Added support for Bongo69 platform

ESPixelStick/src/GPIO_Defs.hpp

@@ -112,6 +112,8 @@ typedef enum
 #   include "platformDefinitions/GPIO_Defs_ESP32_QUINLED_UNO_ETH_ESPSV3.hpp"
 #elif defined (BOARD_ESP32_TTGO_T8)
 #   include "platformDefinitions/GPIO_Defs_ESP32_TTGO_T8.hpp"
+#elif defined (BOARD_ESP32_BONGO69)
+#   include "platformDefinitions/GPIO_Defs_ESP32_Bongo69.hpp"
 #elif defined (BOARD_ESP32_WT32ETH01)
 #   include "platformDefinitions/GPIO_Defs_ESP32_WT32ETH01.hpp"
 #elif defined (BOARD_ESP32_WT32ETH01_WASATCH)

ESPixelStick/src/platformDefinitions/GPIO_Defs_ESP32_Bongo69.hpp

@@ -0,0 +1,93 @@
+#pragma once
+/*
+* GPIO_Defs_ESP32_Bongo69.hpp - Output Management class
+*
+* Project: ESPixelStick - An ESP8266 / ESP32 and E1.31 based pixel driver
+* Copyright (c) 2021 Shelby Merrick
+* http://www.forkineye.com
+*
+*  This program is provided free for you to use in any way that you wish,
+*  subject to the laws and regulations where you are using it.  Due diligence
+*  is strongly suggested before using this code.  Please give credit where due.
+*
+*  The Author makes no warranty of any kind, express or implied, with regard
+*  to this program or the documentation contained in this document.  The
+*  Author shall not be liable in any event for incidental or consequential
+*  damages in connection with, or arising out of, the furnishing, performance
+*  or use of these programs.
+*
+*/
+
+#define SUPPORT_ETHERNET
+
+//Output Manager
+#define DEFAULT_RMT_0_GPIO      gpio_num_t::GPIO_NUM_1
+#define DEFAULT_RMT_1_GPIO      gpio_num_t::GPIO_NUM_2
+#define DEFAULT_RMT_2_GPIO      gpio_num_t::GPIO_NUM_3
+#define DEFAULT_RMT_3_GPIO      gpio_num_t::GPIO_NUM_4
+#define DEFAULT_RMT_4_GPIO      gpio_num_t::GPIO_NUM_5
+#define DEFAULT_RMT_5_GPIO      gpio_num_t::GPIO_NUM_12
+#define DEFAULT_RMT_6_GPIO      gpio_num_t::GPIO_NUM_14
+#define DEFAULT_RMT_7_GPIO      gpio_num_t::GPIO_NUM_15
+
+// #   define SUPPORT_SPI_OUTPUT
+// #define DEFAULT_SPI_DATA_GPIO  gpio_num_t::GPIO_NUM_15
+// #define DEFAULT_SPI_CLOCK_GPIO gpio_num_t::GPIO_NUM_25
+
+#define DEFAULT_I2C_SDA         gpio_num_t::GPIO_NUM_21
+#define DEFAULT_I2C_SCL         gpio_num_t::GPIO_NUM_22
+
+// File Manager
+// #define SUPPORT_SD
+#define SD_CARD_MISO_PIN        gpio_num_t::GPIO_NUM_12
+#define SD_CARD_MOSI_PIN        gpio_num_t::GPIO_NUM_13
+#define SD_CARD_CLK_PIN         gpio_num_t::GPIO_NUM_14
+#define SD_CARD_CS_PIN          gpio_num_t::GPIO_NUM_15
+
+#include <ETH.h>
+
+
+/*
+   * ETH_CLOCK_GPIO0_IN   - default: external clock from crystal oscillator
+   * ETH_CLOCK_GPIO0_OUT  - 50MHz clock from internal APLL output on GPIO0 - possibly an inverter is needed for LAN8720
+   * ETH_CLOCK_GPIO16_OUT - 50MHz clock from internal APLL output on GPIO16 - possibly an inverter is needed for LAN8720
+   * ETH_CLOCK_GPIO17_OUT - 50MHz clock from internal APLL inverted output on GPIO17 - tested with LAN8720
+*/
+#define DEFAULT_ETH_CLK_MODE           eth_clock_mode_t::ETH_CLOCK_GPIO17_OUT
+
+// Pin# of the enable signal for the external crystal oscillator (-1 to disable for internal APLL source)
+#define DEFAULT_ETH_POWER_PIN          gpio_num_t::GPIO_NUM_16
+#define ETH_POWER_PIN                  DEFAULT_ETH_POWER_PIN
+#define DEFAULT_ETH_POWER_PIN_ACTIVE   HIGH
+
+// Type of the Ethernet PHY (LAN8720 or TLK110)
+#define DEFAULT_ETH_TYPE               eth_phy_type_t::ETH_PHY_LAN8720
+
+// I2C-address of Ethernet PHY (0 or 1 for LAN8720, 31 for TLK110)
+#define ETH_ADDR_PHY_LAN8720           1
+
+#define DEFAULT_ETH_ADDR               ETH_ADDR_PHY_LAN8720
+#define DEFAULT_ETH_TXEN               gpio_num_t::GPIO_NUM_21
+#define DEFAULT_ETH_TXD0               gpio_num_t::GPIO_NUM_19
+#define DEFAULT_ETH_TXD1               gpio_num_t::GPIO_NUM_22
+#define DEFAULT_ETH_CRSDV              gpio_num_t::GPIO_NUM_27
+#define DEFAULT_ETH_RXD0               gpio_num_t::GPIO_NUM_25
+#define DEFAULT_ETH_RXD1               gpio_num_t::GPIO_NUM_26
+#define DEFAULT_ETH_MDC_PIN            gpio_num_t::GPIO_NUM_23
+#define DEFAULT_ETH_MDIO_PIN           gpio_num_t::GPIO_NUM_18
+
+// Output Types
+// Not Finished - #define SUPPORT_OutputType_TLS3001
+// #define SUPPORT_OutputType_APA102         // SPI
+#define SUPPORT_OutputType_DMX            // UART
+#define SUPPORT_OutputType_GECE           // UART
+#define SUPPORT_OutputType_GS8208         // UART / RMT
+#define SUPPORT_OutputType_Renard         // UART
+#define SUPPORT_OutputType_Serial         // UART
+#define SUPPORT_OutputType_TM1814         // UART / RMT
+#define SUPPORT_OutputType_UCS1903        // UART / RMT
+#define SUPPORT_OutputType_UCS8903        // UART / RMT
+// #define SUPPORT_OutputType_WS2801         // SPI
+#define SUPPORT_OutputType_WS2811         // UART / RMT
+#define SUPPORT_OutputType_Relay          // GPIO
+// #define SUPPORT_OutputType_Servo_PCA9685  // I2C (default pins)

