SAI: audio pll, sai peripheral driver, and small rtic synthesizing sample #466
SpinFastAnnotations
31 errors and 128 warnings
|
lint-hal (imxrt-ral/imxrt1021)
Unable to create clippy annotations! Reason: HttpError: Resource not accessible by integration
|
|
lint-hal (imxrt-ral/imxrt1021)
Exiting due to clippy errors
|
|
lint-hal (imxrt-ral/imxrt1176_cm4)
Unable to create clippy annotations! Reason: HttpError: Resource not accessible by integration
|
|
lint-hal (imxrt-ral/imxrt1176_cm4)
Exiting due to clippy errors
|
|
lint-hal (imxrt-ral/imxrt1062)
Unable to create clippy annotations! Reason: HttpError: Resource not accessible by integration
|
|
lint-hal (imxrt-ral/imxrt1062)
Exiting due to clippy errors
|
|
lint-hal (imxrt-ral/imxrt1051)
Unable to create clippy annotations! Reason: HttpError: Resource not accessible by integration
|
|
lint-hal (imxrt-ral/imxrt1051)
Exiting due to clippy errors
|
|
lint-hal (imxrt-ral/imxrt1015)
Unable to create clippy annotations! Reason: HttpError: Resource not accessible by integration
|
|
lint-hal (imxrt-ral/imxrt1015)
Exiting due to clippy errors
|
|
lint-hal (imxrt-ral/imxrt1064)
Unable to create clippy annotations! Reason: HttpError: Resource not accessible by integration
|
|
lint-hal (imxrt-ral/imxrt1064)
Exiting due to clippy errors
|
|
lint-hal (imxrt-ral/imxrt1052)
The operation was canceled.
|
|
lint-hal (imxrt-ral/imxrt1176_cm7)
The operation was canceled.
|
|
lint-hal (imxrt-ral/imxrt1011)
The operation was canceled.
|
|
lint-hal (imxrt-ral/imxrt1061)
The operation was canceled.
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170):
src/common/sai.rs#L368
no field `TDR` on type `imxrt_ral::sai::RegisterBlock`
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170)
The process '/home/runner/.cargo/bin/cargo' failed with exit code 101
|
|
docs:
src/chip/imxrt10xx/ccm.rs#L432
`const` and `let` are mutually exclusive
|
|
docs:
src/chip/imxrt10xx/ccm.rs#L432
cannot find function `clock_frequency` in module `pll4`
|
|
docs
aborting due to 2 previous errors
|
|
docs:
src/common/sai.rs#L329
`mut` must precede `dyn`
|
|
docs:
src/common/sai.rs#L329
expected one of `!`, `.`, `::`, `;`, `?`, `{`, `}`, or an operator, found `,`
|
|
docs:
src/common/sai.rs#L329
expected expression, found `:`
|
|
docs:
src/common/sai.rs#L327
cannot find value `tx` in this scope
|
|
docs:
src/common/sai.rs#L327
cannot find value `tx0_pin` in this scope
|
|
docs:
src/common/sai.rs#L328
cannot find value `tx` in this scope
|
|
docs:
src/common/sai.rs#L328
cannot find value `tx1_pin` in this scope
|
|
tests (imxrt-ral/imxrt1062,imxrt1060)
The operation was canceled.
|
|
tests (imxrt-ral/imxrt1021,imxrt1020)
The operation was canceled.
|
|
tests (imxrt-ral/imxrt1011,imxrt1010)
The operation was canceled.
|
|
format
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
format
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
format
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
format
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
format
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1021)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
lint-hal (imxrt-ral/imxrt1021)
It seems that this Action is executed from the forked repository.
|
|
lint-hal (imxrt-ral/imxrt1021)
GitHub Actions are not allowed to create Check annotations, when executed for a forked repos. See https://github.com/actions-rs/clippy-check/issues/2 for details.
|
|
lint-hal (imxrt-ral/imxrt1021)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1021)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1021)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1021)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1176_cm4)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
lint-hal (imxrt-ral/imxrt1176_cm4)
It seems that this Action is executed from the forked repository.
