Skip to content

Sonoff-Tasmota
Compare
Choose a tag to compare
@arendst arendst released this 01 Dec 13:53
· 20168 commits to master since this release
v5.10.0
3403ca1

5.10.0 20171201

  • Upgrade library ArduinoJson to 5.11.2
  • Upgrade library IRRemoteEsp8266 to 2.2.1 + 2 commits but disabled some protocols (code size reduction)
  • Upgrade library NeoPixelBus to 2.2.9
  • Upgrade library OneWire to 2.3.3 + 6 commits and disabled CRC lookup-table (#define ONEWIRE_CRC8_TABLE 0) (code size reduction)
  • Update library PubSubClient to 2.6 + 9 commits and additional delay (#790)
  • Update core_esp8266_wiring_digital.c to latest (staged) level
  • Patch library I2Cdevlib-Core for esp8266-core 2.4.0-rc2 compatibility
  • Remove command EnergyReset 1..3 now replaced by ENergyReset1 to EnergyReset3
  • Remove spaces in JSON messages (code size reduction)
  • Renamed xsns_05_ds18x20.ino to xsns_05_ds18x20_legacy.ino still using library OneWire and providing dynamic sensor scan
  • Fix possible iram1_0_seg compile error by shrinking ICACHE_RAM_ATTR code usage
  • Fix PWM watchdog timeout if Dimmer is set to 100 or Color set to 0xFF (#1146)
  • Fix Sonoff Bridge Learn Mode hang caused by unrecognised RF code (#1181)
  • Fix blank console log window by using XML character encoding (#1187)
  • Fix wrong response name for command HlwISet (#1214)
  • Fix DHT type sensor timeout recognition by distinguish "signal already there" from "timeout" (#1233)
  • Add fixed color options 1..12 to command Color
  • Add + (plus) and - (minus) to commands Dimmer (+10/-10), Speed and Scheme
  • Add + (plus) and - (minus) to command Color to select 1 out of 12 preset colors
  • Add + (plus) and - (minus) to command Ct to control ColdWarm led ColorTemperature (+34/-34)
  • Add commands EnergyReset1 0..42500, EnergyReset2 0..42500 and EnergyReset3 0..42500000 to (Re)set Energy Today, Yesterday or Total respectively in Wh (#406, #685, #1202)
  • Add optional ADS1115 driver as alternative for unsupported I2Cdevlib in esp8266-core 2.4.0-rc2
  • Add support for INA219 Voltage and Current sensor to be enabled in user_config.h with define USE_INA219
  • Add support for Arilux LC11 (Clearing RF home code when selecting no Arilux module)
  • Add support for WS2812 RGBW ledstrips to be enabled in user_config.h with define USE_WS2812_CTYPE (#1156)
  • Add SettingsSaveAll routine to command SaveData to be used before controlled power down (#1202)
  • Add option PUSHBUTTON_TOGGLE (SwitchMode 7) to allow toggling on any switch change (#1221)
  • Add new xdrv_05_ds18x20.ino free from library OneWire and add the following features:
    • Add support for DS1822
    • Add forced setting of 12-bit resolution for selected device types (#1222)
    • Add read temperature retry counter (#1215)
    • Fix lost sensors by performing sensor probe at restart only thereby removing dynamic sensor probe (#1215)
    • Fix sensor address sorting using ascending sort on sensor type followed by sensor address
    • Rewrite JSON resulting in shorter message allowing more sensors in default firmware image: "DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6}
  • Add additional define in user_config.h to select either single sensor (defines disabled), new multi sensor (USE_DS18X20) or legacy multi sensor (USE_DS18X20_LEGACY)
  • Add clock support for more different pixel counts (#1226)
  • Add support for Sonoff Dual R2 (#1249)
  • Add FriendlyName to web page tab and add program information to web page footer (#1275)

Provided pre-compiled binary downloads

  • sonoff.bin = the default firmware for all devices in English
  • sonoff-NL.bin = the default firmware for all devices in Dutch
  • sonoff-DE.bin = the default firmware for all devices in German
  • sonoff-PL.bin = the default firmware for all devices in Polish
  • sonoff-minimal.bin = is interim firmware to be used when the above firmware images become too big to fit as OTA or web upload; installing this one first and THEN uploading the desired sonoff.bin allows for future firmware size growth over the OTA file limit of 1/2 flash size.
  • sonoff-ds18x20.bin = is a version of sonoff.bin with the USE_DS18x20 define enabled and a larger MQTT buffer size to be used by people having more than 6 ds18x20 sensors connected.
Assets 8
Loading