This role configures the OpenSSH daemon.
None. The required packages are managed by the role.
- From
defaults/main.yml
## OpenSSH server
# Set the package install state for distribution packages
# Options are 'present' and 'latest'
security_package_state: present
# Don't apply OS defaults when set to true
security_sshd_skip_defaults: 'True'
# If the below is false, don't manage the service or reload the SSH
# daemon at all
# yamllint disable-line rule:line-length
security_sshd_manage_service: "{{ false if ansible_virtualization_type == 'docker' else true }}"
# If the below is false, don't reload the ssh deamon on change
security_sshd_allow_reload: "{{ sshd_manage_service }}"
# Ensure sshd is running and enabled at boot time.
security_enable_sshd: 'yes' # V-72235
## Server side configuration
security_sshd_Port: 22
#security_sshd_AddressFamily
#security_sshd_ListenAddress
# Set the allowed ssh protocols.
security_sshd_Protocol: 2 # V-72251
#security_sshd_HostKey
#security_sshd_AcceptEnv
security_sshd_AllowAgentForwarding: 'no'
#security_sshd_AllowGroups
security_sshd_AllowStreamLocalForwarding: 'no'
security_sshd_AllowTcpForwarding: 'no'
#security_sshd_AllowUsers
#security_sshd_AuthenticationMethods
#security_sshd_AuthorizedKeysCommand
#security_sshd_AuthorizedKeysCommandUser
#security_sshd_AuthorizedKeysFile
#security_sshd_AuthorizedPrincipalsFile
# Specify a text file to be displayed as the banner/MOTD for all sessions.
security_sshd_banner_file: /etc/issue # V-71861 / V-72225
# Deploy a login banner. # V-72225 / V-71863
security_login_banner_text: |
------------------------------------------------------------------------------
* WARNING *
* You are accessing a secured system and your actions will be logged along *
* with identifying information. Disconnect immediately if you are not an *
* authorized user of this system. *
------------------------------------------------------------------------------
#security_sshd_Banner
security_sshd_ChallengeResponseAuthentication: 'yes'
#security_sshd_ChrootDirectory
#security_sshd_Ciphers
# Set a list of allowed ssh ciphers.
# yamllint disable-line rule:line-length
security_sshd_Ciphers: '[email protected],[email protected],[email protected],aes256-ctr,aes192-ctr,aes128-ctr' # V-72221
# Set the interval for max session length and the number of intervals to allow.
security_sshd_ClientAliveCountMax: 0 # V-72241
security_sshd_ClientAliveInterval: 600 # V-72237
# Disallow compression or delay after login.
security_sshd_Compression: 'delayed' # V-72267
#security_sshd_DenyGroups
#security_sshd_DenyUsers
security_sshd_DisableForwarding: 'yes'
#security_sshd_ExposeAuthenticationMethods
#security_sshd_FingerprintHash
#security_sshd_ForceCommand
#security_sshd_GatewayPorts
# Disallow Generic Security Service Application Program Interface (GSSAPI) auth.
security_sshd_GSSAPIAuthentication: 'no' # V-72259
#security_sshd_GSSAPICleanupCredentials
#security_sshd_GSSAPIKeyExchange
#security_sshd_GSSAPIEnablek5users
#security_sshd_GSSAPIStoreCredentialsOnRekey
#security_sshd_GSSAPIStrictAcceptorCheck
#security_sshd_GSSAPIKexAlgorithms
# yamllint disable-line rule:line-length
#security_sshd_HostbasedAcceptedKeyTypes: '[email protected],[email protected],[email protected],ssh-ed25519,ssh-rsa'
# Disallow host based authentication.
security_sshd_HostbasedAuthentication: 'no' # V-71959
#security_sshd_HostbasedUsesNameFromPacketOnly
#security_sshd_HostCertificate
#security_sshd_HostKeyAgent
# Disallow rhosts authentication.
security_sshd_IgnoreRhosts: 'yes' # V-72243
# Disallow authentication using known hosts authentication.
# yamllint disable-line rule:line-length
security_sshd_IgnoreUserKnownHosts: 'yes' # V-72249 / V-72239
#security_sshd_IPQoS
#security_sshd_KbdInteractiveAuthentication
# Disallow Kerberos authentication.
security_sshd_KerberosAuthentication: 'no' # V-72261
#security_sshd_KerberosGetAFSToken
#security_sshd_KerberosOrLocalPasswd
#security_sshd_KerberosTicketCleanup
#security_sshd_KerberosUseKuserok
# yamllint disable-line rule:line-length
security_sshd_KexAlgorithms: '[email protected],diffie-hellman-group-exchange-sha256'
