RAK811 BreakBoard （For RAK811 TrackerBoard and RAK811 SensorNodeBoard）

• chip: LoRaWAN (RAK811) + GPS (MAX-7Q) + MEMS (LIS3DH) + charge battery (BQ23210)
• Support CoIDE/Keil5
• Base on semtech LoRaWAN1.0.2
• Support for Makefile and the gcc-arm-none-eabi toolchain under linux

For the hardware documentation, please check http://www.rakwireless.com/en/download

Building on Ubuntu

Installing the toolchain

In order to be able to compile for the STM32, you need to install the appropriate toolchain. There is a PPA with the gcc-arm-none-eabi toolchain (https://launchpad.net/~team-gcc-arm-embedded/+archive/ubuntu/ppa).

sudo add-apt-repository ppa:team-gcc-arm-embedded/ppa
sudo apt update
sudo apt install gcc-arm-none-eabi

Starting with Ubuntu 18.04LTS, sudo apt update is not necessary anymore, as it will be done automaticaly upon adding the PPA.

Building the project

• clone the project from github: git clone https://github.com/eiten/RAK811_BreakBoard.git
• cd into the project folder: cd RAK811_BreakBoard
• Adjust the settings for your LoRaWAN network (eg nano ./src/apps/classA/Commissioning.h)
• compile: make