Fix/config enable to disable #38
Conversation
WalkthroughThe changes in this pull request involve updates to configuration options for the output and batch submitters in the executor module. The flags Changes
Possibly related PRs
Suggested reviewers
Poem
Thank you for using CodeRabbit. We offer it for free to the OSS community and would appreciate your support in helping us grow. If you find it useful, would you consider giving us a shout-out on your favorite social media? 🪧 TipsChatThere are 3 ways to chat with CodeRabbit:
Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments. CodeRabbit Commands (Invoked using PR comments)
Other keywords and placeholders
CodeRabbit Configuration File (
|
![coderabbitai[bot]](https://avatars.githubusercontent.com/in/347564?s=60&v=4){kind=small}
There was a problem hiding this comment.
Actionable comments posted: 0
🧹 Outside diff range and nitpick comments (3)
executor/types/config.go (1)
Line range hint
143-186: Consider documenting validation behavior for disable flags.While boolean fields don't require explicit validation, it might be helpful to add a comment in the
Validate()method explaining that the disable flags are intentionally not validated as they default to false and any boolean value is valid.executor/executor.go (1)
274-274: Consider improving readability of the double negative.While the logic is correct, the double negative (!DisableOutputSubmitter) might slightly reduce readability. However, since this aligns with the new configuration approach, it's acceptable as is.
Consider adding a comment to clarify that this condition means "if output submitter is enabled".
executor/README.md (1)
51-57: Consider adding migration notes for existing users.While the documentation for the new flags is clear, it would be helpful to add a note about migrating from the old
enable_*flags to the newdisable_*flags. This would help existing users understand how to update their configuration files.Consider adding a note like:
// DisableBatchSubmitter is the flag to disable the batch submitter. // If it is true, the batch submitter will not be started. "disable_batch_submitter": false, + // Note: This replaces the previous enable_batch_submitter flag. + // To maintain the same behavior: + // - If you previously had enable_batch_submitter: true, use disable_batch_submitter: false + // - If you previously had enable_batch_submitter: false, use disable_batch_submitter: true
📜 Review details
Configuration used: CodeRabbit UI
Review profile: CHILL
📒 Files selected for processing (3)
executor/README.md(1 hunks)executor/executor.go(3 hunks)executor/types/config.go(4 hunks)
🔇 Additional comments (9)
executor/types/config.go (4)
53-59: LGTM! Good choice on the naming convention.
The change from "enable" to "disable" flags is a good improvement as it makes the default state (false) more intuitive - submitters are enabled by default unless explicitly disabled. The field documentation clearly explains the behavior.
117-119: LGTM! Default values are correctly set.
The default configuration maintains backward compatibility by setting both disable flags to false, ensuring submitters are enabled by default.
Line range hint 232-242: LGTM! Verify usage of the new flag across the codebase.
The logic is correctly inverted to check for !DisableBatchSubmitter. Let's verify that all callers handle this new logic correctly.
#!/bin/bash
# Search for any remaining references to the old EnableBatchSubmitter flag
rg -i "enablebatchsubmitter"
# Search for usage of the new DisableBatchSubmitter flag to ensure consistent handling
rg -i "disablebatchsubmitter"Line range hint 190-199: LGTM! Verify usage of the new flag across the codebase.
The logic is correctly inverted to check for !DisableOutputSubmitter. Let's verify that all callers handle this new logic correctly.