dist/firmware/firmware.json

@@ -339,6 +339,41 @@
                 "offset": "0x3B0000"
             }
         },
+        {
+            "name": "ESP32 BONGO 69",
+            "description": "ESP32 8 port eth controller",
+            "chip": "esp32",
+            "appbin": "esp32/esp32_bongo69-app.bin",
+            "esptool": {
+                "baudrate": "460800",
+                "options": "--before default_reset --after hard_reset",
+                "flashcmd": "write_flash -z"
+            },
+            "binfiles": [
+                {
+                    "name": "esp32/esp32_bongo69-bootloader.bin",
+                    "offset": "0x1000"
+                },
+                {
+                    "name": "esp32/esp32_bongo-partitions.bin",
+                    "offset": "0x8000"
+                },
+                {
+                    "name": "esp32/boot_app0.bin",
+                    "offset": "0xe000"
+                },
+                {
+                    "name": "esp32/esp32_bongo69-app.bin",
+                    "offset": "0x10000"
+                }
+            ],
+            "filesystem": {
+                "page": "256",
+                "block": "4096",
+                "size": "0x50000",
+                "offset": "0x3B0000"
+            }
+        },
         {
             "name": "ESP32 WTEth 01",
             "description": "ESP32 for DIY builds",

platformio.ini

@@ -4,7 +4,7 @@
 ; Local configuration should be done in platformio_user.ini
 
 [platformio]
-default_envs = espsv3, d1_mini, d1_mini_pro, d32_pro, d32_pro_eth, esp32_cam, esp32_ttgo_t8, d1_mini32, d1_mini32_eth, esp32_wt32eth01, esp32_quinled_quad, esp32_quinled_quad_ae_plus, esp32_quinled_quad_ae_plus_8, esp32_quinled_quad_eth, esp32_quinled_uno, esp32_quinled_uno_ae_plus, esp32_quinled_uno_eth, esp32_quinled_dig_octa, esp01s, d1_mini_mhetesp32minikit, olimex_esp32_gw, d1_mini_twilightlord, d1_mini_twilightlord_eth, esp32_devkitc, esp32_quinled_uno_eth_espsv3, esp32_quinled_uno_espsv3, m5stack_atom, esp3deuxquatro_dmx, esp32_wasatch
+default_envs = espsv3, d1_mini, d1_mini_pro, d32_pro, d32_pro_eth, esp32_cam, esp32_ttgo_t8, d1_mini32, d1_mini32_eth, esp32_bongo69, esp32_wt32eth01, esp32_quinled_quad, esp32_quinled_quad_ae_plus, esp32_quinled_quad_ae_plus_8, esp32_quinled_quad_eth, esp32_quinled_uno, esp32_quinled_uno_ae_plus, esp32_quinled_uno_eth, esp32_quinled_dig_octa, esp01s, d1_mini_mhetesp32minikit, olimex_esp32_gw, d1_mini_twilightlord, d1_mini_twilightlord_eth, esp32_devkitc, esp32_quinled_uno_eth_espsv3, esp32_quinled_uno_espsv3, m5stack_atom, esp3deuxquatro_dmx, esp32_wasatch
 src_dir = ./ESPixelStick
 data_dir = ./ESPixelStick/data
 build_cache_dir = ./.pio/.buildcache
@@ -236,6 +236,16 @@ build_flags =
     -D BOARD_ESP32_WT32ETH01
     -I ./.pio/packages/framework-arduinoespressif32/libraries/Ethernet/src
 
+; BONGO69
+[env:esp32_bongo69]
+extends = esp32git
+board = esp32dev
+build_flags =
+    ${esp32git.build_flags}
+    -D BOARD_NAME='"esp32_bongo69"'
+    -D BOARD_ESP32_BONGO69
+    -I ./.pio/packages/framework-arduinoespressif32/libraries/Ethernet/src
+
 [env:esp32_quinled_dig_octa]
 extends = esp32git
 board = wemos_d1_mini32