|
|
lint-hal (imxrt-ral/imxrt1176_cm4)
GitHub Actions are not allowed to create Check annotations, when executed for a forked repos. See https://github.com/actions-rs/clippy-check/issues/2 for details.
|
|
lint-hal (imxrt-ral/imxrt1176_cm4)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1176_cm4)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1176_cm4)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1176_cm4)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1062)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
lint-hal (imxrt-ral/imxrt1062)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1062)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1062)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1062)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1062)
It seems that this Action is executed from the forked repository.
|
|
lint-hal (imxrt-ral/imxrt1062)
GitHub Actions are not allowed to create Check annotations, when executed for a forked repos. See https://github.com/actions-rs/clippy-check/issues/2 for details.
|
|
lint-hal (imxrt-ral/imxrt1051)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
lint-hal (imxrt-ral/imxrt1051)
It seems that this Action is executed from the forked repository.
|
|
lint-hal (imxrt-ral/imxrt1051)
GitHub Actions are not allowed to create Check annotations, when executed for a forked repos. See https://github.com/actions-rs/clippy-check/issues/2 for details.
|
|
lint-hal (imxrt-ral/imxrt1051)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1051)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1051)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1051)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1015)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
lint-hal (imxrt-ral/imxrt1015)
It seems that this Action is executed from the forked repository.
|
|
lint-hal (imxrt-ral/imxrt1015)
GitHub Actions are not allowed to create Check annotations, when executed for a forked repos. See https://github.com/actions-rs/clippy-check/issues/2 for details.
|
|
lint-hal (imxrt-ral/imxrt1015)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1015)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1015)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1015)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1064)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
lint-hal (imxrt-ral/imxrt1064)
It seems that this Action is executed from the forked repository.
|
|
lint-hal (imxrt-ral/imxrt1064)
GitHub Actions are not allowed to create Check annotations, when executed for a forked repos. See https://github.com/actions-rs/clippy-check/issues/2 for details.
|
|
lint-hal (imxrt-ral/imxrt1064)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1064)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1064)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1064)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1052)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
lint-hal (imxrt-ral/imxrt1052)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1052)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1052)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1052)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1176_cm7)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
lint-hal (imxrt-ral/imxrt1176_cm7)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1176_cm7)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1176_cm7)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1176_cm7)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1011)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
lint-hal (imxrt-ral/imxrt1011)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1011)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1011)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1011)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1061)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/clippy-check@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
lint-hal (imxrt-ral/imxrt1061)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1061)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1061)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
lint-hal (imxrt-ral/imxrt1061)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170):
src/common/sai.rs#L18
unused import: `crate::ccm`
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170):
src/common/sai.rs#L234
unused doc comment
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170)
`imxrt-hal` (lib) generated 2 warnings
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170)
build failed, waiting for other jobs to finish...
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1176_cm7,imxrt1170)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
docs
The following actions uses node12 which is deprecated and will be forced to run on node16: actions/checkout@v2, actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
