Skip to content

carblue/acos5_gui

Repository files navigation

acos5_gui

An administration tool for ACS ACOS5 (V2: Smart Card/CryptoMate64 and V3: Smart Card/CryptoMate Nano), based on driver acos5 for OpenSC.

For some of OpenSC's internal card drivers, there exist command-line tools. This is the Graphical User Interface tool for external driver acos5, built using the IUP GUI framework.

For some details, it's recommended to consult the hardware's "Reference Manual", available on request from [email protected]

ATTENTION: Known Issue: Driver and acos5_gui are designed to retain readiness for operation of ACS proprietary tools with a card. While testing that with ACS ACSCMU, I did a Login and changed the token label. The result was, that ACSCMU corrupted EF.TokenInfo file 0x5032. This is just another example why ACSCMU of client kit IMO is suboptimal. One has to correct EF.TokenInfo manually afterwards. Otherwise acos5_gui can't decode and display that file's content any more. OpenSC's ASN.1 parsing is more tolerant (than libtasn1) towards that issue and will read and interpret the misplaced "tokenflags".

The default in dub.json assumes an OpenSC binary version 0.25.0 or 0.25.1 is installed. For an OpenSC binary version 0.24.0, change "subConfigurations": "opensc": "deimos" to "opensc": "deimosPrior". It's recommended to use OpenSC binary version 0.25.

Next to libraries required according to dub.json, both libraries built from the driver repo are prerequisites being installed and OpenSC (opensc.conf) configured to use them:
This repo will always be closely related to the driver acos5 development. Make sure to have the latest commit installed.

Prerequisites required to be installed:
Ubuntu: $ sudo apt-get update && sudo apt-get install opensc libtasn1-6
Other dependencies:
Look at IUP binding for more details about IUP and installation. The required binaries are currently:
Linux: libfreetype.so
From IUP:
Windows: freetype.dll and freetype.lib
Linux: libiup.so Windows: iup.dll and iup.lib
Linux: libiupcontrols.so Windows: iupcontrols.dll and iupcontrols.lib
Linux: libiupcd.so Windows: iupcd.dll and iupcd.lib

From CD:
Linux: libcd.so Windows: cd.dll and cd.lib

For Linux: install package libtasn1-6 (providing libtasn1.so.6): for Windows, the required files are included in the tasn1 binding.

Build
Inspect dub.json and check whether the settings are correct for You. If You go with the DMD compiler, then only this 1 important point remains, referring to this section:

	"subConfigurations": {
		"pkcs11": "derelict",
		"opensc": "deimos"
	},

the entry for "opensc": must be "deimos" if OpenSC version 0.25.0 or 0.25.1 is installed, or
the entry for "opensc": must be "deimosPrior" if OpenSC version 0.24.0 is installed. Other OpenSC versions are not suitable.

One of the D compilers DMD or LDC, and DUB are required (downloads from https://dlang.org/download.html have DUB included), then run e.g. wih DMD installed
dub build (or dub run, in order to build and invoke acos5_gui)

alt text
figure 1

alt text
figure 2

This is [WIP] work in progress

Features planned/about to be implemented:

  • View Cryptoki/Slot/Token-Info.
  • View (, manipulate) the filesystem in a tree- and other views (with some obvious restrictions, e.g. resizing files is impossible with this card type).
  • RSA keys/PrKDF/PuKDF handling.
  • Sym keys/SKDF handling.
  • Certificate/CDF handling
  • Pin/AOD handling.
  • Export/Import file system
  • Initialize card
    ...

The appearance of acos5_gui (visibility of tabs) depends on card content. E.g. if there is no MF, then there is no value in showing any tab except the one dedicated to creating an initial PKCS#15 file system. Or if there is no EF.SKDF file on the token, then the tab "KeySym (AES/3DES)" won't be accessible. All these checks take time and not all need to be done on each app invokation. {UPDATE: currently deactivated: The file .acos5_gui will be created in user's home directory on first invokation, in order to remember results of some of these checks. But this feature is evolving and implemented partially only, e.g. it doesn't currently recognise changes in check results. Therefore, if You feel something is wrong regarding that, for the time being delete everything for that card serial no. within .acos5_gui and save or delete .acos5_gui, and restart acos5_gui}

A short introduction to usage (by tab):

