BMW i Remote API

A reverse engineered interface for the BMW i3 Electric Car, created initially by Terence Eden, with some code modified by Quentin Stafford-Fraser.

Description

These API calls are designed to allow you to interact with your BMW i3. They were reverse engineered from the official BMW i Remote Android app.

Your use of these API calls is entirely at your own risk. They are neither officially provided nor sanctioned.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

• Servers
• Authorisation
• API
  • Get Vehicle Data
    • Response
    • Values
  • Get Last Trip
    • Response
    • Values
  • Get Charging Times
    • Response
    • Values
  • Get Vehicle Destinations
    • Response
    • Values
  • Get All Trip Details
    • Response
    • Values
  • Get Range Map
    • Response
    • Values
  • Get misc SoC data
    • Response
    • Values
• Sending information to the car
  • Get Request status
    • Response
    • Values
  • POST a command
    • Available Commands
    • Initiate Charging
    • Start Climate Control
    • Lock the doors
    • Unlock the doors
    • Flash the headlights
    • Charging Schedule
    • Vehicle Finder
    • Response
  • Send POI
    • Body
    • Response
• What's Next?

Servers

There are three API servers.

• https://b2vapi.bmwgroup.cn:8592 China
• https://b2vapi.bmwgroup.us USA
• https://b2vapi.bmwgroup.com Europe / Rest of World

Authorisation

In order to authenticate against the API you will need to be registered on BMW's Connected Drive service.

You will need:

1. Your ConnectedDrive registered email address.
2. Your ConnectedDrive registered password.
3. The i Remote API Key.
4. The i Remote API Secret.

You can get the i Remote details from either decompiling the Android App or from intercepting communications between your phone and the BMW server. This is left as an exercise for the reader ☺

Firstly, we use Basic authentication. That means taking the API Key and Secret and Base64 encoding them.

So key:secret becomes a2V5OnNlY3JldA==

We also need to send the following parameters as

• Content-Type: application/x-www-form-urlencoded

 grant_type=password
&username=whatever%40example.com
&password=p4ssw0rd
&scope=remote_services+vehicle_data

Here's how to do it with curl:

curl \
   -H "Authorization: Basic a2V5OnNlY3JldA==" \
   -H "Content-Type: application/x-www-form-urlencoded" \
   -d "grant_type=password&username=whatever%40example.com&password=p4ssw0rd&scope=remote_services+vehicle_data" \
   "https://b2vapi.bmwgroup.com/webapi/oauth/token/"

If everything has worked, you should get back the following JSON:

{
  "access_token": "RCQ1hLP4AFaUBW9BjcPUN3i4WgkwF90R",
  "token_type": "Bearer",
  "expires_in": 28800,
  "refresh_token": "7WgKmEJ2kD1ydl9Hefp01eS8qDGzKnzjeORpA6vtsoFIEanz",
  "scope": "vehicle_data remote_services"
}

You must include

• Authorization: Bearer RCQ1hLP4AFaUBW9BjcPUN3i4WgkwF90R

in your headers with every request.

The expires_in is in seconds - giving you 8 hours before you have to renew the token.

I've no idea what the refresh_token is for. Once the access_token expires, you can simply re-authenticate and gain a new one.

API

You must include

• Authorization: Bearer RCQ1hLP4AFaUBW9BjcPUN3i4WgkwF90R

in your headers with every request.

Get Vehicle Data

• /webapi/v1/user/vehicles/
  • Remember to include the Authorization: Bearer header.

Response

Returns a list of entries, one per registered vehicle.

[
  {
    "remote360": "NOT_SUPPORTED",
    "chargingControl": "WEEKLY_PLANNER",
    "countryCode": "V1-UK",
    "hornBlow": "NOT_SUPPORTED",
    "brand": "BMW_I",
    "smartSolution": "NOT_SUPPORTED",
    "hasAlarmSystem": true,
    "climateControl": "NOT_SUPPORTED",
    "doorUnlock": "ACTIVATED",
    "rangeMap": "RANGE_POLYGON",
    "climateFunction": "AIRCONDITIONING",
    "lscType": "I_LSC_IMM",
    "hub": "HUB_ECE",
    "statisticsAvailable": true,
    "doorLock": "ACTIVATED",
    "intermodalRouting": "AVAILABLE",
    "model": "I3 +REX",
    "vehicleFinder": "ACTIVATED",
    "color": "SOLARORANGE MET. M. AKZE",
    "vin": "WAB1C23456V123456",
    "bodytype": "I01",
    "chargeNow": "NOT_SUPPORTED",
    "supportedChargingModes": [
      "AC_LOW",
      "AC_HIGH",
      "DC"
    ],
    "sendPoi": "ACTIVATED",
    "yearOfConstruction": 2014,
    "climateNow": "ACTIVATED",
    "lightFlash": "ACTIVATED",
    "driveTrain": "BEV_REX",
    "licensePlate": "AB64 1BC",
    "statisticsCommunityEnabled": true,
    "colorCode": "B78",
    "onlineSearchMode": "MAP",
    "dealer": {
      "name": "BMW UK Ltd",
      "country": "GB",
      "postalCode": "GU14 0FB",
      "city": "Farnborough",
      "street": "Summit ONE"
    },
    "lastDestinations": "SUPPORTED"
  }
]

