Add document for Dreo integration #36851
Conversation
home-assistant
bot
added
has-parent
✅ Deploy Preview for home-assistant-docs ready!
To edit notification comments on pull requests, go to your Netlify site configuration. |
📝 WalkthroughWalkthroughThe pull request introduces a new integration for Dreo smart devices in Home Assistant, specifically focusing on Dreo Tower Fans. The documentation provides comprehensive guidance for users to connect and control Dreo smart devices through the Home Assistant platform. It covers prerequisites, configuration steps, supported device models, and potential troubleshooting scenarios for users looking to integrate Dreo smart switches and outlets into their home automation setup. Changes
Sequence DiagramsequenceDiagram
participant User
participant "Home Assistant"
participant "Dreo App"
participant "Dreo Device"
User->>Dreo App: Register device
User->>Home Assistant: Add Dreo integration
Home Assistant->>Dreo App: Request device credentials
Dreo App-->>Home Assistant: Provide authentication
Home Assistant->>Dreo Device: Discover and connect
Home Assistant->>User: Integration setup complete
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (5)
source/_integrations/dreo.markdown (5)
35-38: Enhance prerequisite sectionConsider adding more specific prerequisites such as:
- Minimum required version of the Dreo App
- Network requirements (e.g., devices and Home Assistant must be on the same network)
- Account requirements (e.g., Dreo account creation process)
🧰 Tools
🪛 Markdownlint (0.37.0)
35-35: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
25-33: Add device-specific detailsConsider enhancing the device list with:
- Links to product pages or documentation for each model
- Model-specific features or limitations
- Release dates or firmware version requirements
🧰 Tools
🪛 Markdownlint (0.37.0)
25-25: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
26-26: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
49-53: Enhance attributes documentationConsider adding:
- Full range of possible values for each attribute
- Default values
- Whether attributes are read-only or can be set
- Examples of how to use these attributes in automations
59-59: Fix grammar in troubleshooting stepAdd a comma after "not" in the sentence.
-- **Check Dreo App Connection**: Ensure that your devices are properly connected to the Dreo App. Try restarting the Dreo App and checking if the devices are still visible and controllable within it. If not, re-pair the devices with the Dreo App following the app's official pairing instructions. +- **Check Dreo App Connection**: Ensure that your devices are properly connected to the Dreo App. Try restarting the Dreo App and checking if the devices are still visible and controllable within it. If not, re-pair the devices with the Dreo App following the app's official pairing instructions.🧰 Tools
🪛 LanguageTool
[uncategorized] ~59-~59: Possible missing comma found.
Context: ... not, re-pair the devices with the Dreo App following the app's official pairing in...(AI_HYDRA_LEO_MISSING_COMMA)
🪛 Markdownlint (0.37.0)
59-59: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
22-65: Fix markdown formatting issuesPlease add blank lines:
- Around all headings (lines 22, 25, 35, 39, 46, 57, 58, 63)
- Around all lists (lines 26, 40, 59, 64)
- At the end of the file
This will improve readability and comply with markdown best practices.
🧰 Tools
🪛 LanguageTool
[uncategorized] ~59-~59: Possible missing comma found.
Context: ... not, re-pair the devices with the Dreo App following the app's official pairing in...(AI_HYDRA_LEO_MISSING_COMMA)
🪛 Markdownlint (0.37.0)
22-22: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
25-25: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
35-35: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
39-39: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
46-46: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
57-57: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
58-58: Expected: 1; Actual: 0; Above
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
58-58: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
63-63: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
26-26: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
40-40: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
59-59: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
64-64: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
65-65: null
Files should end with a single newline character(MD047, single-trailing-newline)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/dreo.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/dreo.markdown
[uncategorized] ~59-~59: Possible missing comma found.
Context: ... not, re-pair the devices with the Dreo App following the app's official pairing in...
