Deployed 4728600 with MkDocs version: 1.6.0

de/troubleshooting.html

@@ -258,6 +258,7 @@ <h2 id="cannot-read-any-parameters-device-family-is-0">Cannot read any parameter
 <h2 id="no-data-even-though-the-adapters-red-led-is-on">No data even though the adapter's red LED is on</h2>
 <ul>
 <li>Make sure the adapter is connected to CL+/CL- and not to the third (G+) pin: G+ will drive the LED, but it's not a data line.</li>
+<li>Make sure you have powered on the microcontroller. You may think that the heating system powers the microcontroller because the LED on the BSB-LAN adapter is on, but it doesn't. You need to power it separately.</li>
 <li>With the adapter for the Olimex microcontrollers: Make sure that the BSB-LAN adapter board sits <strong>exactly</strong> in the center of the UEXT connector. It will still fit in, if it's shifted one pin left or right, but it won't work.</li>
 <li>Make sure the RX/TX pins are set/detected correctly.</li>
 </ul>

fr/troubleshooting.html

@@ -258,6 +258,7 @@ <h2 id="cannot-read-any-parameters-device-family-is-0">Cannot read any parameter
 <h2 id="no-data-even-though-the-adapters-red-led-is-on">No data even though the adapter's red LED is on</h2>
 <ul>
 <li>Make sure the adapter is connected to CL+/CL- and not to the third (G+) pin: G+ will drive the LED, but it's not a data line.</li>
+<li>Make sure you have powered on the microcontroller. You may think that the heating system powers the microcontroller because the LED on the BSB-LAN adapter is on, but it doesn't. You need to power it separately.</li>
 <li>With the adapter for the Olimex microcontrollers: Make sure that the BSB-LAN adapter board sits <strong>exactly</strong> in the center of the UEXT connector. It will still fit in, if it's shifted one pin left or right, but it won't work.</li>
 <li>Make sure the RX/TX pins are set/detected correctly.</li>
 </ul>

index.html

@@ -264,5 +264,5 @@ <h4 class="modal-title" id="keyboardModalLabel">Keyboard Shortcuts</h4>
 
 <!--
 MkDocs version : 1.6.0
-Build Date UTC : 2024-07-02 12:02:40.557929+00:00
+Build Date UTC : 2024-07-02 12:10:57.947998+00:00
 -->

troubleshooting.html

@@ -258,6 +258,7 @@ <h2 id="cannot-read-any-parameters-device-family-is-0">Cannot read any parameter
 <h2 id="no-data-even-though-the-adapters-red-led-is-on">No data even though the adapter's red LED is on</h2>
 <ul>
 <li>Make sure the adapter is connected to CL+/CL- and not to the third (G+) pin: G+ will drive the LED, but it's not a data line.</li>
+<li>Make sure you have powered on the microcontroller. You may think that the heating system powers the microcontroller because the LED on the BSB-LAN adapter is on, but it doesn't. You need to power it separately.</li>
 <li>With the adapter for the Olimex microcontrollers: Make sure that the BSB-LAN adapter board sits <strong>exactly</strong> in the center of the UEXT connector. It will still fit in, if it's shifted one pin left or right, but it won't work.</li>
 <li>Make sure the RX/TX pins are set/detected correctly.</li>
 </ul>