The most important thing here is the VIN - Vehicle Identification Number. You'll need that for all the other API calls as well as the Authorization Bearer.

Get Vehicle Status

• /webapi/v1/user/vehicles/:VIN/status
  • Where :VIN is your vehicle's VIN.
  • Remember to include the Authorization: Bearer header.

Response

{
    "vehicleStatus": {
        "vin": "WAB1C23456V123456",
        "mileage": 1234,
        "updateReason": "VEHICLE_SHUTDOWN_SECURED",
        "updateTime": "2015-10-30T18:45:04+0100",
        "doorDriverFront": "CLOSED",
        "doorDriverRear": "CLOSED",
        "doorPassengerFront": "CLOSED",
        "doorPassengerRear": "CLOSED",
        "windowDriverFront": "CLOSED",
        "windowDriverRear": "CLOSED",
        "windowPassengerFront": "CLOSED",
        "windowPassengerRear": "CLOSED",
        "trunk": "CLOSED",
        "rearWindow": "INVALID",
        "convertibleRoofState": "INVALID",
        "hood": "CLOSED",
        "doorLockState": "SECURED",
        "parkingLight": "OFF",
        "positionLight": "OFF",
        "remainingFuel": 8.9,
        "remainingRangeElectric": 73,
        "remainingRangeElectricMls": 45,
        "remainingRangeFuel": 126,
        "remainingRangeFuelMls": 78,
        "maxRangeElectric": 134,
        "maxRangeElectricMls": 83,
        "fuelPercent": 99,
        "maxFuel": 9,
        "connectionStatus": "DISCONNECTED",
        "chargingStatus": "INVALID",
        "chargingLevelHv": 58,
        "lastChargingEndReason": "UNKNOWN",
        "lastChargingEndResult": "FAILED",
        "position": {
            "lat": 51.123456,
            "lon": -1.2345678,
            "heading": 211,
            "status": "OK"
        },
        "chargingTimeRemaining": 45,
        "internalDataTimeUTC": "2015-10-30T18:47:44"
    }
}

Values

• mileage is in Km.
• remainingFuel is in Litres.
• maxRangeElectric is in Km.
• maxRangeElectricMls is in miles.
• chargingLevelHv is the percentage of charge left in the (High voltage?) battery.
• maxFuel is in Litres.
• heading is in degrees.
• chargingTimeRemaining is in minutes. Please mind that this value is only available if car is actively charging otherwise it is not present in the response.

Valid chargingStatus values appear to be:

• CHARGING
• ERROR
• FINISHED_FULLY_CHARGED
• FINISHED_NOT_FULL
• INVALID
• NOT_CHARGING
• WAITING_FOR_CHARGING

Valid connectionStatus values appear to be:

• CHARGING_DONE
• CHARGING_INTERRUPED [sic]
• CHARGING_PAUSED
• CHARGIN_STARTED [sic] TYPO should be CHARGING_STARTED
• CYCLIC_RECHARGING
• DISCONNECTED
• DOOR_STATE_CHANGED
• NO_CYCLIC_RECHARGING
• NO_LSC_TRIGGER
• ON_DEMAND
• PREDICTION_UPDATE
• TEMPORARY_POWER_SUPPLY_FAILURE
• UNKNOWN
• VEHICLE_MOVING
• VEHICLE_SECURED
• VEHICLE_SHUTDOWN
• VEHICLE_SHUTDOWN_SECURED
• VEHICLE_UNSECURED

Valid doorLockState values appear to be:

• UNLOCKED
• LOCKED (remotely)
• SECURED (with key fob)

Get Last Trip

Shows the details about your most recent trip.

• /webapi/v1/user/vehicles/:VIN/statistics/lastTrip
  • Where :VIN is your vehicle's VIN.
  • Remember to include the Authorization: Bearer header.