(AI_HYDRA_LEO_MISSING_COMMA)
🪛 Markdownlint (0.37.0)
source/_integrations/dreo.markdown
22-22: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
25-25: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
35-35: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
39-39: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
46-46: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
57-57: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
58-58: Expected: 1; Actual: 0; Above
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
58-58: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
63-63: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
26-26: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
40-40: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
59-59: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
64-64: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
65-65: null
Files should end with a single newline character
(MD047, single-trailing-newline)
⏰ Context from checks skipped due to timeout of 90000ms (3)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
- GitHub Check: Pages changed - home-assistant-docs
🔇 Additional comments (1)
source/_integrations/dreo.markdown (1)
6-6: Verify the release versionThe release version is set to
2025.1. Please ensure this aligns with the planned release schedule and the corresponding core PR's release version.✅ Verification successful
Release version 2025.1 is correct
The specified release version aligns with Home Assistant's versioning pattern for new integrations being added in early 2025.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Check the release version in the core PR gh pr view $(curl -s "https://api.github.com/search/issues?q=repo:home-assistant/core+is:pr+dreo+in:title" | jq -r '.items[0].number') --json body | jq -r '.body' | grep -i "release\|version"Length of output: 295
Script:
#!/bin/bash # Search for manifest.json files related to Dreo fd manifest.json --exec grep -l "dreo\|Dreo" {} \; # Search for recent Dreo-related files fd . --type f --changed-within 2weeks --exec grep -l "dreo\|Dreo" {} \; # Check if there are any existing Dreo integration files rg -l "ha_release.*202[45]" --type mdLength of output: 4732
source/_integrations/dreo.markdown
Outdated
| 1. **Open Home Assistant UI**: Log in to your Home Assistant web interface. Navigate to the "Settings" section, usually found in the sidebar. | ||
| 2. **Access Integrations**: In the "Settings" menu, click on "Integrations". This will take you to a page listing all the available integrations. | ||
| 3. **Search for Dreo**: Use the search bar on the Integrations page to search for the "Dreo" integration. | ||
| 4. **Initiate Setup**: Once you've located the Dreo integration, click on it. Since `ha_config_flow: true`, the setup wizard should automatically start. Follow the on-screen prompts, which will likely include authorizing Home Assistant to access your Dreo App account. This may involve logging into your Dreo App credentials within the Home Assistant setup flow. |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Remove technical reference
Remove the reference to ha_config_flow: true as it's an internal implementation detail that shouldn't be exposed in user-facing documentation.
-4. **Initiate Setup**: Once you've located the Dreo integration, click on it. Since `ha_config_flow: true`, the setup wizard should automatically start. Follow the on-screen prompts, which will likely include authorizing Home Assistant to access your Dreo App account. This may involve logging into your Dreo App credentials within the Home Assistant setup flow.
+4. **Initiate Setup**: Once you've located the Dreo integration, click on it to start the setup wizard. Follow the on-screen prompts to authorize Home Assistant to access your Dreo App account. This will involve logging into your Dreo App credentials within the Home Assistant setup flow.📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| 4. **Initiate Setup**: Once you've located the Dreo integration, click on it. Since `ha_config_flow: true`, the setup wizard should automatically start. Follow the on-screen prompts, which will likely include authorizing Home Assistant to access your Dreo App account. This may involve logging into your Dreo App credentials within the Home Assistant setup flow. | |
| 4. **Initiate Setup**: Once you've located the Dreo integration, click on it to start the setup wizard. Follow the on-screen prompts to authorize Home Assistant to access your Dreo App account. This will involve logging into your Dreo App credentials within the Home Assistant setup flow. |
Modify dreo.markdown file
There was a problem hiding this comment.
Actionable comments posted: 0
♻️ Duplicate comments (1)
source/_integrations/dreo.markdown (1)
7-7: 🛠️ Refactor suggestionRemove technical implementation detail
The
ha_config_flowparameter is an internal implementation detail that shouldn't be exposed in user-facing documentation.-ha_config_flow: true
🧹 Nitpick comments (5)
source/_integrations/dreo.markdown (5)
22-34: Consider adding model-specific feature detailsWhile the list of supported models is comprehensive, it would be helpful to include any model-specific features or limitations to help users understand differences between models.
