choparp README
$Id$

   Copyright (c) 1997 Takamichi Tateoka ([email protected])
   Copyright (c) 2002 Thomas Quinot ([email protected])

Changes and original English man page from the FreeBSD port by
Jun-ichiro itojun Hagino <[email protected]>.

Changes from the NetBSD package by Darrin B. Jewell <[email protected]>.

choparp is a proxy ARP daemon. It listens for ARP requests on a
network interface, and sends ARP replies with a specified MAC
addresses when the requested IP addresses matches a user-provided
list.

For example, assume following VLSM subnet.  R1 and H1 must have
routing entry for subnet B (172.21.139.32/28).

  +----+                            +----+
  | R1 |                            | H1 |
  +-+--+                            +----+
    | 172.21.139.1                    | 172.21.139.96
    |                                 |
  --+--------+------------------------+--------------- subnet A
             |                                   172.21.139.0/24
             | 172.21.139.2
           +----+
           | R2 |
           +----+
             | 172.21.139.33
             |
       ------+-----------------+---------------------- subnet B
                               |                 172.21.139.32/28
                               | 172.21.139.33
                             +----+
                             | H2 |
                             +----+

If you can not set such routing entry, R1 and H1 treat hosts on the
subnet B as on the subnet A.  In this case, H1 broadcast ARP request
for H2 to send a message for H2.  This request will fail since this
request can not reach to subnet B (and H2), thus H1 cannot tail with
H2.

choparp running on R2 replies for ARP request, which is looking for
MAC address of H2, as R2 is H2 on subnet A.  Hosts on subnet A send
packets for H2 to R2 (because R2 replies H2 is R2), and R2 can forward
the packets to R2 with ordinary way.  As a result, H1 and H2 can talk
each other.  You can *chop* subnet B from subnet A without any routing
modification on subnet A.

This is a same way as proxy ARP described in RFC1027.

For above example, you should run choparp on R2, set if_name parameter
as the interface on 172.21.139.2, network parameter as
172.21.139.32/255.255.255.240 (or 172.21.139.32/28).  You should not
use 172.21.139.32 and 172.21.139.47 as IP address for hosts because
they are used as network address and broadcast address for subnet B.

Enjoy!

/*
   choparp - cheap & omitted proxy arp

   Copyright (c) 1997 Takamichi Tateoka ([email protected])
   Copyright (c) 2002 Thomas Quinot ([email protected])
   
   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions
   are met:
   1. Redistributions of source code must retain the above copyright
      notice, this list of conditions and the following disclaimer.
   2. Redistributions in binary form must reproduce the above copyright
      notice, this list of conditions and the following disclaimer in the
      documentation and/or other materials provided with the distribution.
   3. Neither the name of the authors nor the names of their contributors
      may be used to endorse or promote products derived from this software
      without specific prior written permission.
   
   THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
   ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
   ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
   FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
   OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
   OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
   SUCH DAMAGE.
*/