Response

{
   "lastTrip":{
      "efficiencyValue":0.53,
      "totalDistance":141,
      "electricDistance":100.1,
      "avgElectricConsumption":16.6,
      "avgRecuperation":2,
      "drivingModeValue":0,
      "accelerationValue":0.39,
      "anticipationValue":0.81,
      "totalConsumptionValue":0.79,
      "auxiliaryConsumptionValue":0.66,
      "avgCombinedConsumption":1.9,
      "electricDistanceRatio":71,
      "savedFuel":0,
      "date":"2015-12-01T20:44:00+0100",
      "duration":124
   }
}

Values

Distances appear to be in Kilometres rather than miles, so be sure to adjust accordingly. Multiply by 0.621371 to get miles.

• totalDistance is in Km.
• electricDistance is in Km.
• avgElectricConsumption is in kWh/100Km.
• avgRecuperation is in kWh/100Km.
• duration is in minutes.

To convert kWh/100Km to Miles/kWh.

1 / (0.01609344 * avgElectricConsumption)

Get Charging Times

Shows when the car is scheduled to charge.

• /webapi/v1/user/vehicles/:VIN/chargingprofile
  • Where :VIN is your vehicle's VIN.
  • Remember to include the Authorization: Bearer header.

Response

{
   "weeklyPlanner":{
      "climatizationEnabled":true,
      "chargingMode":"DELAYED_CHARGING",
      "chargingPreferences":"CHARGING_WINDOW",
      "timer1":{
         "departureTime":"07:30",
         "timerEnabled":true,
         "weekdays":[
            "MONDAY"
         ]
      },
      "timer2":{
         "departureTime":"13:00",
         "timerEnabled":false,
         "weekdays":[
            "SATURDAY"
         ]
      },
      "timer3":{
         "departureTime":"08:00",
         "timerEnabled":false,
         "weekdays":[

         ]
      },
      "overrideTimer":{
         "departureTime":"07:30",
         "timerEnabled":false,
         "weekdays":[
            "MONDAY"
         ]
      },
      "preferredChargingWindow":{
         "enabled":true,
         "startTime":"05:02",
         "endTime":"17:31"
      }
   }
}

Values

• departureTime appears to be the car's local time.

Get Vehicle Destinations

Shows the destinations you've previously sent to the car.

• /webapi/v1/user/vehicles/:VIN/destinations
  • Where :VIN is your vehicle's VIN.
  • Remember to include the Authorization: Bearer header.

Response

{
   "destinations":[
      {
         "lat":51.53053283691406,
         "lon":-0.08362331241369247,
         "country":"UNITED KINGDOM",
         "city":"LONDON",
         "street":"PITFIELD STREET",
         "type":"DESTINATION",
         "createdAt":"2015-09-25T08:06:11+0200"
      }
   ]
}

Values

• An array of locations.

Get All Trip Details

Shows the statistics for all trips taken in the vehicle.

• /webapi/v1/user/vehicles/:VIN/statistics/allTrips
  • Where :VIN is your vehicle's VIN.
  • Remember to include the Authorization: Bearer header.

Response

{
    "allTrips": {
        "avgElectricConsumption": {
            "communityLow": 0,
            "communityAverage": 16.33,
            "communityHigh": 35.53,
            "userAverage": 14.76
        },
        "avgRecuperation": {
            "communityLow": 0,
            "communityAverage": 3.76,
            "communityHigh": 14.03,
            "userAverage": 2.3
        },
        "chargecycleRange": {
            "communityAverage": 121.58,
            "communityHigh": 200,
            "userAverage": 72.62,
            "userHigh": 135,
            "userCurrentChargeCycle": 60
        },
        "totalElectricDistance": {
            "communityLow": 1,
            "communityAverage": 12293.65,
            "communityHigh": 77533.6,
            "userTotal": 3158.66
        },
        "avgCombinedConsumption": {
            "communityLow": 0,
            "communityAverage": 1.21,
            "communityHigh": 6.2,
            "userAverage": 0.36
        },
        "batterySizeMax": 35820,
        "savedCO2": 87.58,
        "savedCO2greenEnergy": 515.177,
        "totalSavedFuel": 0,
        "resetDate": "1970-01-01T01:00:00+0100"
    }
}

Values

• chargecycleRange is in Km.
• totalElectricDistance is in Km.
• savedCO2 is in kg.
• savedCO2greenEnergy is in kg.
• batterySizeMaxis in Wh.

I'm not sure what units of the other values are.

Get Range Map

Generate a polyline displaying the predicted range of the vehicle.

• /webapi/v1/user/vehicles/:VIN/rangemap
  • Where :VIN is your vehicle's VIN.
  • Remember to include the Authorization: Bearer header.