Would you like me to help create a feature comparison table for the different models?
🧰 Tools
🪛 Markdownlint (0.37.0)
22-22: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
25-25: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
26-26: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
25-34: Fix markdown formattingAdd blank lines around the list for better readability.
### Fans + - DR-HTF001S: Tower Fan - DR-HTF002S: Tower Fan - DR-HTF004S: Tower Fan - DR-HTF005S: Tower Fan - DR-HTF007S: Tower Fan - DR-HTF008S: Tower Fan - DR-HTF009S: Tower Fan - DR-HTF010S: Tower Fan +🧰 Tools
🪛 Markdownlint (0.37.0)
25-25: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
26-26: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
39-45: Fix markdown formattingAdd blank lines around the numbered list for better readability.
## Configuration instructions + 1. **Open Home Assistant UI**: Log in to your Home Assistant web interface. Navigate to the "Settings" section, usually found in the sidebar. 2. **Access Integrations**: In the "Settings" menu, click on "Integrations". This will take you to a page listing all the available integrations. 3. **Search for Dreo**: Use the search bar on the Integrations page to search for the "Dreo" integration. 4. **Initiate Setup**: Once you've located the Dreo integration, click on it to start the setup wizard. Follow the on-screen prompts to authorize Home Assistant to access your Dreo App account. This will involve logging into your Dreo App credentials within the Home Assistant setup flow. 5. **Complete Setup**: After providing the necessary information and authorizing the connection, the integration should be set up successfully. You should then be able to control your Dreo devices from within Home Assistant. +🧰 Tools
🪛 Markdownlint (0.37.0)
39-39: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
40-40: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
49-53: Enhance attribute documentationConsider adding more details about valid values for each attribute:
- For
mode: List all possible modes- For
speed: Clarify if 1-4 are the only valid values- For
oscillate: Specify if any additional states exist beyond true/false
65-65: Add trailing newlineAdd a newline character at the end of the file.
🧰 Tools
🪛 Markdownlint (0.37.0)
65-65: null
Files should end with a single newline character(MD047, single-trailing-newline)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/dreo.markdown(1 hunks)
🧰 Additional context used
🪛 Markdownlint (0.37.0)
source/_integrations/dreo.markdown
22-22: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
25-25: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
35-35: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
39-39: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
46-46: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
57-57: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
58-58: Expected: 1; Actual: 0; Above
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
58-58: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
63-63: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
26-26: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
40-40: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
59-59: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
64-64: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
65-65: null
Files should end with a single newline character
(MD047, single-trailing-newline)
⏰ Context from checks skipped due to timeout of 90000ms (3)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
- GitHub Check: Pages changed - home-assistant-docs
🔇 Additional comments (2)
source/_integrations/dreo.markdown (2)
14-21: Well-structured introduction!The introduction clearly states the purpose of the integration and its requirements. The supported platform is correctly specified.
57-65: Comprehensive troubleshooting guideThe troubleshooting section effectively covers common issues and provides clear solutions.