  1. Cryptoki/Slot/Token-Info: All content is read-only: 2 GUI controls: A text window on the right with some info and a 2-colum matrix on the left: It's info shown is from calling:
    C_GetInfo (information about the PKCS#11 (Cryptoki) implementing library used, opensc-pkcs11.so/dll/dylib in this case,
    C_GetSlotList (information about how many slots with a smard card chip accessible where found: If there is no smart card/USB token plugged in, the application will shut down immediately, thus You won't see a 0 there. 1 token plugged in is the usual case and 1 slot should then show up there. Don't plug in more than 1 token: acos5_gui can't currently let You select which one to use from alternatives (TODO) and it's internal data structures are designed to hold info from 1 card/token only.
    C_GetSlotInfo obtains information about a particular slot in the system. Slot is about the Reader. For USB tokens CryptoMate64 and CryptoMate Nano that's all except the built-in crypto chip and Token is about the crypto chip.
    C_GetTokenInfo The info shown here is from different sources like among others file 0x5032 (TokenInfo_file) within the application's directory. acos5_gui is currently designed to handle 1 application only, automatically selected. The 'Token label' get's assembled by OpenSC from application's user's pin name and TokenInfo_file's label.
    The line 'Token hardware version major.minor' tells about which smart card/USB token hardware version is currently connected, important for the next 2 lines:
    The last 2 lines refer to FIPS (relevant for version 3 hardware only): The first line refers to the operation mode byte setting done during card initialization (or as default factory setting==FIPS mode) and the second line refers to whether the card detects itself as compliant to FIPS, which is possible only in operation mode==FIPS mode and when conforming to some other complex requirements detailed in the reference manual. Some of the driver's behavior depends on this, e.g. which RSA keyLength are allowed.

  2. file system: All content is read-only currently: The info elements are a tree-view of the file system and 2 text panes, one for raw content, the other for displaying either RSA file details and/or decoded ASN.1 content. Click on a file/directory in the tree-view. If the file can't be read, only Header/meta infos (FCI) will be shown. You'll need knowledge from the reference manual to interpret that: It adds to the tree-view info what is missing there: The file access rights of currently selected file and it's enclosing DF: If there are any specified, they are behind bytes 8C 08 7F and possibly for DF after AB.
    tree-view: The check-boxes aren't meant to be clicked, they just indicate, whether the file/directory is activated, i.e. the access rights control does or doesn't apply. Most of the files are associated with a symbol, only a few are not: they are special, internal EF (iEF) files implicitely known by cos5: PinFile, File_with_keys_for_sym_algorithms (AES/3DES/DES) and the Security Environment File, all local to a DM/MF. The files with a bullet symbol are kind of private to the user: OpenSC won't touch/consult them, except for e.g. a file listing, as no PKCS#15 path known to OpenSC points to them.
    All other files have a 'sheet of paper' symbol and are in general accessible by OpenSC because they appear in some path info and are part of the PKCS#15 file structure (all non-leafs and some leafs are ASN.1 encoded). The 2 different kinds are: Files that contain directory-like information (like AODF, PrKDF, PuKDF, CDF, SKDF, DIR, ODF) or have a special meaning for PKCS#15 like file 0x5032 (EF.TokenInfo). On the other hand files that are the leafs of the PKCS#15 tree file structure like Certificates (EF.Cert) and RSA files (EF.RSA_PUB and EF.RSA_PRIV). As an exception, the internal files (PIN, key_sym) don't apppear here as leafs: They are record-based and will be adressed by a record index (Pin.file is meant to have 1 record only) and they should be non-readable, usable only after a Login.
    All PKCS#15 relevant files except internal files (PIN, key_sym, sec_env) are expected to be of file-structure 'transparent'.
    Security Environment File of directory should be readable without any restriction (without Login), but mindlessly ACS forces for V3 cards with FIPS-compliance to be readable only after some authentication, though the content is stipulated and publicly available. This case will be treated without reading the file.
    These files/file types are expected to be readable without any restriction (without Login):
    EF.DIR
    EF.ODF
    EF.TokenInfo
    All Directory files like PRKDF, PUKDF, PUKDF_TRUSTED, SKDF, CDF, CDF_TRUSTED, CDF_USEFUL, DODF, AODF
    This follows the philosophy of OpenSC to inspect a card for "general" information without requiring a Login. A Login is required only for those actions e.g. on files, that request it by there file meta data in file's header. Next to legitimation by a pin verification there is also authentication of a key, possible in the near future (it's not yet implemented in the driver). The way this works is this:

acos5_gui has code to inspect all files of the PKCS#15 file structure and to make sure, the content is PKCS#15 compliant and of type expected (as far as possible, because with OPTIONAL entries missing, there may be indistinguishableness). A failing detection is reported to stdout on Linux and visible by a bullet instead of a 'sheet of paper' symbol.

