Skip to content

joshskidmore/gpd-pocket-2-arch-guide

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

12 Commits
 
 

Repository files navigation

GPD Pocket 2 Dual Boot - Arch / Windows 10 Install Guide

This guide overviews how to do a full wipe of the GPD Pocket 2, followed by a dual boot of Arch Linux and Windows 10.

Table of Contents

What works?

  • Full 1080P display
  • Touchscreen
  • Mouse/optical/nub-replacement thingy
  • Wifi (Intel AC 3165)
  • Bluetooth
  • Audio / speaker / microphone
  • USB-C (Power Delivery)/PD charging (at 40W / 20V @ 2A)
  • USB-C data / roleswitching
  • Proper ACPI S3 Sleep/Wake
  • Displayport/HDMI over USB-C (UNTESTED)
  • Hibernation (UNTESTED)

Prerequisites

Step 1: Use Arch USB to reformat drive

  1. Download standard Arch linux ISO
  2. Write ISO to USB drive
  3. Boot Pocket 2 and tap F12
  4. In the options, select the USB device containing Arch
  5. Reformat mmcblk0 disk
Essentially, this is what we're going for:

    NAME              FSTYPE        SIZE    NOTES                       MOUNTPOINT
    mmcblk0
    ├─mmcblk0p1       vfat          512M    efi                         /boot
    ├─mmcblk0p2       luks+lvm2     60G     linux                       /
    ├─mmcblk0p[3-5]                 ~58G    windows

It's critical that we make the first partition (mmcblk0p1) the EFI partition. For now, we're going
to placehold our linux partition because the Windows 10 installer will create a bunch of bullshit
partitions. For this guide, by placing the linux partition directly after the EFI partition, we
can let Windows create its dumpster fire of partitions, and it won't effect us.

    gdisk /dev/mmcblk0
    # o ↵ to create a new empty GUID partition table (GPT)
    # y ↵ to confirm

    # n ↵ add a new partition
    # ↵ to select default partition number of 1
    # ↵ to select default start at first sector
    # +512M ↵ make that size partition for booting
    # ef00 ↵ EFI partition type

    # n ↵ add a new partition
    # ↵ to select default partition number of 2
    # ↵ to select default start at first sector
    # +60G ↵ allocate whatever size wanted for linux

    # we're intentionally leaving space for Windows 10 partitions

    # p ↵ if you want to check the partition layout
    # w ↵ to write changes to disk
    # y ↵ to confirm
  1. Format the EFI partition to vfat

    mkfs.vfat /dev/mmcblk0p1

Step 2: Install Windows 10

  1. Create a Windows 10 install USB
  2. Boot Pocket 2 and tap F12
  3. In the options, select the USB device containing the Windows 10 installer
  4. Install Windows 10. The only important thing is that in the disk partitioner, let Windows use the unused space at the end of the drive. The Windows installer will automatically place its EFI files into the EFI partition (mmcblk0p1). The installer will warn you that it has to create additional partitions which is normal.

Windows will take over the Pocket 2 and act as if it's rolling solo and that's completely fine. It will reboot a couple times. It's also normal that Windows 10 is rotated right until Windows drivers are installed and rotation is configured.

Step 3: Let's Install Arch

Remove the Windows 10 install USB stick and, just like step one, insert the Arch install USB and boot into Arch.

Configure LUKS + LVM2 partitions on mmcblk0p2

# Encrypt /dev/mmcblk0p2
# This step will ask for a password which will be used to unlock the partition on boot. Make sure you know the password.
cryptsetup luksFormat -v -s 512 -h sha512 /dev/mmcblk0p2

# Open/mount encrypted disk
# Upon unlocking, this will mount the unlocked disk to /dev/mapper/luks.
cryptsetup luksOpen /dev/mmcblk0p2 luks

# Create LVM2 Physical Volume (PV) on /dev/mapper/luks
pvcreate /dev/mapper/luks

# Create LVM2 Volume Group (VG) on /dev/mapper/luks
vgcreate rootvg /dev/mapper/luks

# Create LVM2 Logical Volume (LV) on rootvg
# This will create an LVM logical volume at /dev/mapper/rootvg-root.
lvcreate -n root -l 100%FREE rootvg