✅ Verification successful
The DisableOutputSubmitter flag is consistently used across the codebase
The verification shows that:
- All references to the flag use the new
DisableOutputSubmitternaming consistently - The flag is properly documented in both
config.goandREADME.md - The flag is correctly used in the executor logic with the same inverted condition (
!ex.cfg.DisableOutputSubmitter) - No traces of the old
EnableOutputSubmitterflag remain
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Search for any remaining references to the old EnableOutputSubmitter flag
rg -i "enableoutputsubmitter"
# Search for usage of the new DisableOutputSubmitter flag to ensure consistent handling
rg -i "disableoutputsubmitter"
Length of output: 652
Script:
#!/bin/bash
# Search for any references to DisableOutputSubmitter
rg -i "disableoutputsubmitter"
# Search for any references to EnableOutputSubmitter
rg -i "enableoutputsubmitter"
# Search for any references to OutputSubmitter to ensure we catch all related config
rg -i "outputsubmitter"
Length of output: 988
executor/executor.go (2)
175-175: LGTM: Condition correctly inverted for batch submitter.
The change from checking enabled state to disabled state maintains the same logical flow while aligning with the new configuration approach.
286-286: Verify consistency with makeDANode condition.
The logic is correct, but let's verify the consistency between this condition and the one in makeDANode.
✅ Verification successful
The search results show all usages of DisableBatchSubmitter in the codebase, which is sufficient to verify the consistency. Let me generate the final response:
Conditions for batch submitter are consistent across the codebase
The logic is consistent between makeDANode and getKeyringConfigs:
- In
makeDANode: Returns noop DA whenDisableBatchSubmitteris true - In
getKeyringConfigs: Sets DA keyring config whenDisableBatchSubmitteris false
Both conditions work together to properly handle the batch submitter configuration.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Description: Verify that the conditions for batch submitter are consistent
# Expected: Both conditions should use DisableBatchSubmitter in opposite ways
# Search for all usages of DisableBatchSubmitter
rg "DisableBatchSubmitter" -A 2 -B 2
Length of output: 1930
executor/README.md (3)
51-53: LGTM: Clear documentation for the disable_output_submitter flag.
The documentation clearly explains the purpose and behavior of the disable_output_submitter flag. The default value of false maintains backward compatibility by keeping the output submitter enabled by default.
55-57: LGTM: Clear documentation for the disable_batch_submitter flag.
The documentation clearly explains the purpose and behavior of the disable_batch_submitter flag. The default value of false maintains backward compatibility by keeping the batch submitter enabled by default.
51-57: Verify configuration changes across the codebase.
Let's verify that the configuration changes are consistently applied across the codebase and that there are no lingering references to the old flags.
✅ Verification successful
Let me check the executor code to verify how these flags are used in the actual implementation.
Based on the results, I can now provide the final response:
Configuration changes are correctly implemented and consistent
The changes to use disable_* flags instead of enable_* flags are properly implemented across the codebase:
- The flags are correctly defined in
executor/types/config.go - The implementation in
executor/executor.gocorrectly uses these flags with proper logic:DisableBatchSubmitteris used to return a noop DA when batch submitter is disabledDisableOutputSubmitterandDisableBatchSubmitterare used in keyring configuration logic with correct boolean conditions
No references to old enable_* flags were found, indicating a clean transition to the new configuration format.
🏁 Scripts executed
The following scripts were executed for the analysis:
Script:
#!/bin/bash
# Description: Check for any remaining references to the old enable_* flags
# and verify consistency of the new disable_* flags across the codebase
echo "Checking for old enable_* flags..."
rg -i "enable_output_submitter|enable_batch_submitter" --type go --type json
echo -e "\nChecking usage of new disable_* flags..."
rg -i "disable_output_submitter|disable_batch_submitter" --type go --type json
echo -e "\nChecking for potential test files that might need updating..."
fd -e test.go
Length of output: 664
Script:
#!/bin/bash
# Check the executor implementation for how these flags are used
echo "Checking executor implementation..."
rg -A 5 "DisableOutputSubmitter|DisableBatchSubmitter" executor/executor.go
echo -e "\nChecking for any config initialization or tests..."
fd -e go -x rg -l "NewConfig|TestConfig"
Length of output: 740
Summary by CodeRabbit
New Features
disable_output_submitteranddisable_batch_submitter, with default values set tofalse.Documentation