cjdns

Русская версия Hrvatski Svenska

Networking Reinvented

Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Testimonials

23:26 <@jercos> well, cjdns is now officially more reliable than the open
                internet for getting to my cheaper VPSes :|

12:52 < mariner> so i don't know if it's been done before, and i assume it's
                 obvious, but I think it's neat. Currently on hype from an
                 airplane

00:36 < tester> man sites take so long to load on i2p
00:36 < tester> i value speed over anonymity any day

<DuoNoxSol> it's notably more reliable than the normal internet

09:46 < Kubuxu> I so love cjdns code base

<whyrusleeping> my internet is way better now.
​<whyrusleeping> thanks
<whyrusleeping> i'm really upset and sad that its better
<whyrusleeping> but also quite happy

Community

• irc://irc.efnet.org/#cjdns
• Hyperboria the largest cjdns network, as of October 2015 there are 2100 nodes.
• Project Meshnet
• /r/darknetplan
• #cjdns on Twitter

Documentation

• Project Goals
• Cjdns Whitepaper
• Cjdns on Wikipedia

Advanced configuration:

• Setup a cjdns NAT gateway for your LAN
• Install cjdns on OpenIndiana

Thank you for your time and interest,

The cjdns developers.

---

How to install cjdns

These instructions are for Debian-based Linux distributions and OS X. They should be informative enough for use on other distributions - just don't expect them to work verbatim.

0. Install dependencies

On both platforms, installing Node.js, although preferable, is not strictly necessary. If Node.js is unavailable or an unacceptable version, it will be downloaded and installed in the source tree.

Debian-based distro:

sudo apt-get install nodejs git build-essential

Fedora 22+ based distro:

sudo dnf install install nodejs git
sudo dnf install @development-tools

RHEL based distro (adds the EPEL repo):

sudo yum localinstall https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
sudo yum install install nodejs git
sudo yum install @development-tools

OS X:

Install with homebrew:

brew install cjdns

OpenBSD:

Sadly, OpenBSD is a bit experimental right now.

pkg_add git node gcc gmake bash

Select version gcc-4.8.1p2 or more recent.

FreeBSD:

Everything you need is available prebuild in FreeBSD' ports.

pkg install gmake node

1. Retrieve cjdns from GitHub

Clone the repository from GitHub and change to the source directory:

git clone https://github.com/cjdelisle/cjdns.git cjdns
cd cjdns

2. Build

./do

Look for Build completed successfully, type ./cjdroute to begin setup., then proceed below:

---

Setup

Run cjdroute without options for HELP:

./cjdroute

0. Make sure you've got the stuff.

cat /dev/net/tun

If it says: cat: /dev/net/tun: File descriptor in bad state Good!

If it says: cat: /dev/net/tun: No such file or directory, create it using:

sudo mkdir -p /dev/net &&
sudo mknod /dev/net/tun c 10 200 &&
sudo chmod 0666 /dev/net/tun

Then cat /dev/net/tun again.

If it says: cat: /dev/net/tun: Permission denied You're probably using a VPS based on the OpenVZ virtualization platform. Ask your provider to enable the TUN/TAP device - this is standard protocol so they should know exactly what you need. If you're on OS X, don't worry about this step.

1. Generate a new configuration file

./cjdroute --genconf >> cjdroute.conf

Protect your conf file!

A lost conf file means you lost your password and connections and anyone who connected to you will no longer be able to connect. A compromised conf file means that other people can impersonate you on the network.

To generate a conf file with permissions set so that only your user can read it and write to it:

(umask 077 && ./cjdroute --genconf > cjdroute.conf)

2. Find a friend

To get into an existing network (e.g. Hyperboria), you need to connect to someone who is already in the network. This is required for a number of reasons:

1. It helps prevent abuse because bad people will be less likely to abuse a system after they were, in an act of human kindness, given access to that system.
2. This is not intended to overlay The Old Internet, it is intended to replace it. Each connection will in due time be replaced by a wire, a fiber optic cable, or a wireless network connection.
3. In any case of a disagreement, there will be a "chain of friends" linking the people involved so there will already be a basis for coming to a resolution.

To find a friend, get out there and join our community. Also, have a look at the Hyperboria Map to find peers near you.

