New PyTv

Grammar

Magic Comment Output

1. Every verilog line should follow a magic comment: #/.
   • Warning: The verilog line must be consistent with python indent
   • Warning: No blank spaces are allowed between # and /. Some IDEs (such as pycharm) automatically adds a blank space after #
2. Inside a magic comment, the content enclosed by 2 apostrophes are intepreted as python variables. For instance: #/ LLR_RECV[`h_bit`:`l_bit`] <= 12'b`llr_1`;
   • Idealy, PyTV supports all sorts of python expressions between 2 apostrophes. But for safety considerations, we do recommand doing operations outside the apostrophes and write only single python variable between the apostrophes.

Defining a Verilog Module with PyTV

1. Every definition of a verilog module is written in magic comments and embodied in the definition of a python function.
   • The name of the python function must start with Module. The function name is formulated as Module_abstract_module_name. In the current PyTV version, please do not define a normal function whose name start with Module. Also, the module function definition should be written in a single line. (We prepare to solve these 2 issues in future releases)
   • Every module function should be decorated with pytv using @pytv. Please write @pytv only in the line above each module function definition.
   • The parameters of the python function can be of any data type.
   • The function must not have any return value (We will support module functions with return values in future releases).
   • -Below is a very short definition of a verilog module using PyTV

        @pytv
        def ModuleBasic(p1, p2):
            #/ module BASIC(
            if p1 > 0:
               #/ portBA1,
               pass
            if p2 > 0:
               #/ portBA2,
               pass
            #/ );
            #/ start of BASIC
            #/ middle of BASIC
            #/ end of BASIC
            #/ endmodule 

Instantiation with PyTV

1. Module Instantiation with PyTV is done by directly calling the defined module function with the original parameters and extra parameters for ports and inst name (This parameter can be left out with auto-naming).
2. Grammar for instantiation: ModuleYOUR_MODULE_TO_INSTANTIATE (param1 = p1, param2 = p2, paramN = pN, PORTS = PORTS_DICT, INST_NAME = MY_INST_NAME).
3. An example for instantiation:

      ModuleMUL(param1 = 1, param2 = 1, paramN = 1, PORTS = ["my_mul_port1", "my_mul_port2", "my_mul_port3"], INST_NAME = "mymul_inst")
      inst_ports_dict = {'PORT1':'name_port1', 'PORT2':'name_port2'}
      for i in range (1,5):
            ModuleBasic(p1=1, p2=1, PORTS=inst_ports_dict)
            ModuleBasic(p1=rst1, p2=-10, PORTS=["PORTA"])
            ModuleBasic(p1=1, p2=1, PORTS=inst_ports_dict)

4. Constraints:
   • The function param PORTS does not appear in the user's definition of the python function. It's a parameter added to the function by the decorator pytv. Unless you are instantiating a top module, you should assign value to this parameter (otherwise you will see warning message). Value assigned to this param can either be a python list or dict. It is NOT allowed to assign PORTS with a string.
   • The function param INST_NAME is not compulsory. Actually, we recommend the users to uuse automatic inst naming. (If this INST_NAME is not assigned a value, pytv will automatically name the instance the module)
   • The function param MODULE_NAME is supported but we strongly recommend the users to avoid using it because its usage may potentially corrupt the naming space in pytv.
   • Before generating instantiation code in the upper module, pytv will check whether the number of ports in the list/dict assigned to PORTS matches the ports in the module to be instantiated. If mismatch is found, pytv will throw an exception and terminate code generation. So make sure you have passed correct value to PORTS.
   • All parameters should be passed in the keyword argument format, but the order in which you pass the arguments can be switched.

Auto Naming with PyTV

PyTV enables auto naming of modules, module files and instances. Auto-naming is done whenever a module function is called without the argument MODULE_NAME or INST_NAME. There are 3 naming modes to choose from (HASH, MD5_SHORT, SEQUENTIAL). SEQUENTIAL is the most recommended naming mode.

Setting naming mode

1. PyTV provides an api for specifying naming mode:

       pytv.set_naming_mode("SEQUENTIAL")

2. You can also set naming mode by passing args in command line:

       --naming_mode "SEQUENTIAL"

Auto Naming Rules

1. Naming of modules or module files
   • Whether to generate new module: Every time a module function is called, pytv reads the python level params and inspects whether the params overlap with some earlier calls. If overlap is found, pytv will not generate a new module file.
   • Naming newly generated module: The module name in pytv is formulated as abstract_module_name + module_identifier. abstract_module_name is read from the name of the module function. module_identifier is auto-generated according to certain rules to distinguish between different modules. In SEQUENTIAL naming mode, module_identifier is a 10-digit hexadecimal number. In HASH mode, module_identifier is a hash value of the python layer params the module function received. In MD5_SHORT mode, module_identifier is a cut MD5 value of the python layer params.
2. Naming of instances
   • Instances are named according to the module they belong to. To avoid naming conflict across different instances, there is also an instance sequence number included in the instance names.
   • The instance name is formulated as: u_sequence_number_module_name.
3. An example for naming of module and instance.
   • pytv line: ModuleBasic(p1=1, p2=1, PORTS=inst_ports_dict)
   • generated module name: Basic0000000001
   • generated module file name: Basic0000000001.v
   • generated instance name: Basic0000000001 u_0000000002_Basic0000000001 (This is 2nd time that the module function ModuleBasic is called with the same python layer params)

Running pytv for generating RTL code

Run with command line

You can run pytv with the following shell script:

cd "C:\your\path"
python your_pytv_file.py --naming_mode HASH --root_dir "C:\your\root_dir" --flag_save_param --disable_warning

Configuration command line arguments

Meaning of each command line argument is presented below:

1. --naming_mode

   • Meaning: Sets the naming mode for the RTL files.
   • Possible Values:
     • HASH: Uses a hash value as part of the filename (default).
     • MD5_SHORT: Uses a shortened MD5 value as part of the filename.
     • SEQUENTIAL: Uses a sequential number as part of the filename.

2. --root_dir

   • Meaning: Specifies the path where RTL files will be saved.
   • Possible Values: Any valid folder path. The user must either pass this argument in command line or set moduleloader.root_dir with api functions. Otherwise, exceptions will be raised and RTL code generation will not start.

3. --flag_save_param

   • Meaning: Indicates whether to save the parameter file.
   • Possible Values:
     • store_true: If this parameter is present, the parameter file will be saved.
     • Default is False if this parameter is not provided.

4. --disable_warning

   • Meaning: Indicates whether to disable warnings (if true, pytv will display no warnings).
   • Possible Values:
     • store_true: If this parameter is present, the warnings will be dis-enabled.
     • Default is False if this parameter is not provided.

Run with no command line args

If you want to run your pytv file without command line, you can configure root directory, naming, saving and warning settings with api functions of pytv. Examples of usage are presented below:

1. moduleloader.set_naming_mode("SEQUENTIAL")
2. moduleloader.set_root_dir("C:\信道编码\SummerSchool\提交")
3. moduleloader.saveParams()
4. moduleloader.disEnableWarning() Note that these api functions must be called before you call a pytv module function.

Output

1. You can find the generated module files in the folder your_root_dir\\RTL_GEN.
2. You can find the saved module parameters in the folder your_root_dir\\PARAMS.
3. You can view info and warning messages in the terminal.