docs
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
docs
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
docs
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
docs
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
docs:
src/common/sai.rs#L18
unused import: `crate::ccm`
|
|
docs:
src/common/sai.rs#L234
unused doc comment
|
|
docs:
src/chip/imxrt10xx/ccm/analog.rs#L98
unused variable: `post_div_select`
|
|
docs:
src/common/sai.rs#L230
unused variable: `cfg`
|
|
docs:
src/common/sai.rs#L371
unused variable: `frame`
|
|
docs:
src/common/sai.rs#L33
associated constants `SampleOnRising` and `SampleOnFalling` are never used
|
|
docs:
src/common/sai.rs#L38
fields `sync_width`, `sync_early`, and `polarity` are never read
|
|
docs:
src/common/sai.rs#L58
associated constant `MclkDiv` is never used
|
|
docs:
src/common/sai.rs#L62
fields `src_swap`, `input_delay`, `polarity`, and `source` are never read
|
|
docs:
src/common/sai.rs#L69
fields `byte_order`, `word_length`, and `frame_length` are never read
|
|
tests (imxrt-ral/imxrt1062,imxrt1060)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
tests (imxrt-ral/imxrt1062,imxrt1060)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1062,imxrt1060)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1062,imxrt1060)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1062,imxrt1060)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1062,imxrt1060):
src/common/sai.rs#L18
unused import: `crate::ccm`
|
|
tests (imxrt-ral/imxrt1062,imxrt1060):
src/common/sai.rs#L234
unused doc comment
|
|
tests (imxrt-ral/imxrt1021,imxrt1020)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
tests (imxrt-ral/imxrt1021,imxrt1020):
src/common/sai.rs#L18
unused import: `crate::ccm`
|
|
tests (imxrt-ral/imxrt1021,imxrt1020):
src/common/sai.rs#L234
unused doc comment
|
|
tests (imxrt-ral/imxrt1021,imxrt1020):
src/chip/imxrt10xx/ccm/analog.rs#L98
unused variable: `post_div_select`
|
|
tests (imxrt-ral/imxrt1021,imxrt1020):
src/common/sai.rs#L230
unused variable: `cfg`
|
|
tests (imxrt-ral/imxrt1011,imxrt1010)
The following actions uses node12 which is deprecated and will be forced to run on node16: actions-rs/toolchain@v1, actions-rs/cargo@v1. For more info: https://github.blog/changelog/2023-06-13-github-actions-all-actions-will-run-on-node16-instead-of-node12-by-default/
|
|
tests (imxrt-ral/imxrt1021,imxrt1020):
src/common/sai.rs#L371
unused variable: `frame`
|
|
tests (imxrt-ral/imxrt1011,imxrt1010)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1011,imxrt1010)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1021,imxrt1020):
src/common/sai.rs#L33
associated constants `SampleOnRising` and `SampleOnFalling` are never used
|
|
tests (imxrt-ral/imxrt1011,imxrt1010)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1021,imxrt1020):
src/common/sai.rs#L38
fields `sync_width`, `sync_early`, and `polarity` are never read
|
|
tests (imxrt-ral/imxrt1011,imxrt1010)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1021,imxrt1020):
src/common/sai.rs#L58
associated constant `MclkDiv` is never used
|
|
tests (imxrt-ral/imxrt1011,imxrt1010):
src/common/sai.rs#L18
unused import: `crate::ccm`
|
|
tests (imxrt-ral/imxrt1021,imxrt1020):
src/common/sai.rs#L62
fields `src_swap`, `input_delay`, `polarity`, and `source` are never read
|
|
tests (imxrt-ral/imxrt1011,imxrt1010):
src/common/sai.rs#L234
unused doc comment
|
|
tests (imxrt-ral/imxrt1021,imxrt1020):
src/common/sai.rs#L69
fields `byte_order`, `word_length`, and `frame_length` are never read
|
|
tests (imxrt-ral/imxrt1011,imxrt1010):
src/chip/imxrt10xx/ccm/analog.rs#L98
unused variable: `post_div_select`
|
|
tests (imxrt-ral/imxrt1011,imxrt1010):
src/common/sai.rs#L230
unused variable: `cfg`
|
|
tests (imxrt-ral/imxrt1021,imxrt1020)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1011,imxrt1010):
src/common/sai.rs#L371
unused variable: `frame`
|
|
tests (imxrt-ral/imxrt1021,imxrt1020)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1011,imxrt1010):
src/common/sai.rs#L33
associated constants `SampleOnRising` and `SampleOnFalling` are never used
|
|
tests (imxrt-ral/imxrt1021,imxrt1020)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1011,imxrt1010):
src/common/sai.rs#L38
fields `sync_width`, `sync_early`, and `polarity` are never read
|
|
tests (imxrt-ral/imxrt1021,imxrt1020)
The `set-output` command is deprecated and will be disabled soon. Please upgrade to using Environment Files. For more information see: https://github.blog/changelog/2022-10-11-github-actions-deprecating-save-state-and-set-output-commands/
|
|
tests (imxrt-ral/imxrt1011,imxrt1010):
src/common/sai.rs#L58
associated constant `MclkDiv` is never used
|
|
tests (imxrt-ral/imxrt1011,imxrt1010):
src/common/sai.rs#L62
fields `src_swap`, `input_delay`, `polarity`, and `source` are never read
|
|
tests (imxrt-ral/imxrt1011,imxrt1010):
src/common/sai.rs#L69
fields `byte_order`, `word_length`, and `frame_length` are never read
|