However, fix the markdown formatting by adding blank lines around lists:
## Troubleshooting + ### Device not discovered + - **Check Dreo App Connection**: Ensure that your devices are properly connected to the Dreo App. Try restarting the Dreo App and checking if the devices are still visible and controllable within it. If not, re-pair the devices with the Dreo App following the app's official pairing instructions. - **Home Assistant Network Issues**: Make sure that your Home Assistant instance has network access. You can test this by trying to access other online services from within Home Assistant (for example, checking the weather integration if it's set up). If there are network problems, troubleshoot your Home Assistant's network connection, which may involve checking your router settings, Wi-Fi passwords, or Ethernet connections. - **Permissions**: Double-check that you've granted all the necessary permissions during the integration setup process. Incorrect permissions can prevent Home Assistant from discovering your Dreo devices. + ### Inability to control devices + - **Device State Sync**: Sometimes, the device state may not sync correctly between the Dreo App and Home Assistant. Try toggling the device on/off, changing the mode, or adjusting the speed from within the Dreo App, and then refreshing the device page in Home Assistant to see if the state updates. - **App Version Mismatch**: Ensure that both the Dreo App and Home Assistant are running up-to-date versions. An outdated version of either software could lead to compatibility issues and control problems. Update the Dreo App from the official app store for your device, and check for Home Assistant updates in the Home Assistant UI's update section. +🧰 Tools
🪛 Markdownlint (0.37.0)
57-57: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
58-58: Expected: 1; Actual: 0; Above
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
58-58: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
63-63: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
59-59: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
64-64: null
Lists should be surrounded by blank lines(MD032, blanks-around-lists)
65-65: null
Files should end with a single newline character(MD047, single-trailing-newline)
Remove ha_config_flow parameter and add blank line
There was a problem hiding this comment.
Actionable comments posted: 1
🧹 Nitpick comments (3)
source/_integrations/dreo.markdown (3)
13-15: Add Dreo App requirementsConsider adding information about:
- Required Dreo App version
- App store links for iOS/Android
- Any regional availability restrictions
26-33: Enhance device model informationConsider adding brief descriptions for each model to highlight their unique features or differences. This would help users identify their specific model and understand any model-specific capabilities.
51-55: Enhance attributes documentationConsider adding:
- Valid value ranges for each attribute
- Default values
- Whether attributes are read-only or writable
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/dreo.markdown(1 hunks)
🧰 Additional context used
🪛 Markdownlint (0.37.0)
source/_integrations/dreo.markdown
47-47: Expected: 1; Actual: 2
Multiple consecutive blank lines
(MD012, no-multiple-blanks)
21-21: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
35-35: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
48-48: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
59-59: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
60-60: Expected: 1; Actual: 0; Above
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
60-60: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
65-65: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
61-61: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
66-66: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
67-67: null
Files should end with a single newline character
(MD047, single-trailing-newline)
⏰ Context from checks skipped due to timeout of 90000ms (3)
- GitHub Check: Redirect rules - home-assistant-docs
- GitHub Check: Header rules - home-assistant-docs
- GitHub Check: Pages changed - home-assistant-docs
🔇 Additional comments (2)
source/_integrations/dreo.markdown (2)
35-46: Configuration instructions look good!The setup instructions are clear, user-friendly, and properly avoid technical implementation details.
🧰 Tools
🪛 Markdownlint (0.37.0)
35-35: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines(MD022, blanks-around-headings)
6-6: Verify the release versionThe release version is set to
2025.1. Please confirm if this is the intended version for the integration's first release. If this is meant to target the next major release, you might need to adjust it based on the current development cycle.✅ Verification successful
Release version is appropriate
The version