# Finally, format the logical volume to ext4
mkfs.ext4 /dev/mapper/rootvg-root

Wirelessly connect to the internet

Internet is needed to download packages. wifi-menu is a basic curses command which will temporarily select and configure a wifi network.

wifi-menu

Mount, pacstrap and prepare for arch-chroot

# Mount the ext4-formatted root LV
# Note: /mnt becomes your actual Arch install.
mount /dev/mapper/rootvg-root /mnt

# Make the boot directory to mount the EFI (mmcblk0p1) partition
mkdir /mnt/boot

# Mount the EFI parition
mount /dev/mmcblk0p1 /mnt/boot

# Pacstrap the /mnt directory with utilities needed for arch-chroot
pacstrap /mnt base base-devel dialog openssl-1.0 bash-completion git intel-ucode wpa_supplicant

# Generate your fstab
genfstab -pU /mnt >> /mnt/etc/fstab

arch-chroot

arch-chroot drops you into your Arch filesystem in order to handle additional install tasks.

arch-chroot /mnt /bin/bash

Awesome! You're now in your to-be Arch filesystem. Let's install some basic shit.

Set your hostname (yeah, this is the most difficult part .. at least for me)

echo MYHOSTNAME > /mnt/etc/hostname

By now, you're probably sick of looking at tiny text, sideways. Let's fix the font size issue (on reboot) by creating the file /etc/vconsole.conf and adding:

FONT=latarcyrheb-sun32

Because we're using disk encryption and LVM2, we need to add and reorder mkinitcpio's hooks. Edit /etc/mkinitcpio.conf and completely replace the line beginning with HOOKS with:

HOOKS=(base systemd autodetect keyboard sd-vconsole modconf block sd-encrypt sd-lvm2 fsck filesystems)

With new HOOKS in-tow, regenerate your ramdisk and kernel using mkinitcpio:

mkinitcpio -P

We'll be using systemd-boot as a better grub replacement. First, install systemd-booti using the following command. The command will create a new EFI entry named Linux Boot Manager which will sit alongside Windows' Windows Boot Manager.

bootctl install

Windows will be included as a choice on boot, and any additional entries must be created in the directory /boot/loader/entries/. We're going to create a default entry for arch.

First, we need the block or UUID of the mmcblk0p2 LUKS partition for our arch entry. Since you're working sideways with little ass text, lets dump that ID right into the empty entry file:

blkid | grep mmcblk0p2 | cut -d \" -f 2 > /boot/loader/entries/arch.conf

Next, add the following to the /boot/loader/entries/arch.conf entry. Replace [UUID] with the UUID you dumped into the file. Remove the brackets.

title Arch Linux
linux /vmlinuz-linux
initrd /intel-ucode.img
initrd /initramfs-linux.img
options rd.luks.name=[UUID]=luks root=/dev/mapper/rootvg-root rw fbcon=rotate:1

Of note is the kernel command line option fbcon=rotate:1. This will rotate any non-X content to the right (after reboot).

We also need to edit (or possibly create) the file /boot/loader/loader.conf. This file handles systemd-boot's general config options. Most of the following options should be self explanitory, but one that might not be is console-mode 2. This option will force larger text during the handoff from the BIOS to the kernel. The file should contain:

default arch
auto-firmware no
timeout 3
console-mode 2

Specify a timezone:

ln -sf /usr/share/zoneinfo/US/Eastern /etc/localtime

Create /etc/locale.conf with the following:

LANG=en_US.UTF-8
LANGUAGE=en_US
LC_ALL=C

Edit the file /etc/locale.gen and uncomment the proper locale line:

en_US.UTF-8 UTF-8

Then, generate the locale using the following command:

locale-gen

Set a root password:

passwd

Create your user and set a password:

useradd -m -g users -G wheel,storage,power -s /bin/bash [USERNAME]
passwd [USERNAME]

If you wish to run sudo'd commands without entering a password, run visudo and uncomment the line:

%wheel ALL=(ALL) NOPASSWD: ALL

Ok, we're done in arch-chroot! Let's unmount and restart.

# Exit arch-chroot and back into the default shell
exit

# Recursively unmount /mnt
umount -R /mnt

# Remove USB stick and reboot
reboot

Step 4: From Text to X

Upon reboot, immediately after the BIOS, you should see systemd-boot prompt you with two options: arch and Windows Boot Manager. All text should be sized decently and rotated correctly. If this is not the case, something has been missed.