Response

{
    "rangemap": {
        "center": {
            "lat": 51.123456,
            "lon": -1.2345678
        },
        "quality": "AVERAGE",
        "rangemaps": [
            {
                "type": "ECO_PRO_PLUS",
                "polyline": [
                    {
                        "lat": 51.6991281509399,
                        "lon": -2.00423240661621
                    },
                    {
                        "lat": 51.6909098625183,
                        "lon": -1.91526889801025
                    },
                    ...
                ]
            },
            {
                "type": "COMFORT",
                "polyline": [
                    {
                        "lat": 51.7212295532227,
                        "lon": -1.7363977432251
                    },
                    {
                        "lat": 51.6991496086121,
                        "lon": -1.73077583312988
                    },
                    ...
                ]
            }
        ]
    }
}

Values

• ECO_PRO_PLUS driving using the efficient Eco mode.
• COMFORT driving using comfort mode.

Get misc SoC Data

Get maximum state of charge of your battery and some redundant data.

The URL is different from the other API servers:

• https://www.bmw-connecteddrive.de/api/vehicle/navigation/v1/VIN
  • Where VIN is your vehicle's VIN.
  • Use the same Authorization: Bearer header as with API Server

Response

example data from a PHEV:
{
  "latitude" : 62.250584,
  "longitude" : 3.7717776,
  "isoCountryCode" : "DEU",
  "auxPowerRegular" : 1.4,
  "auxPowerEcoPro" : 1.2,
  "auxPowerEcoProPlus" : 0.4,
  "soc" : 4.019000053405762,
  "socMax" : 5.6,
  "eco" : "1c94,1206,d9d,d0f,cd3,cf9,e2d,f49,10ec,10ec,117c",
  "norm" : "1e15,12f9,e54,dbf,d82,da7,eed,1017,11d0,1483,19a9",
  "ecoEv" : "c31,799,5c5,5a5,5ae,5fc,6fb,861,9df,9df,9df",
  "normEv" : "cd5,800,613,5f1,5fc,64c,759,8d2,a65,bf8,e7d",
  "vehicleMass" : "1560",
  "kAccReg" : "1440000",
  "kDecReg" : "3420000",
  "kAccEco" : "1548000",
  "kDecEco" : "3240000",
  "kUp" : "1800000",
  "kDown" : "2700000",
  "driveTrain" : "phev_otto",
  "pendingUpdate" : false,
  "vehicleTracking" : true
}

Values

• socMax current maximum charge. kind of health check of you battery

Sending information to the car

Sending information to the car is slightly complicated.

Your app communicates with the API, the API then communicates with the car's 3G modem, then you have to wait for a response.

If your car is in poor coverage, you can expect significant latency. Often much higher than a typical timeout will allow for.

At a basic level, you can just send a request - for example to lock the doors, or set off-peak charging.

Get Request status

Shows the status of a POSTed request

• /webapi/v1/user/vehicles/:VIN/serviceExecutionStatus?serviceType=:SERVICE
  • Where :VIN is your vehicle's VIN.
  • Remember to include the Authorization: Bearer header.

Response

{
   "executionStatus":{
      "serviceType":"DOOR_LOCK",
      "status":"EXECUTED",
      "eventId":"[email protected]"
   }
}

Values

Valid statuses are:

• DELIVERED
• EXECUTED
• INITIATED
• NOT_EXECUTED
• PENDING
• TIMED_OUT

The following are valid :SERVICE types, but may not be supported by your vehicle.

• CHARGE_NOW
• CHARGING_CONTROL
• CLIMATE_CONTROL
• CLIMATE_NOW
• DOOR_LOCK
• DOOR_UNLOCK
• GET_ALL_IMAGES
• GET_PASSWORD_RESET_INFO
• GET_VEHICLES
• GET_VEHICLE_IMAGE
• GET_VEHICLE_STATUS
• HORN_BLOW
  • This is disabled in the UK market. It may be possible to enable this by registering on the German ConnectedDrive service.
  • NOTE The UK Highway Code says you may not use the horn unless moving (Rule 112).
• LIGHT_FLASH
• LOCAL_SEARCH
• LOCAL_SEARCH_SUGGESTIONS
• LOGIN
• LOGOUT
• SEND_POI_TO_CAR
• VEHICLE_FINDER

POST a command

Instructs the car to perform an action.

• /webapi/v1/user/vehicles/:VIN/executeService
  • Where :VIN is your vehicle's VIN.
  • Remember to include the Authorization: Bearer header.