3. Connect your node to your friend's node

To initiate the connection OUTbound

In your conf file, you will see:

// Nodes to connect to.
"connectTo":
{
    // Add connection credentials here to join the network
    // Ask somebody who is already connected.
}

A conf file with multiple friend-nodes, setup OUTbound, should look like:

// Nodes to connect to.
"connectTo":
{
    //friend_1 (IPv4: 0.1.2.3; IPv6 fcaa:5bac:66e4:713:cb00:e446:c317:fc39)
    "0.1.2.3:45678":
    {
        "login": "k.alexander"
        "password": "thisIsNotARealConnection_1",
        "publicKey": "thisIsJustForAnExampleDoNotUseThisInYourConfFile_1.k"
    }

    //friend_2 (IPv4: 5.1.2.3; IPv6 fcbb:5bac:66e4:713:cb00:e446:c317:fc39)
    "5.1.2.3:5678":
    {
        "login": "k.alexander"
        "password": "thisIsNotARealConnection_2",
        "publicKey": "thisIsJustForAnExampleDoNotUseThisInYourConfFile_2.k"
    }
}

You can add as many connections as you want to the connectTo attribute, following JSON syntax.

To allow your friend to initiate the connection INbound

In your conf file, you will see:

"authorizedPasswords":
[
    // A unique string which is known to the client and server.
    {"password": "thisisauniquestring_001"}

    // More passwords should look like this.
    // {"password": "thisisauniquestring_002"}
    // {"password": "thisisauniquestring_003"}
    // {"password": "thisisauniquestring_004"}
    ...

    // "your.external.ip.goes.here:45678":{"password": "thisisauniquestring_001","publicKey":thisisauniqueKEY_001.k"}

],

A conf file with multiple friend-nodes, setup INbound, should look like:

"authorizedPasswords":
[
    // A unique string which is known to the client and server.
    {"password": "thisisauniquestring_001", "user": "k.alexander"}

    // More passwords should look like this.
    //William Jevons (IPv4: 0.1.2.3; IPv6 fcaa:5bac:66e4:713:cb00:e446:c317:fc39)
    {"password": "thisisauniquestring_002", "user": "William Jevons"}
    //Marilyn Patel (IPv4: 5.1.2.3; IPv6 fcbb:5bac:66e4:713:cb00:e446:c317:fc39)
    {"password": "thisisauniquestring_003", "user": "Marilyn Patel"}
    // {"password": "thisisauniquestring_004"}
    ...

    // "your.external.ip.goes.here:45678":{"password": "thisisauniquestring_001","publicKey":thisisauniqueKEY_001.k"}
],

You need to give William Jevons (who is making the INbound connection) the following 4 items:

1. Your external IPv4

2. The port found in your conf file here:

   // Bind to this port. "bind": "0.0.0.0:yourportnumberishere",

3. Their unique password that you uncommented or created: "password": "thisisauniquestring_002"

4. Your public key: "publicKey": "thisisauniqueKEY_001.k"

5. His username: "William Jevons"

His login credentials will look something like this (with your IPv4 and port):

"1.2.3.4:56789": {
    "login": "William Jevons",
    "password": "thisisauniquestring_002",
    "publicKey": "thisIsJustForAnExampleDoNotUseThisInYourConfFile_1.k"
}

Please note that you and your friend can initiate a connection either outbound (from YOU --> FRIEND) or inbound (from FRIEND --> YOU) but traffic flows both ways once the connection is established.

See doc/configure.md for more details on configuration, including how to peer with other cjdns nodes over ethernet and wifi.

4. Secure your system - check for listening services

Once your node is running, you're now a newly minted IPv6 host. Your operating system may automatically reconfigure network services to use this new address. If this is not what you intend, you should check to see that you are not offering more services then you intended to. ;)

See doc/network-services.md for instructions.

5. Start it up!

sudo ./cjdroute < cjdroute.conf

If you want to have your logs written to a file:

sudo ./cjdroute < cjdroute.conf > cjdroute.log

To stop cjdns:

sudo killall cjdroute

If you are having problems use killall cjdroute to return to sanity. Use pgrep cjdroute or top to see if it running.

NOTE!

This starts cjdns as the root user so it can configure your system without concern for permissions. To start cjdns as a non-root user, see doc/non-root-user.md.

6. Get in IRC

Welcome to the network! You're now a network administrator. There are responsibilities which come with being a network administrator which include being available in case there is something wrong with your equipment. You should stay on IRC so that people can reach you.

Admin interface

When cjdroute is up and running, the admin interface will be available at udp://localhost:11234 (this can be changed in the cjdroute.conf configuration file). See doc/admin-api.md for more information about the admin interface. There are several tools in contrib/ that can interact with it.

You can access the admin API with:

• the Python library; see here.
• the Perl library, maintained by Mikey; see here.