| Link | Description |
| Readme | Mantis Description and Updates |
| BOM and Acknowledgements | BOM, links to other repositories, acknowledgements |
| Print Orientation | Printing the parts |
| Carriage Assembly | Building the MGN9, MGN12 Carriage, Hotend Mounts |
| Magprobe Assembly | Assembly of Mag Probe |
| Firmware and Slicer Settings | Firmware and Slicer Settings |
| Voron 1.8 and Trident | Notes on Voron 1.8 and Trident |
| Final Assembly | Notes and Pictures of final assembly |
| Usermods | Mods by Mantis Users (note: separate repository) |
| Long's Mantis Repository | Long's Repository for Mantis. Updates and newest stuff will be found here |
Notes for building on a Voron Trident
- Trident is compatible with Mantis using the files for 2.4.
- Thanks to WingZero for testing this.
Notes for building on a Voron 1.8 (NOT trident)
- You will need to cut the rearward “ears” off the 5015 fans for clearance.
- OscarGM was able to get the standard length ducts (found in the 2.4 folder) to clear. It looked tight, but it did clear.
- The ducts in the 1.8 folder have 2mm extra clearance, and should clear with most fans.
- The reason 1.8 needs the ears cut is because the duct start to look ridiculously long due to the inverted nature of the 1.8 gantry.
- Acknowledgements:
- Just wanted to thank GarretWP, OscarGM, and Koonweee for being the brave souls to test and work with me to get it working with 1.8.
 |
 |
| Koonweee’s Voron 1.8 using 2mm extended ducts | OscarGM’s Voron 1.8 with 2.4 ducts (clearance by cutting the 5015 ears) |