3D Printing the Momobox

The momobox is build from several mechanical components. The full set of parts is in the packaging directory in .stl format.

The CAD is built using OnShape. The repository for the Momobox is here. This should be possible to clone and modify using a free OnShape account if any changes are desired.

The momobox was printed using the Prusa i3 MK3S+ 3D Printer, using the Prusa PLA and PETG filaments.

Below is a summary of the print setups for the current design and their resource usage. Based on the printer above; times and material usage are subject to your specific printer model.

Build parameters are per Version 8 of the mechanical design and are subject to change.

Component	Filament Type	Print Setting	Infill	Brim	Supports	Filament Used [g]	Print Time
Base	Prusament PETG	0.30 mm DRAFT	20%	No	Underside Only	180.9	9h 37m
Lid	Prusament PETG	0.20 mm SPEED	20%	No	None	39.2	2h 56m
Board Support	Prusament PETG	0.20 mm SPEED	20%	No	Build Plate only	13.7	1h 18m
M's (2X), Hearts (2X), Speaker Clips (2X)	Prusament PETG	0.20 mm SPEED	20%	No	None	43.71	3h 30m
Cover Plate	Prusament PETG	0.20 mm SPEED	20%	Yes	None	2.6	17m
Stage & Stage Cap	Prusament PETG	0.20 mm SPEED	20%	No	None	34.2	2h 10m
TOTAL						314.3	19h 48m