Pull

.vscode/settings.json

@@ -0,0 +1,5 @@
+{
+    "githubPullRequests.ignoredPullRequestBranches": [
+        "master"
+    ]
+}

_config.yml

@@ -9,33 +9,36 @@
 # --- Required options --- #
 ############################
 
+# in responsive view, show sidebar toggle button?
+toggle-sidebar-button: true
+
 # Name of website
-title: My Website
+title: Home
 
 # Your name to show in the footer
-author: Some Person
+author: Baltej Giri
 
 ###############################################
 # --- List of links in the navigation bar --- #
 ###############################################
 
 navbar-links:
   About Me: "aboutme"
-  Resources:
-    - Beautiful Jekyll: "https://beautifuljekyll.com"
-    - Learn markdown: "https://www.markdowntutorial.com/"
-  Author's home: "https://deanattali.com"
+  Blogs: "blogs"
+    - Categories:
+      - Networking:
+      - Linux:
 
 ################
 # --- Logo --- #
 ################
 
 # Image to show in the navigation bar - works best with a square image
 # Remove this parameter if you don't want an image in the navbar
-avatar: "/assets/img/avatar-icon.png"
+avatar: "/assets/img/profile_picture_3.jpg"
 
 # By default, the image is cut into a circle. You can disable this behaviour by setting 'round-avatar: false'
-round-avatar: true
+round-avatar: false
 
 # If you want to have an image logo in the top-left corner instead of having the title of the website,
 # then specify the following parameter
@@ -50,16 +53,16 @@ round-avatar: true
 # You can change the order that they show up on the page by changing the order here.
 # Uncomment the links you want to show and add your information to each one.
 social-network-links:
-  email: "[email protected]"
-  rss: true  # remove this line if you don't want to show an RSS link at the bottom
-  facebook: deanattali
-  github: daattali
-  twitter: daattali
-  patreon: DeanAttali
-  youtube: "@daattali"
+  #email: "[email protected]"
+  #rss: true  # remove this line if you don't want to show an RSS link at the bottom
+  linkedin: baltej-giri
+  github: baltejgiri
+  # twitter: giribaltej
+  #patreon: DeanAttali
+  #youtube: "@daattali"
 #  medium: yourname
 #  reddit: yourname
-#  linkedin: daattali
+linkedin: baltej-giri
 #  xing: yourname
 #  stackoverflow: "3943160/daattali"
 #  snapchat: deanat78
@@ -91,13 +94,13 @@ rss-description: This website is a virtual proof that I'm awesome
 # Select which social network share links to show in posts
 share-links-active:
   twitter: true
-  facebook: true
+  facebook: false
   linkedin: true
   vk: false
 
 # How to display the link to your website in the footer
 # Remove this if you don't want a link in the footer
-url-pretty: "MyWebsite.com"
+#url-pretty: "MyWebsite.com"
 
 # Excerpt word length - Truncate the excerpt of each post on the feed page to the specified number of words
 excerpt_length: 50
@@ -109,10 +112,10 @@ feed_show_excerpt: true
 feed_show_tags: true
 
 # Add a search button to the navbar
-post_search: true
+post_search: false
 
 # Add a button in the footer to edit the current page. Only works if your website is hosted on GitHub
-edit_page_button: true
+edit_page_button: false
 
 # Allow sub-menu items (second-level navigation menu items) to be longer than the top-level menu
 # If this setting is off, then long sub-menu words might get cut off
@@ -143,7 +146,7 @@ footer-hover-col: "#0085A1"
 # Alternatively, the navbar, footer, and page background can be set to an image
 # instead of colour
 
-#navbar-img: "/assets/img/bgimage.png"
+navbar-img: "/assets/img/bgimage.png"
 #footer-img: "/assets/img/bgimage.png"
 #page-img: "/assets/img/bgimage.png"
 