You should also be prompted to enter the LUKS partition decryption password that you created earlier. If entered correctly, the system will continue to load and provide a terminal login.

Login with the user you created, not root.

Wirelessly connect to the internet (again)

You know, because reboot.

wifi-menu

Add some repos to pacman

Edit /etc/pacman.conf and uncomment these lines:

[multilib]
Include = /etc/pacman.d/mirrorlists

In /etc/pacman.conf, append these lines to the bottom

[archlinuxfr]
SigLevel = Never
Server = http://repo.archlinux.fr/$arch

Sync pacman to retrieve latest package information

sudo pacman -Sy

Build and install yay package manager tool in order to install AUR packages

If you prefer another AUR/pacman tool, feel free to replace this step and yay with that tool.

# Build yay package and install
git clone https://aur.archlinux.org/yay.git
cd yay
makepkg -si

# After install, remove the yay build folder
cd ..; rm -rf yay

# Sync yay
yay -Sy

Additional timezone setup

tzselect is an interactive utility. Upon running the following command, choose your region and timezone.

sudo tzselect

thermald

thermald protects your Pocket 2 from overheating.

# Install
yay -S thermald

# Enable + start
sudo systemctl enable thermald.service
sudo systemctl start thermald.service

NetworkManager

# Install
yay -S networkmanager network-manager-applet nm-connection-editor

# Enable + start
sudo systemctl enable NetworkManager
sudo systemctl start NetworkManager

nmtui is a command-line utility which allows selection of a network. Note: Because wifi-menu was used, and a wifi network has already been selected, nmtui might fail or error. Upon next reboot, nmtui should be available (or just use the applet in Xorg).

nmtui

Sound

# Install pulseaudio packages
yay -S pulseaudio pulseaudio-alsa pulseaudio-bluetooth pulseaudio-ctl

# (optional) Install nice traybar utils to work with audio
yay -S pasystray-gtk3-standalone pavucontrol

Bluetooth

# Install
yay -S bluez bluez-utils bluez-tools

# Enable + start
sudo systemctl enable bluetooth
sudo systemctl start bluetooth

# (optional) Install nice traybar utils
yay -S blueman blueberry

TLP

TLP helps reduce power by setting some sane power defaults.

# Install
yay -S tlp

# Enable + start
sudo systemctl enable tlp
sudo systemctl start tlp

Xorg

Install Xorg packages

yay -S xorg-server xorg-xev xorg-xinit xorg-xkill xorg-xmodmap xorg-xprop xorg-xrandr xorg-xrdb xorg-xset xinit-xsession

Create Pocket 2 Xorg configs

Create Intel xorg config at /etc/X11/xorg.conf.d/20-intel.conf with the following:

Section "Device"
  Identifier    "Intel Graphics"
  Driver        "intel"
  Option        "AccelMethod"            "sna"
  Option        "TearFree"               "true"
  Option        "DRI"                    "3"
EndSection

Create display config at /etc/X11/xorg.conf.d/30-display.conf with the following:

Section "Monitor"
  Identifier    "eDP1"
  Option        "Rotate"                 "right"
EndSection

Create touchscreen config at /etc/X11/xorg.conf.d/99-touchscreen.conf with the following:

Section "InputClass"
  Identifier    "calibration"
  MatchProduct  "Goodix Capacitive TouchScreen"
  Option        "TransformationMatrix"   "0 1 0 -1 0 1 0 0 1"
EndSection

Install Intel video drivers

yay -S xf86-video-intel

XFCE4

yay -S xfce4 xfce4-goodies
# hit enter to install all the goodies

Create ~/.xinitrc

# Simple hack to allow mouse scrolling when right click button is held down
xinput --set-prop pointer:"HAILUCK CO.,LTD USB KEYBOARD Mouse" "libinput Middle Emulation Enabled" 1
xinput --set-prop pointer:"HAILUCK CO.,LTD USB KEYBOARD Mouse" "libinput Button Scrolling Button" 3
xinput --set-prop pointer:"HAILUCK CO.,LTD USB KEYBOARD Mouse" "libinput Scroll Method Enabled" 0 0 1

# Start XFCE4
(xset s 120) & exec startxfce4

Start X

startx

About

Guide to installing Arch Linux on the GPD Pocket 2

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published