2025.1is correctly set for this new integration as it targets the first release of 2025, following the established pattern seen in other recent integrations (e.g., weheat: 2024.10).🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Check current version pattern in other recent integrations fd -e markdown . source/_integrations -t f -d 1 | xargs grep -l "^ha_release: " | xargs grep "^ha_release: " | sort -r | head -n 5Length of output: 419
Script:
#!/bin/bash # Check manifest files for current version fd manifest.json . -t f | xargs grep -l "version" | xargs grep "version" | sort -r | head -n 5 # Check most recently added integrations fd -e markdown . source/_integrations -t f -d 1 -0 | xargs -0 stat -f "%m %N" | sort -rn | head -n 5 | cut -d' ' -f2- | xargs grep "^ha_release: "Length of output: 280
Script:
#!/bin/bash # Check recently modified integration files find source/_integrations -name "*.markdown" -type f -printf "%T@ %p\n" | sort -nr | head -n 5 | cut -f2- -d" " | xargs grep "^ha_release: " # Check current version pattern grep -r "MAJOR_VERSION = " .Length of output: 456
source/_integrations/dreo.markdown
Outdated
| ## Troubleshooting | ||
| ### Device not discovered | ||
| - **Check Dreo App Connection**: Ensure that your devices are properly connected to the Dreo App. Try restarting the Dreo App and checking if the devices are still visible and controllable within it. If not, re-pair the devices with the Dreo App following the app's official pairing instructions. | ||
| - **Home Assistant Network Issues**: Make sure that your Home Assistant instance has network access. You can test this by trying to access other online services from within Home Assistant (for example, checking the weather integration if it's set up). If there are network problems, troubleshoot your Home Assistant's network connection, which may involve checking your router settings, Wi-Fi passwords, or Ethernet connections. | ||
| - **Permissions**: Double-check that you've granted all the necessary permissions during the integration setup process. Incorrect permissions can prevent Home Assistant from discovering your Dreo devices. | ||
|
|
||
| ### Inability to control devices | ||
| - **Device State Sync**: Sometimes, the device state may not sync correctly between the Dreo App and Home Assistant. Try toggling the device on/off, changing the mode, or adjusting the speed from within the Dreo App, and then refreshing the device page in Home Assistant to see if the state updates. | ||
| - **App Version Mismatch**: Ensure that both the Dreo App and Home Assistant are running up-to-date versions. An outdated version of either software could lead to compatibility issues and control problems. Update the Dreo App from the official app store for your device, and check for Home Assistant updates in the Home Assistant UI's update section. |
There was a problem hiding this comment.
🛠️ Refactor suggestion
Fix markdown formatting
Please address the following formatting issues:
- Add blank lines around headings (lines 59, 60, 65)
- Add blank lines around lists (lines 61, 66)
- Ensure file ends with a single newline
Apply these changes:
## Troubleshooting
+
### Device not discovered
+
- **Check Dreo App Connection**: Ensure that your devices are properly connected to the Dreo App. Try restarting the Dreo App and checking if the devices are still visible and controllable within it. If not, re-pair the devices with the Dreo App following the app's official pairing instructions.
- **Home Assistant Network Issues**: Make sure that your Home Assistant instance has network access. You can test this by trying to access other online services from within Home Assistant (for example, checking the weather integration if it's set up). If there are network problems, troubleshoot your Home Assistant's network connection, which may involve checking your router settings, Wi-Fi passwords, or Ethernet connections.
- **Permissions**: Double-check that you've granted all the necessary permissions during the integration setup process. Incorrect permissions can prevent Home Assistant from discovering your Dreo devices.
### Inability to control devices
+
- **Device State Sync**: Sometimes, the device state may not sync correctly between the Dreo App and Home Assistant. Try toggling the device on/off, changing the mode, or adjusting the speed from within the Dreo App, and then refreshing the device page in Home Assistant to see if the state updates.
- **App Version Mismatch**: Ensure that both the Dreo App and Home Assistant are running up-to-date versions. An outdated version of either software could lead to compatibility issues and control problems. Update the Dreo App from the official app store for your device, and check for Home Assistant updates in the Home Assistant UI's update section.
+📝 Committable suggestion
‼️ IMPORTANT
Carefully review the code before committing. Ensure that it accurately replaces the highlighted code, contains no missing lines, and has no issues with indentation. Thoroughly test & benchmark the code to ensure it meets the requirements.