_documentations/2024-07-20-Routing using Multilayer and Router on Stick.md

@@ -0,0 +1,174 @@
+---
+layout: page
+title: Routing using Multilayer and Router on Stick..
+subtitle: CCNA Notes
+---
+# cover-img: assets/img/where_am_i.jpg
+# thumbnail-img: /assets/img/thumb.png
+# share-img: /assets/img/path.jpg
+tags: [documents]
+author: Baltej Giri
+---
+---
+
+## LAB Configuration for inter-vlan routing using ROAS, SVI and Routed Ports
+
+### Multi-layer Switch Configuration 
+Mutlilayer Switch configuration with Switch Virtual Interface for VLAN 10 and 11.
+
+- Switch's hostname is set to multilayer-sw1.
+- Interfaces Gig1/2-3 and Gi0/2-3 are configured with access port on vlan 10 and vlan 11 respectively.
+- All access port's are set with port security mode to restric and age timmer with 5 minute along with portfast.
+- To prevent log messages to interpt from CLI enteries, logging synchronous is set.
+- SVI's are created for VLAN 10 and 11 and assigned with ip address.
+- Switch's interface Gig0/0 is set to routed port which connects to Router as a point to point link.
+- Static Route is set to forward traffic destined for networks outside of Local Area Network.
+- IP addresses and port status are verified at last.
+- Connectivity between both VLANs is tested using ping command from a endpoint to another of each vlan.
+- Configuration is saved on multilayer switch at last.
+```
+enable
+configure terminal
+no banner exec
+no banner incoming
+no banner login
+!
+hostname multilayer-sw1
+ip routing
+!
+line con 0
+logging synchronous
+exit
+!
+interface range g1/2-3
+ switchport access vlan 10
+ switchport mode access
+ switchport port-security violation restrict
+ switchport port-security aging time 5
+ spanning-tree portfast
+ !
+interface range g0/2-3
+ switchport access vlan 11
+ switchport mode access
+ switchport port-security violation restrict
+ switchport port-security aging time 5
+ spanning-tree portfast
+ !
+!
+interface vlan 10
+ip address 192.168.10.254 255.255.255.0
+no shutdown
+!
+exit
+interface vlan 11
+ip address 192.168.11.254 255.255.255.0
+no shutdown
+!
+interface gig0/0
+ description link_to_router's_g0/0
+ no switchport
+ ip address 200.10.50.1 255.255.255.252
+ no shutdown
+ !
+ip route 192.168.12.0 255.255.255.0 200.10.50.2
+ip route 192.168.13.0 255.255.255.0 200.10.50.2
+ !
+ end
+ show ip interface brief
+ !
+ show interface status
+ !
+copy running-config startup-config
+
+```
+### Router Configuration
+Router's Gi0/0 port is configured as a point-to-point link with Multi-layer switch and interface Gi0/1 and sub-interfaces Gi0/1.12 and Gi0/1.13 for router on stick.
+
+```
+enable
+configure terminal
+no banner exec
+no banner incoming
+no banner login
+!
+hostname router-1
+!
+line con 0
+logging synchronous
+exit
+interface gig0/0
+ description link_to_multilayer-sw1's_g0/0
+ ip address 200.10.50.2 255.255.255.252
+ no shutdown
+ !
+interface gig0/1
+ description link_to_layer2-sw1's_g0/0
+ no shutdown
+ interface gig0/1.12
+ encapsulation dot1Q 12
+ ip address 192.168.12.254 255.255.255.0
+ no shutdown
+ interface gig0/1.13
+ encapsulation dot1Q 13
+ ip address 192.168.13.254 255.255.255.0
+ no shutdown
+!
+exit
+!
+ip route 192.168.10.0 255.255.255.0 200.10.50.1
+ip route 192.168.11.0 255.255.255.0 200.10.50.1
+end
+!
+show ip int brief
+!
+show running-config
+!
+copy running-config startup-config
+```
+
+### Layer 2 Switch configuration
+Layer 2 switch is configutred with two vlan's 12 and 13, it's gig0/0 port will be a trunk port with vlans 12,13 allowed along with native vlan 1.
+
+```
+enable
+configure terminal
+no banner exec
+no banner incoming
+no banner login
+!
+hostname layer-2-sw1
+!
+line con 0
+logging synchronous
+exit
+!
+interface gig0/3
+ switchport access vlan 12
+ switchport mode access
+ switchport port-security violation restrict
+ switchport port-security aging time 5
+ spanning-tree portfast
+interface gig1/3
+ switchport access vlan 13
+ switchport mode access
+ switchport port-security violation restrict
+ switchport port-security aging time 5
+ spanning-tree portfast
+interface gig0/0
+description link_to_router-1's_g0/1
+switchport trunk encapsulation dot1q
+switchport mode trunk
+switchport trunk allowed vlan 12
+switchport trunk allowed vlan add 13
+switchport trunk native vlan 1
+!
+end
+!
+show vlan brief
+!
+show interface trunk
+!
+show interface status
+!
+
+```