Available Commands

These commands are all available via the API, but may not be supported by your vehicle.

These are just what I've discovered so far.

Data must be POSTed to the server.

Initiate Charging

If the vehicle is plugged in, but not charging (due to an off peak setting?) it is possible to force the car to charge.

• serviceType=CHARGE_NOW

Start Climate Control

This will activate climate control within your vehicle.

It appears to be limited to the last temperature you set when you were in the car. I can't find a way to instruct the car to reach a specific temperature.

• serviceType=CLIMATE_NOW

Lock the doors

Performs central locking.

• serviceType=DOOR_LOCK

Unlock the doors

This will unlock all the doors on your vehicle.

Please use extreme caution when sending this command. Ensure that you are in sight of the vehicle and are able to lock it if needed.

• serviceType=DOOR_UNLOCK

If you recievce an error after DOOR_UNLOCK that looks like {"error":{"code":500,"description":"(SmartPhoneUtil-A-2013) Action is forbidden. secretKnowledge is missing but required!"}}

An addition field must be included

• serviceType=DOOR_UNLOCK
• bmwSkAnswer=BMW_ACCOUNT_SECURITY_QUESTION_ANSWER

Flash the headlights

If you can't find the vehicle, or need to illuminate something in its vicinity, you can briefly activate the headlights.

• serviceType=LIGHT_FLASH&count=2
  • I assume that count relates to the number of seconds to keep the light on?

Charging Schedule

Set the peak / off peak charging schedule.

• serviceType=CHARGING_CONTROL
  • Additional data needs to be sent as parameter data in JSON format. The data itself is the same as returned by Get Charging Times.

# Notes:
# - Linebreaks for "data" have been added for readability only.
curl -i \
  -X POST \
  -H "Content-Type: application/x-www-form-urlencode" \
  --data-urlencode 'serviceType=CHARGING_CONTROL' \
  --data-urlencode 'data={
    "weeklyPlanner":
      {
        "climatizationEnabled": true,
        "chargingMode": "IMMEDIATE_CHARGING",
        "chargingPreferences": "CHARGING_WINDOW",
        "timer1":{
          "departureTime": "12:30",
          "timerEnabled": true,
          "weekdays": []
        },
        "timer2":{
          "weekdays": []
        },
        "timer3":{
          "departureTime": "19:30",
          "timerEnabled": false,
          "weekdays": []
        },
        "overrideTimer": {
          "weekdays": []
        },
        "preferredChargingWindow": {
          "enabled": false,
          "startTime": "00:00",
          "endTime": "00:00"
        }}}' \
  https://b2vapi.bmwgroup.com/webapi/v1/user/vehicles/:VIN/executeService

* Instead of `weeklyPlanner` `twoTimesTimer` can be used. 

# Notes:
# - Linebreaks for "data" have been added for readability only.
curl -i \
  -X POST \
  -H "Content-Type: application/x-www-form-urlencode" \
  --data-urlencode 'serviceType=CHARGING_CONTROL' \
  --data-urlencode 'data={
    "twoTimesTimer":
      {
        "climatizationEnabled": true,
        "chargingMode": "DELAYED_CHARGING",
        "chargingPreferences": "CHARGING_WINDOW",
        "timer1":{
          "departureTime": "12:30",
          "timerEnabled": true,
        },
        "timer2":{
          "departureTime": "13:30",
          "timerEnabled": false,
        },
        "preferredChargingWindow": {
          "startTime": "00:00",
          "endTime": "00:00"
        }}}' \
  https://b2vapi.bmwgroup.com/webapi/v1/user/vehicles/:VIN/executeService

Vehicle Finder

• serviceType=VEHICLE_FINDER
  • I'm not sure what this does.

Response

An example response for all POST commands:

{
    "executionStatus": {
        "serviceType": "LIGHT_FLASH",
        "status": "INITIATED",
        "eventId": "[email protected]"
    }
}

Send POI

Sending a POI to the car.

• POST /webapi/v1/user/vehicles/:VIN/sendpoi
  • Where :VIN is your vehicle's VIN.
  • Remember to include the Authorization: Bearer header.
  • Remember to include the Content-Type: application/x-www-form-urlencode header.

Body

body={
	"poi": {
		"city": "abc",
		"lat": nn.nnn,
		"lon": nn.nnn,
		"name": "name",
		"rating": -1,
		"postalCode": "12345",
		"street": "Musterstr. 6"
	}
}

Response

HTTP 204

What's Next?

Using these commands you should be able to replicate the functionality of the official app.

If you spot any errors or omissions, please raise an issue or send a Pull Request.