| ## Troubleshooting | |
| ### Device not discovered | |
| - **Check Dreo App Connection**: Ensure that your devices are properly connected to the Dreo App. Try restarting the Dreo App and checking if the devices are still visible and controllable within it. If not, re-pair the devices with the Dreo App following the app's official pairing instructions. | |
| - **Home Assistant Network Issues**: Make sure that your Home Assistant instance has network access. You can test this by trying to access other online services from within Home Assistant (for example, checking the weather integration if it's set up). If there are network problems, troubleshoot your Home Assistant's network connection, which may involve checking your router settings, Wi-Fi passwords, or Ethernet connections. | |
| - **Permissions**: Double-check that you've granted all the necessary permissions during the integration setup process. Incorrect permissions can prevent Home Assistant from discovering your Dreo devices. | |
| ### Inability to control devices | |
| - **Device State Sync**: Sometimes, the device state may not sync correctly between the Dreo App and Home Assistant. Try toggling the device on/off, changing the mode, or adjusting the speed from within the Dreo App, and then refreshing the device page in Home Assistant to see if the state updates. | |
| - **App Version Mismatch**: Ensure that both the Dreo App and Home Assistant are running up-to-date versions. An outdated version of either software could lead to compatibility issues and control problems. Update the Dreo App from the official app store for your device, and check for Home Assistant updates in the Home Assistant UI's update section. | |
| ## Troubleshooting | |
| ### Device not discovered | |
| - **Check Dreo App Connection**: Ensure that your devices are properly connected to the Dreo App. Try restarting the Dreo App and checking if the devices are still visible and controllable within it. If not, re-pair the devices with the Dreo App following the app's official pairing instructions. | |
| - **Home Assistant Network Issues**: Make sure that your Home Assistant instance has network access. You can test this by trying to access other online services from within Home Assistant (for example, checking the weather integration if it's set up). If there are network problems, troubleshoot your Home Assistant's network connection, which may involve checking your router settings, Wi-Fi passwords, or Ethernet connections. | |
| - **Permissions**: Double-check that you've granted all the necessary permissions during the integration setup process. Incorrect permissions can prevent Home Assistant from discovering your Dreo devices. | |
| ### Inability to control devices | |
| - **Device State Sync**: Sometimes, the device state may not sync correctly between the Dreo App and Home Assistant. Try toggling the device on/off, changing the mode, or adjusting the speed from within the Dreo App, and then refreshing the device page in Home Assistant to see if the state updates. | |
| - **App Version Mismatch**: Ensure that both the Dreo App and Home Assistant are running up-to-date versions. An outdated version of either software could lead to compatibility issues and control problems. Update the Dreo App from the official app store for your device, and check for Home Assistant updates in the Home Assistant UI's update section. | |
🧰 Tools
🪛 Markdownlint (0.37.0)
59-59: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
60-60: Expected: 1; Actual: 0; Above
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
60-60: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
65-65: Expected: 1; Actual: 0; Below
Headings should be surrounded by blank lines
(MD022, blanks-around-headings)
61-61: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
66-66: null
Lists should be surrounded by blank lines
(MD032, blanks-around-lists)
67-67: null
Files should end with a single newline character
(MD047, single-trailing-newline)
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (3)
source/_integrations/dreo.markdown (3)
38-39: Add app store linksConsider adding links to the Dreo App on both iOS App Store and Google Play Store to help users easily find and install the required app.
Before you can use this integration, all devices must be registered with the -Dreo App. Once registration is complete, you can add the Dreo integration in Home Assistant through the UI. +Dreo App ([iOS App Store](link_to_ios_app), [Google Play Store](link_to_android_app)). Once registration is complete, you can add the Dreo integration in Home Assistant through the UI.
53-57: Enhance attribute documentationThe speed attribute description could be more detailed. Consider:
- Clarifying if speed 1 is lowest and 4 is highest
- Documenting the behavior when setting invalid speeds
-| `speed` | The current speed setting (1-4). | 1 | +| `speed` | The fan speed setting from 1 (lowest) to 4 (highest). Invalid values will be clamped to the nearest valid speed. | 1 |
65-65: Fix formatting issuesPlease address the following:
- Add a comma after "If not" in the device discovery troubleshooting
- Ensure the file ends with a single newline
-If not, re-pair the devices +If not, re-pair the devices,Also applies to: 72-72
🧰 Tools
🪛 LanguageTool
[uncategorized] ~65-~65: Possible missing comma found.