#security_sshd_KeyRegenerationInterval
#security_sshd_LoginGraceTime
#security_sshd_LogLevel
# Set the list of allowed Message Authentication Codes (MACs) for ssh.
# yamllint disable-line rule:line-length
security_sshd_MACs: '[email protected],[email protected],hmac-sha2-512,hmac-sha2-256' # V-72253
#security_sshd_MaxAuthTries
#security_sshd_MaxSessions
#security_sshd_MaxStartups
security_sshd_PasswordAuthentication: 'no'
# Disallow logins from users with empty/null passwords.
security_sshd_PermitEmptyPasswords: 'no' # V-71939 / RHEL-07-010440
#security_sshd_PermitOpen
# Permit direct root logins
security_sshd_PermitRootLogin: 'no' # V-72247
#security_sshd_PermitTTY
#security_sshd_PermitTunnel
# Disallow users from overriding the ssh environment variables.
security_sshd_PermitUserEnvironment: 'no' # V-71957
security_sshd_PermitUserRC: 'no' # V-71957
#security_sshd_PidFile
# Print the last login for a user when they log in over ssh.
security_sshd_PrintLastLog: 'yes' # V-72245
#security_sshd_PrintMotd
security_sshd_PubkeyAuthentication: 'yes'
#security_sshd_RekeyLimit
#security_sshd_RevokedKeys
#security_sshd_RhostsRSAAuthentication
##security_sshd_RSAAuthentication
#security_sshd_ServerKeyBits
#security_sshd_ServerKeyBits
# Require strict mode checking of home directory configuration files.
security_sshd_StrictModes: 'yes' # V-72263
security_sshd_Subsystem: 'sftp sftp-internal'
#security_sshd_SyslogFacility
#security_sshd_TCPKeepAlive
#security_sshd_TrustedUserCAKeys
#security_sshd_UseDNS
#security_sshd_UsePAM
# Require privilege separation at every opportunity.
security_sshd_UsePrivilegeSeparation: 'yes' # V-72265
#security_sshd_VersionAddendum
#security_sshd_X11DisplayOffset
# Enable X11 forwarding.
security_sshd_X11Forwarding: 'no' # V-72303
#security_sshd_X11UseLocalhost
#security_sshd_XAuthLocation
security_sshd_X11MaxDisplays: '10'
## Client side configuration
# yamllint disable-line rule:line-length
security_sshd_HostKeyAlgorithms: '[email protected],[email protected],ssh-ed25519,ssh-rsa'- From
vars/main.yml
# RHEL 7 STIG: Packages to add/remove
stig_packages_rhel7:
- packages:
- openssh
- openssh-server
state: "{{ security_package_state }}"
enabled: 'True'
# VARS DEFAULTS
# The following are defaults for OS specific configuration in var files in
# this role. They should not be set by role users.
sshd_config_owner: root
sshd_config_group: root
sshd_config_mode: '0600'
sshd_config_file: /etc/ssh/sshd_config
sshd_binary: /usr/sbin/sshd
sshd_service: sshd.socket
sshd_sftp_server: /usr/libexec/openssh/sftp-server
sshd_defaults: {}
sshd_skip_defaults: "{{ security_sshd_skip_defaults }}"
sshd:
Port: "{{ security_sshd_Port | default('22') }}"
AddressFamily: "{{ security_sshd_AddressFamily | default('any') }}"
# yamllint disable-line rule:line-length
#ListenAddress: "{{ security_sshd_ListenAddress | default('localhost') }}"
Protocol: "{{ security_sshd_Protocol }}"
HostKey:
- /etc/ssh/ssh_host_rsa_key
- /etc/ssh/ssh_host_ed25519_key
AcceptEnv:
- LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
- LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
- LC_IDENTIFICATION LC_ALL LANGUAGE
- XMODIFIERS
AllowAgentForwarding: "{{ security_sshd_AllowAgentForwarding }}"
# AllowGroups: "{{ security_sshd_AllowGroups | default('') }}"
AllowStreamLocalForwarding: "{{ security_sshd_AllowStreamLocalForwarding }}"
AllowTcpForwarding: "{{ security_sshd_AllowTcpForwarding }}"
