Skip to content

Tool for creating sample streams for the Volca Sample

License

Notifications You must be signed in to change notification settings

glindstedt/vsrs

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

37 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

vsrs

Latest Version Documentation

Command line utility for generating sample streams for the Volca Sample

Using a configuration file you configure which samples to use, which indexes to put them in, and whether samples should be compressed. You can also generate a stream with the factory preset samples by using a .alldata file.

The tool outputs a .wav file which is ready to be used for transferring the data to the Volca Sample. For details on the transfer process refer to transferring syrostream to your volca sample

Installing

You need to have Rust installed, see https://www.rust-lang.org/tools/install for installation instructions.

cargo install vsrs

Running

Loading a configuration file

vsrs load example.ron

Restoring factory settings using a .alldata file. Files can be found at https://github.com/korginc/volcasample/tree/master/alldata

vsrs reset all_sample_preset.alldata

To play the .wav file from the command line you can use aplay on Linux, or afplay on macOs. WARNING: do not play over speakers, make sure you've set up audio correctly to play into the volca first!

Gotchas

  • It's good practice to wipe the sample memory with all_sample_empty.alldata before loading new samples, otherwise there's a higher risk of getting a memory full error.

Practical Examples

Check out the contrib directory for configuration file examples.

Configuration format

Supported configuration formats:

RON

// example.ron
#![enable(implicit_some)]
VolcaSample(
    // optional, valid values are 8-16
    default_compression: 16,
    // map which supports keys in the range 0-99
    samples: {
        // Put kick.wav at sample index 0, and compress it to a bit depth of 8
        0: Sample((
            // the file path is relative to the location of the configuration file
            file: "kick.wav",
            // optional, valid values are 8-16
            compression: 8,
        )),
        // Erase the sample at index 1
        1: Erase,
    },
    // sets the default part setting for the reverb function
    // optional, on or off (off if not specified)
    default_part_reverb: on,
    // map of sequence patterns, valid keys are 0-9
    patterns: {
        0: (
            // map of pattern parts, valid keys are 0-9
            parts: {
                0: (
                    // the sample to use for this part, valid values are 0-99
                    sample: 0,
                    // sequence steps, 1 = on, 0 = off
                    steps: [0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1],
                    // part toggle options, all optional
                    loop: on,
                    reverb: off,
                    reverse: on,
                    motion: on,
                    mute: off,
                    // part parameters, all optional
                    level: 127,          // 0-127 (127)
                    pan: 64,             // 1-127 (64=center) (64)
                    speed: 64,           // semitone = 40-88 (64=center) (64), continuous = 129-255 (192=center)
                    amp_eg_attack: 64,   // 0-127 (0)
                    amp_eg_decay: 64,    // 0-127 (127)
                    pitch_eg_int: 64,    // 1-127 (64=center) (64)
                    pitch_eg_attack: 64, // 0-127 (0)
                    pitch_eg_decay: 64,  // 0-127 (127)
                    starting_point: 64,  // 0-127 (0)
                    length: 64,          // 0-127 (127)
                    hi_cut: 64,          // 0-127 (127)
                    // motion sequences for the part, optional
                    motion_sequences: (
                        // valid values: 0-127
                        level_start: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        level_end: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        // valid values: 1-127
                        pan_start: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        pan_end: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        // valid values: semitone = 40-88, continuous = 129-255
                        speed_start: [40, 43, 46, 49, 52, 55, 58, 61, 64, 67, 70, 73, 76, 79, 82, 85],
                        speed_end: [129, 137, 145, 153, 161, 169, 177, 185, 193, 201, 209, 217, 225, 233, 241, 249],
                        // valid values: 0-127
                        amp_eg_attack: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        amp_eg_decay: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        // valid values: 1-127
                        pitch_eg_int: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        // valid values: 0-127
                        pitch_eg_attack: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        pitch_eg_decay: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        start_point: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        length: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                        hi_cut: [1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120],
                    ),
                ),
            },
        ),
    },
)

JSON

See the RON section for more details about the values

{
  "default_compression": 16,
  "samples": {
    "0": {
      "Sample": {
          "file": "kick.wav",
          "compression": 8
      }
    },
    "1": "Erase"
  },
  "default_part_reverb": "on",
  "patterns": {
    "0": {
      "parts": {
        "0": {
          "sample": 0,
          "steps": [ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1 ],
          "motion": "off",
          "loop": "on",
          "reverb": "off",
          "reverse": "on",
          "mute": "off",
          "level": 127,
          "pan": 64,
          "speed": 64,
          "amp_eg_attack": 64,
          "amp_eg_decay": 64,
          "pitch_eg_int": 64,
          "pitch_eg_attack": 64,
          "pitch_eg_decay": 64,
          "starting_point": 64,
          "length": 64,
          "hi_cut": 64,
          "motion_sequences": {
            "level_start": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "level_end": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "pan_start": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "pan_end": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "speed_start": [ 40, 43, 46, 49, 52, 55, 58, 61, 64, 67, 70, 73, 76, 79, 82, 85 ],
            "speed_end": [ 129, 137, 145, 153, 161, 169, 177, 185, 193, 201, 209, 217, 225, 233, 241, 249 ],
            "amp_eg_attack": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "amp_eg_decay": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "pitch_eg_int": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "pitch_eg_attack": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "pitch_eg_decay": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "start_point": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "length": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ],
            "hi_cut": [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          }
        }
      }
    }
  }
}

YAML

See the RON section for more details about the values

default_compression: 16
samples:
  0:
    Sample:
      file: kick.wav
      compression: 8
  1: Erase
default_part_reverb: on
patterns:
  0:
    parts:
      0:
        sample: 0
        steps: [ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1 ]
        motion: off
        loop: on
        reverb: off
        reverse: on
        mute: off
        level: 127
        pan: 64
        speed: 64
        amp_eg_attack: 64
        amp_eg_decay: 64
        pitch_eg_int: 64
        pitch_eg_attack: 64
        pitch_eg_decay: 64
        starting_point: 64
        length: 64
        hi_cut: 64
        motion_sequences:
          level_start: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          level_end: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          pan_start: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          pan_end: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          speed_start: [ 40, 43, 46, 49, 52, 55, 58, 61, 64, 67, 70, 73, 76, 79, 82, 85 ]
          speed_end: [ 129, 137, 145, 153, 161, 169, 177, 185, 193, 201, 209, 217, 225, 233, 241, 249 ]
          amp_eg_attack: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          amp_eg_decay: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          pitch_eg_int: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          pitch_eg_attack: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          pitch_eg_decay: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          start_point: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          length: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]
          hi_cut: [ 1, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 ]

About

Tool for creating sample streams for the Volca Sample

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published