Context: ... not, re-pair the devices with the Dreo App following the app's official pairing in...(AI_HYDRA_LEO_MISSING_COMMA)
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/dreo.markdown(1 hunks)
🧰 Additional context used
🪛 LanguageTool
source/_integrations/dreo.markdown
[uncategorized] ~65-~65: Possible missing comma found.
Context: ... not, re-pair the devices with the Dreo App following the app's official pairing in...
(AI_HYDRA_LEO_MISSING_COMMA)
🪛 Markdownlint (0.37.0)
source/_integrations/dreo.markdown
72-72: null
Files should end with a single newline character
(MD047, single-trailing-newline)
🔇 Additional comments (2)
source/_integrations/dreo.markdown (2)
41-48: Configuration instructions look great!The step-by-step setup instructions are clear, concise, and user-friendly.
6-6: Verify the release versionThe release version
2025.1appears to be set to a future date. Please verify if this is the intended version for this integration's initial release.✅ Verification successful
Release version is correct
The specified release version
2025.1matches the current Home Assistant release cycle, as evidenced by the latest releases (2025.1.x).🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash # Check current and upcoming Home Assistant release versions curl -s https://api.github.com/repos/home-assistant/core/releases | jq -r '.[].tag_name' | head -n 5Length of output: 151
Add comma with sentence last
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Nitpick comments (5)
source/_integrations/dreo.markdown (5)
23-23: Fix typo: Remove extra spaceThere's a double space after "App." in this line.
-This integration supports devices controllable by the Dreo App. The following devices are supported by this integration: +This integration supports devices controllable by the Dreo App. The following devices are supported by this integration:
27-34: Consider adding more device detailsConsider enhancing the device list with additional information for each model, such as:
- Key features
- Release year
- Links to product pages
This would help users identify their specific models more easily.
41-48: Consider adding screenshotsThe configuration instructions are clear, but they could be enhanced with screenshots showing:
- The integration search page
- The authorization flow
- The final setup screen
This would make it easier for users to follow along.
65-65: Fix formatting: Remove unexpected periodThere's an unexpected period after "App's" in the pairing instructions text.
-- **Check Dreo App Connection**: Ensure that your devices are properly connected to the Dreo App. Try restarting the Dreo App and checking if the devices are still visible and controllable within it. If not, re-pair the devices with the Dreo App following the app's. official pairing instructions. +- **Check Dreo App Connection**: Ensure that your devices are properly connected to the Dreo App. Try restarting the Dreo App and checking if the devices are still visible and controllable within it. If not, re-pair the devices with the Dreo App following the app's official pairing instructions.
51-58: Add automation examplesConsider adding examples of how to use these attributes in automations. For example:
- How to create an automation that changes the fan speed based on room temperature
- How to toggle oscillation on a schedule
- How to switch modes based on time of day
This would help users better understand the practical applications of these attributes.
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro
📒 Files selected for processing (1)
source/_integrations/dreo.markdown(1 hunks)
🔇 Additional comments (3)
source/_integrations/dreo.markdown (3)
6-6: Verify the release versionThe release version is set to
2025.1, which appears to be a future date. Please verify if this is the intended version or if it should be adjusted to match the actual planned release version.
13-20: Introduction and platform support look good!The introduction clearly explains the integration's purpose and correctly lists the supported platforms.
61-72: Fix markdown formattingThe formatting issues from the previous review still need to be addressed:
- Add blank lines around headings
- Add blank lines around lists
- Ensure file ends with a single newline
Proposed change
Add documentation for Dreo integration
Type of change
currentbranch).currentbranch).nextbranch).nextbranch).Additional information
Checklist
currentbranch.nextbranch.Summary by CodeRabbit
Summary by CodeRabbit
New Features
Documentation