# AllowUsers: "{{ security_sshd_AllowUsers | default('') }}"
AuthenticationMethods: "{{ security_sshd_AuthenticationMethods | default('any') }}"
# AuthorizedKeysCommand: "{{ security_sshd_AuthorizedKeysCommand | default('') }}"
# yamllint disable-line rule:line-length
# AuthorizedKeysCommandUser: "{{ security_sshd_AuthorizedKeysCommandUser | default('') }}"
AuthorizedKeysFile: .ssh/authorized_keys
# yamllint disable-line rule:line-length
#AuthorizedPrincipalsCommand: "{{ security_sshd_AuthorizedPrincipalsCommand | default('none') }}"
# yamllint disable-line rule:line-length
#AuthorizedPrincipalsCommandUser: "{{ security_sshd_AuthorizedPrincipalsCommandUser | default('none') }}"
#AuthorizedPrincipalsFile: "{{ security_sshd_AuthorizedPrincipalsFile | default('none') }}"
Banner: "{{ security_sshd_banner_file }}"
# yamllint disable-line rule:line-length
ChallengeResponseAuthentication: "{{ security_sshd_ChallengeResponseAuthentication }}"
# ChrootDirectory: "{{ security_sshd_ChrootDirectory | default('') }}"
Ciphers: "{{ security_sshd_Ciphers }}"
ClientAliveCountMax: "{{ security_sshd_ClientAliveCountMax }}"
ClientAliveInterval: "{{ security_sshd_ClientAliveInterval }}"
Compression: "{{ security_sshd_Compression }}"
# DenyGroups: "{{ security_sshd_DenyGroups | default('') }}"
# DenyUsers: "{{ security_sshd_DenyUsers | default('') }}"
DisableForwarding: "{{ security_sshd_DisableForwarding | default('no') }}"
# yamllint disable-line rule:line-length
ExposeAuthenticationMethods: "{{ security_sshd_ExposeAuthenticationMethods | default('never') }}"
# FingerprintHash: "{{ security_sshd_FingerprintHash | default('sha256') }}"
# ForceCommand: "{{ security_sshd_ForceCommand | default('') }}"
GatewayPorts: "{{ security_sshd_GatewayPorts | default('no') }}"
GSSAPIAuthentication: "{{ security_sshd_GSSAPIAuthentication }}"
# yamllint disable-line rule:line-length
GSSAPICleanupCredentials: "{{ security_sshd_GSSAPICleanupCredentials | default('yes') }}"
GSSAPIKeyExchange: "{{ security_sshd_GSSAPIKeyExchange | default('no') }}"
GSSAPIEnablek5users: "{{ security_sshd_GSSAPIEnablek5users | default('no') }}"
# yamllint disable-line rule:line-length
GSSAPIStoreCredentialsOnRekey: "{{ security_sshd_GSSAPIStoreCredentialsOnRekey | default('no') }}"
# yamllint disable-line rule:line-length
GSSAPIStrictAcceptorCheck: "{{ security_sshd_GSSAPIStrictAcceptorCheck | default('yes') }}"
# yamllint disable-line rule:line-length
GSSAPIKexAlgorithms: "{{ security_sshd_GSSAPIKexAlgorithms | default('gss-gex-sha1-,gss-group1-sha1-,gss-group14-sha1-') }}"
#HostbasedAcceptedKeyTypes: "{{ security_sshd_HostbasedAcceptedKeyTypes }}"
HostbasedAuthentication: "{{ security_sshd_HostbasedAuthentication }}"
# yamllint disable-line rule:line-length
HostbasedUsesNameFromPacketOnly: "{{ security_sshd_HostbasedUsesNameFromPacketOnly | default('no') }}"
# HostCertificate: "{{ security_sshd_HostCertificate | default('') }}"
# HostKey: "{{ security_sshd_HostKey | default('') }}"
# HostKeyAgent: "{{ security_sshd_HostKeyAgent | default('') }}"
# HostKeyAlgorithms: "{{ security_sshd_HostKeyAlgorithms | default('') }}"
IgnoreRhosts: "{{ security_sshd_IgnoreRhosts | default('yes') }}"
IgnoreUserKnownHosts: "{{ security_sshd_IgnoreUserKnownHosts | default('yes') }}"
IPQoS: "{{ security_sshd_IPQoS | default('lowdelay throughput') }}"
# yamllint disable-line rule:line-length
#KbdInteractiveAuthentication: "{{ security_sshd_KbdInteractiveAuthentication }}"
