443)
-- Refactored `i2c_enabled` as array [#22387](https://github.com/arendst/Tasmota/issues/22387)
-- DALI renamed commands `DaliCommission` to `DaliScan` and `DaliWeb` to `DaliLight`
-- DALI set Tasmota light control as default
-- Shutter optimized behavior to publish shutter data with sensor request [#22353](https://github.com/arendst/Tasmota/issues/22353)
-- HASPmota support for page delete and object updates [#22311](https://github.com/arendst/Tasmota/issues/22311)
+- GPIOViewer from v1.5.6 to v1.5.8
+- Postpone save_data during light animation when fade is Off
+- ESP32 disable PSRAM check (and on restart some relay toggles) with `#define DISABLE_PSRAMCHECK true` [#21266](https://github.com/arendst/Tasmota/issues/21266)
+- Berry bit-shift operators to `int64` [#22709](https://github.com/arendst/Tasmota/issues/22709)
+- HASPmota use 'roboto.ttf' for automatic sizing of default font [#22697](https://github.com/arendst/Tasmota/issues/22697)
+- HASPmota add 'tag' attribute for free-form JSON [#22698](https://github.com/arendst/Tasmota/issues/22698)
+- HASPmota support for `tabview` [#22707](https://github.com/arendst/Tasmota/issues/22707)
 
 ### Fixed
-- FUNC_COMMAND linked list command buffer corruption by shutter driver
-- Prevent crashing when `display.ini` is missing end `#` [#22471](https://github.com/arendst/Tasmota/issues/22471)
-- Alexa Hue with multiple devices [#22383](https://github.com/arendst/Tasmota/issues/22383)
-- Mitsubishi Electric HVAC Standby Stage for MiElHVAC [#22430](https://github.com/arendst/Tasmota/issues/22430)
-- EQ3 TRV firmware version 1.46 fails if the default true is used in subscribe on the notify characteristic [#22328](https://github.com/arendst/Tasmota/issues/22328)
-- Ethernet on -DFRAMEWORK_ARDUINO_ITEAD framework regression from v14.3.0 [#22367](https://github.com/arendst/Tasmota/issues/22367)
-- ESP32 Arduino Core IPv6 zones used by Matter [#22378](https://github.com/arendst/Tasmota/issues/22378)
-- ESP32, ESP32-S2 and ESP32-S3 re-enable touch buttons [#22446](https://github.com/arendst/Tasmota/issues/22446)
-- ESP32-S3 UART output mode for Tx [#22426](https://github.com/arendst/Tasmota/issues/22426)
-- Matter provisioning with matter.js controller [#22470](https://github.com/arendst/Tasmota/issues/22470)
+- Webcam compilation with `define USE_WEBCAM` but without `define ENABLE_RTSPSERVER` [#22686](https://github.com/arendst/Tasmota/issues/22686)
+- Berry Zigbee fix wrong attributes [#22684](https://github.com/arendst/Tasmota/issues/22684)
+- Berry walrus operator [#22685](https://github.com/arendst/Tasmota/issues/22685)
+- LVGL updated `Antiburn.tapp` [#22699](https://github.com/arendst/Tasmota/issues/22699)
+- Matter Air Quality sensor [#22708](https://github.com/arendst/Tasmota/issues/22708)
 
 ### Removed

TEMPLATES.md

@@ -5,7 +5,7 @@
 
 # Templates
 
-Find below the available templates as of October 2024. More template information can be found in the [Tasmota Device Templates Repository](http://blakadder.github.io/templates)
+Find below the available templates as of December 2024. More template information can be found in the [Tasmota Device Templates Repository](http://blakadder.github.io/templates)
 
 ## Adapter Board
 ```

lib/default/WiFiHelper/src/WiFiHelper.h

@@ -59,7 +59,7 @@ typedef enum WiFiPhyMode
 class WiFiHelper {
 public:
 #ifdef ESP32
-  static wl_status_t begin(const char* wpa2_ssid, wpa2_auth_method_t method, const char* wpa2_identity=NULL, const char* wpa2_username=NULL, const char *wpa2_password=NULL, const char* ca_pem=NULL, const char* client_crt=NULL, const char* client_key=NULL, int32_t channel=0, const uint8_t* bssid=0, bool connect=true);
+  static wl_status_t begin(const char* wpa2_ssid, wpa2_auth_method_t method, const char* wpa2_identity=NULL, const char* wpa2_username=NULL, const char *wpa2_password=NULL, const char* ca_pem=NULL, const char* client_crt=NULL, const char* client_key=NULL, int ttls_phase2_type=-1, int32_t channel=0, const uint8_t* bssid=0, bool connect=true);
 #endif
   static wl_status_t begin(const char* ssid, const char *passphrase = NULL, int32_t channel = 0, const uint8_t* bssid = NULL, bool connect = true);
   static wl_status_t begin(char* ssid, char *passphrase = NULL, int32_t channel = 0, const uint8_t* bssid = NULL, bool connect = true);
@@ -94,4 +94,4 @@ class WiFiHelper {
 
 
 
-#endif // WIFIHELPER_H
+#endif // WIFIHELPER_H