Skip to content

betamoojw/knxduino-library

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

7 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

KNXduino library for KNXduino project

  • See hardware and instructions
  • Only STM32G0 MCUs are supported. This library will not work with Arduino Uno and other non-STM32 boards!

Hardwired pin-mappings

  • For KNXduino One Board = KNXDUINO_ONE_PINMAPPING
    • PA0 (COMP1_OUT) - connect to PA2 (TIM15_CH1)
    • PA1 (COMP1_INP) - KNX_RX_AN (bus voltage/34)
    • PA2 (TIM15_CH1)
    • PA3 (TIM15_CH2) - KNX_TX
    • PA9 (USART1_TX) - Debug UART (Serial) TX
    • PA10 (USART1_RX) - Debug UART (Serial) RX
  • For NUCLEO-G071RB Board = KNXDUINO_NUCLEO_PINMAPPING
    • PA0 (COMP1_OUT) - connect to PC1 (TIM15_CH1)
    • PA1 (COMP1_INP) - KNX_RX_AN (bus voltage/34)
    • PC1 (TIM15_CH1)
    • PC2 (TIM15_CH2) - KNX_TX
    • PA2 (USART2_TX) - Debug UART (Serial) TX
    • PA3 (USART2_RX) - Debug UART (Serial) RX

Acknowledgement

About

Arduino library for KNXduino project, see https://github.com/pavkriz/knxduino

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 86.9%
  • C 13.1%