KerberosAuthentication: "{{ security_sshd_KerberosAuthentication }}"
# Disabled, as it requires other components to be installed
# KerberosGetAFSToken: "{{ security_sshd_KerberosGetAFSToken | default('no') }}"
KerberosOrLocalPasswd: "{{ security_sshd_KerberosOrLocalPasswd | default('yes') }}"
KerberosTicketCleanup: "{{ security_sshd_KerberosTicketCleanup | default('yes') }}"
KerberosUseKuserok: "{{ security_sshd_KerberosUseKuserok | default('yes') }}"
KexAlgorithms: "{{ security_sshd_KexAlgorithms }}"
# yamllint disable-line rule:line-length
#KeyRegenerationInterval: "{{ security_sshd_KeyRegenerationInterval | default('3600') }}"
LoginGraceTime: "{{ security_sshd_LoginGraceTime | default('120') }}"
LogLevel: "{{ security_sshd_LogLevel | default('INFO') }}"
MACs: "{{security_sshd_MACs }}"
MaxAuthTries: "{{ security_sshd_MaxAuthTries | default('6') }}"
MaxSessions: "{{ security_sshd_MaxSessions | default('10') }}"
MaxStartups: "{{ security_sshd_MaxStartups | default('10:30:100') }}"
PasswordAuthentication: "{{ security_sshd_PasswordAuthentication }}"
PermitEmptyPasswords: "{{ security_sshd_PermitEmptyPasswords }}"
PermitOpen: "{{ security_sshd_PermitOpen | default('any') }}"
PermitRootLogin: "{{ security_sshd_PermitRootLogin }}"
PermitTTY: "{{ security_sshd_PermitTTY | default('yes') }}"
PermitTunnel: "{{ security_sshd_PermitTunnel | default('no') }}"
PermitUserEnvironment: "{{ security_sshd_PermitUserEnvironment }}"
PermitUserRC: "{{ security_sshd_PermitUserRC }}"
PidFile: "{{ security_sshd_PidFile | default('/var/run/sshd.pid') }}"
PrintLastLog: "{{ security_sshd_PrintLastLog }}"
PrintMotd: "{{ security_sshd_PrintMotd | default('yes') }}"
#PubkeyAcceptedKeyTypes:
PubkeyAuthentication: "{{ security_sshd_PubkeyAuthentication }}"
RekeyLimit: "{{ security_sshd_RekeyLimit | default('default none') }}"
# RevokedKeys: "{{ security_sshd_RevokedKeys | default('') }}"
#RhostsRSAAuthentication: "{{ security_sshd_RhostsRSAAuthentication | default('no') }}"
#RSAAuthentication: "{{ security_sshd_RSAAuthentication | default('no') }}"
#ServerKeyBits: "{{ security_sshd_ServerKeyBits | default('1024') }}"
ShowPatchLevel: "{{ security_sshd_ShowPatchLevel | default('no') }}"
StreamLocalBindMask: "{{ security_sshd_StreamLocalBindMask | default('0177') }}"
StrictModes: "{{ security_sshd_StrictModes}}"
Subsystem: "{{ security_sshd_Subsystem }}"
SyslogFacility: AUTHPRIV
TCPKeepAlive: "{{ security_sshd_TCPKeepAlive | default('yes') }}"
# TrustedUserCAKeys: "{{ security_sshd_TrustedUserCAKeys | default('') }}"
UseDNS: "{{ security_sshd_UseDNS | default('yes') }}"
UsePAM: 'yes' # FIXME?
UsePrivilegeSeparation: "{{ security_sshd_UsePrivilegeSeparation }}"
VersionAddendum: "{{ security_sshd_VersionAddendum | default('none') }}"
X11DisplayOffset: "{{ security_sshd_X11DisplayOffset | default('10') }}"
X11Forwarding: "{{ security_sshd_X11Forwarding }}"
X11MaxDisplays: "{{ security_sshd_X11MaxDisplays }}"
X11UseLocalhost: "{{ security_sshd_X11UseLocalhost | default('yes') }}"
XAuthLocation: "{{ security_sshd_XAuthLocation | default('/usr/bin/xauth') }}"None.
This example is to show the range of configuration this role provides, it is notintended to be used as-is.
---
- hosts: servers
roles:
- { role: ansible-os-hardening-sshd }This repository uses
git-flow.
To contribute to the role, create a new feature branch (feature/foo_bar_baz),
write Molecule tests for
the new functionality
and submit a pull request targeting the develop branch.
Happy hacking!
GPLv3