PS:
Block cipher CBC deciphering doesn't work well for OpenSC versions < 0.20.0 with ACOS5-64: The first 16 bytes of each {AES: 240 bytes/DES: 248 bytes} chunk are wrong due to a cos5 bug:
Passing (arbitrary) IV with sc_set_security_env (and actually being able to compensate for the cos5 bug within the driver) is possible since OpenSC version 0.20.0: It boils down to setting a correct IV vector for n-1 invocations of "7.4.3.7. Symmetric Key Decrypt".
A to-file will be created (potentially replacing any existing) into an existing directory only.

Chronophage windows (using VS 2017) throws an unresolved symbol link error at me, one of the unpleasant ones unknown how to fix that and a google search points to a plethora of directions. It's long ago that I tolerated windows devour my spare dev time.

acos5_gui takes some time for start-up: A lot of card interaction occurs right in the beginning. Once the initial work is done and the GUI is reactive, there is only one other action, that takes remarkable time (freezing the GUI): RSA key generation with high bit sizes. CryptoMate64 takes about 3-5 minutes for a 4096 bit key pair generation and occasionally, the generation even fails. Just retry until that succeeds. The generation is available into either existing files or newly to be created files.

There is no permanent connection to the card from acos5_gui, just on demand, but don't mix usages of acos5_gui (while it's accessing the card) with other card/token usages (that access the card), e.g. by Thunderbird, ssh or alike: I didn't yet investigate how the PKCS#11 library opensc-pkcs11 and the driver behave concerning multi-threading.
With an USB token, card access is visible, but there are also "false" LED messages indicating card access: I assume something isn't perfect within the pcsc-lite layer, because sometimes, when I know the card access from acos5_gui is finished and the LED entered to a blinking state, it may continue to light up permanently without a sensible reason. I'm used to stop that by invoking gscriptor from pcsc-tools, connect, disconnect and quit, possibly repeating that if required.

The regular case should be, that after about 1 minute of inactivity with acos5_gui, the USB LED should stop blinking, signaling it's unpowered state.
While being inactive with acos5_gui (or only actions that don't access the card), any other app may be used that connects to the card. After closing that app, work with acos5_gui may be resumed.
If You access a repo, e.g. GitHub via ssh, it may happen, that git starts to issue Cryptoki calls which ends in accessing the card periodically: That's a strange issue with respect to git-upload-pack. Somehow I managed to stop that.
Also, don't plug-in more than 1 ACOS5 token simultaneously, or unplug or change the token while acos5_gui is running: acos5_gui is not yet designed to handle that (e.g. it memoizes the file system, assuming it's th same when resuming).
The error handling is not complete at this stage: The problem with that is: The coding isn't easily done already and massive error handling code would currently obscure where the real action takes place. If You encounter any such situation, please report to issues.

TODO, to be enhanced: just a dub build on new hardware (3 years inactivity in the meantime 2021-2024) revealed:

Starting Performing "debug" build using /usr/bin/dmd for x86_64.
Building derelict-util 3.0.0-beta.2: building configuration [library]
Building pkcs11 2.40.0-alpha.4: building configuration [derelict]
Building tasn1:wrapper 0.0.7: building configuration [library]
Building acos5_gui 0.0.15+commit.2.g96878eb: building configuration [application]
 Linking acos5_gui

/usr/bin/ld: cannot find -lftgl: No such file or directory /usr/bin/ld: cannot find -l:libopensc.so.7: No such file or directory collect2: error: ld returned 1 exit status Error: linker exited with status 1 cc ... .dub/packages/iup/3.27.0-alpha.2/iup/iup/lib/posix-x86_64 -lcrypto -lssl -lftgl -liup -liupcontrols -l:libopensc.so.7 -ldl -l:libtasn1.so.6 -L/usr/lib/x86_64-linux-gnu -lphobos2 -lpthread -lm -lrt -ldl Error /usr/bin/dmd failed with exit code 1. user@host ...acos5_gui$

So, the only unexpected was the missing libftgl.so from ubuntu package libftgl-dev or ??? Explain how that relates to folder/file /home/user/Downloads/IUP_331/iup-3.31_Linux54_64_lib/ftgl/lib/Linux54_64/libftgl.so, i.e. what to do about libftgl.so ? (and when exactly libftgl.so is needed, where comes the dependancy from?) The other error was expected, as there was OpenSC 0.25.1 installed with libopensc.so.11 (not libopensc.so.7) !

About

D language: An administration tool for driver acos5 https://github.com/carblue/acos5

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages