lldpd: implementation of IEEE 802.1ab (LLDP)

https://lldpd.github.io/

Features

LLDP (Link Layer Discovery Protocol) is an industry standard protocol designed to supplant proprietary Link-Layer protocols such as Extreme's EDP (Extreme Discovery Protocol) and CDP (Cisco Discovery Protocol). The goal of LLDP is to provide an inter-vendor compatible mechanism to deliver Link-Layer notifications to adjacent network devices.

lldpd implements both reception and sending. It also implements an SNMP subagent for net-snmp to get local and remote LLDP information. The LLDP-MIB is partially implemented but the most useful tables are here. lldpd also partially implements LLDP-MED.

lldpd supports bridge, vlan and bonding.

The following OS are supported:

FreeBSD
GNU/Linux
macOS
NetBSD
OpenBSD
Solaris

Windows is not supported but you can use WinLLDPService as a transmit-only agent.

Installation

For general instructions prefer the website, including building from released tarballs.

To compile lldpd from Git, use the following commands:

./autogen.sh
./configure
make
sudo make install

lldpd uses privilege separation to increase its security. Two processes, one running as root and doing minimal stuff and the other running as an unprivileged user into a chroot doing most of the stuff, are cooperating. You need to create a user called _lldpd in a group _lldpd (this can be change with ./configure). You also need to create an empty directory /usr/local/var/run/lldpd (it needs to be owned by root, not _lldpd!). If you get fuzzy timestamps from syslog, copy /etc/locatime into the chroot.

lldpcli lets one query information collected through the command line. If you don't want to run it as root, just install it setuid or setgid _lldpd.

Installation (Docker)

You can use Docker to run lldpd:

docker run --rm --net=host --uts=host \
           -v /etc/os-release:/etc/os-release \
           --cap-add=NET_RAW --cap-add=NET_ADMIN \
           --name lldpd \
           ghcr.io/lldpd/lldpd:latest

In place of latest which provides you with the latest stable version, you may use 1, 1.0, 1.0.12 to match specific versions, or master to get the development version.

To execute lldpcli, use:

docker exec lldpd lldpcli show neighbors

Or to get the command-line:

docker exec -it lldpd lldpcli

Installation (macOS)

The same procedure as above applies for macOS. However, there are simpler alternatives:

Use Homebrew:

brew install lldpd
# Or, for the latest version:
brew install https://raw.github.com/lldpd/lldpd/master/osx/lldpd.rb

Build an macOS installer package which should work on the same version of macOS (it is important to use a separate build directory):

mkdir build && cd build
../configure --prefix=/usr/local --localstatedir=/var --sysconfdir=/private/etc --with-embedded-libevent \
   --without-snmp
make -C osx pkg

If you want to compile for an older version of OS X, you need commands like:

mkdir build && cd build
../configure --prefix=/usr/local --localstatedir=/var --sysconfdir=/private/etc --with-embedded-libevent \
   --without-snmp \
   CFLAGS="-mmacosx-version-min=11.1" \
   LDFLAGS="-mmacosx-version-min=11.1"
make -C osx pkg

You can check with otool -l that you got what you expected in term of supported versions. If you are running on ARM64, you can configure a binary supporting both architectures by adding ARCHS="arm64 x86_64" to the arguments of the make command.

If you don't follow the above procedures, you will have to create the user/group _lldpd. Have a look at how this is done in osx/scripts/postinstall.

Installation (Android)

Don't clone the repo or download the master branch from GitHub. Instead, download the official release from the website https://lldpd.github.io/. Unpack into a working directory.
Download the Android NDK (version 22 or later). Unpack into a working directory next to the lldpd directory.
Install automake, libtool, and pkg-config. (sudo apt-get install automake libtool pkg-config)
In the root of the lldpd directory, make a compile.sh file containing this script:

export TOOLCHAIN=$PWD/android-ndk/toolchains/llvm/prebuilt/linux-x86_64
export TARGET=armv7a-linux-androideabi
export API=30
# DO NOT TOUCH BELOW
export AR=$TOOLCHAIN/bin/llvm-ar
export CC=$TOOLCHAIN/bin/$TARGET$API-clang
export CXX=$TOOLCHAIN/bin/$TARGET$API-clang++
export LD=$TOOLCHAIN/bin/ld
export RANLIB=$TOOLCHAIN/bin/llvm-ranlib
export STRIP=$TOOLCHAIN/bin/llvm-strip
export AS=$CC
./autogen.sh
mkdir -p build && cd build
../configure \
    --host=$TARGET \
    --with-sysroot=$TOOLCHAIN/sysroot \
    --prefix=/system \
    --sbindir=/system/bin \
    --runstatedir=/data/data/lldpd \
    --with-privsep-user=root \
    --with-privsep-group=root \
    PKG_CONFIG=/bin/false
make
make install DESTDIR=$PWD/install

In the Android NDK directory, locate the toolchains/llvm/prebuilt/linux-x86_64 directory and change the TOOLCHAIN variable of the above script to match the path where the linux-x86_64 directory resides.

export TOOLCHAIN=$PWD/android-ndk-r22b-linux-x86_64/android-ndk-r22b/toolchains/llvm/prebuilt/linux-x86_64

Determine the CPU architecture target (adb shell getprop ro.product.cpu.abi). Change the TARGET variable in the above script to match the target architecture. The target name will not exactly match the output of the adb command as there will be a trailing suffix to the target name, so look in the linux-x86_64/bin directory for the clang file that starts with the CPU architecture target. Don't include the API version in the target name.

$ adb shell getprop ro.product.cpu.abi
armeabi-v7a

linux-x86_64/bin$ ls *-clang
aarch64-linux-android21-clang     armv7a-linux-androideabi23-clang  i686-linux-android26-clang
aarch64-linux-android22-clang     armv7a-linux-androideabi24-clang  i686-linux-android27-clang
aarch64-linux-android23-clang     armv7a-linux-androideabi26-clang  i686-linux-android28-clang
aarch64-linux-android24-clang     armv7a-linux-androideabi27-clang  i686-linux-android29-clang
aarch64-linux-android26-clang     armv7a-linux-androideabi28-clang  i686-linux-android30-clang
aarch64-linux-android27-clang     armv7a-linux-androideabi29-clang  x86_64-linux-android21-clang
aarch64-linux-android28-clang     armv7a-linux-androideabi30-clang  x86_64-linux-android22-clang
aarch64-linux-android29-clang     i686-linux-android16-clang        x86_64-linux-android23-clang
aarch64-linux-android30-clang     i686-linux-android17-clang        x86_64-linux-android24-clang
armv7a-linux-androideabi16-clang  i686-linux-android18-clang        x86_64-linux-android26-clang
armv7a-linux-androideabi17-clang  i686-linux-android19-clang        x86_64-linux-android27-clang
armv7a-linux-androideabi18-clang  i686-linux-android21-clang        x86_64-linux-android28-clang
armv7a-linux-androideabi19-clang  i686-linux-android22-clang        x86_64-linux-android29-clang
armv7a-linux-androideabi21-clang  i686-linux-android23-clang        x86_64-linux-android30-clang
armv7a-linux-androideabi22-clang  i686-linux-android24-clang

export TARGET=armv7a-linux-androideabi

Set the API variable in the script above to your target API version. Check in the same linux-x86_64/bin to ensure the API you are targeting has a supported clang file for that CPU architecture and version. As of this writing, there is support for API 21-30 included for all architectures and some CPU architectures supported back to version 16.

export API=30

Run the compile script (./compile.sh).
Copy the ./bin/* and ./lib/*.so files from lldpd/build/install/system to the target system (./bin/* to /system/bin, ./lib/*.so to /system/lib64):

# Push files to target
cd build/install/system
adb shell mkdir -p /sdcard/Download/lldpd/bin
adb push bin/lldpcli /sdcard/Download/lldpd/bin/lldpcli
adb push bin/lldpd /sdcard/Download/lldpd/bin/lldpd
adb shell mkdir -p /sdcard/Download/lldpd/lib64
adb push lib/liblldpctl.so /sdcard/Download/lldpd/lib64/liblldpctl.so

# Enter target shell and move files
adb shell

# Run as root for all commands
su
# Make /system writeable
mount -o rw,remount /system
mv /sdcard/Download/lldpd/bin/lldpcli /system/bin/lldpcli
chmod 755 /system/bin/lldpcli
chown root:shell /system/bin/lldpcli
mv /sdcard/Download/lldpd/bin/lldpd /system/bin/lldpd
chmod 755 /system/bin/lldpd
chown root:shell /system/bin/lldpd
chmod 755 /system/bin/lldpctl
chown root:shell /system/bin/lldpctl
mv /sdcard/Download/lldpd/lib64/liblldpctl.so /system/lib64/liblldpctl.so
chmod 644 /system/lib64/liblldpctl.so
chown root:root /system/lib64/liblldpctl.so
# Make /system readonly again
mount -o ro,remount /system
# Might not be necessary on some systems
mkdir /data/data/lldpd
chmod 700 /data/data/lldpd
chown shell:shell /data/data/lldpd
# Clean up
rm -rf /sdcard/Download/lldpd

Usage

lldpd also implements CDP (Cisco Discovery Protocol), FDP (Foundry Discovery Protocol), SONMP (Nortel Discovery Protocol) and EDP (Extreme Discovery Protocol). However, recent versions of IOS should support LLDP and most Extreme stuff support LLDP. When a EDP, CDP or SONMP frame is received on a given interface, lldpd starts sending EDP, CDP, FDP or SONMP frame on this interface. Informations collected through EDP/CDP/FDP/SONMP are integrated with other informations and can be queried with lldpcli or through SNMP.

More information:

Compatibility with older kernels

If you have a kernel older than Linux 4.0, you need to compile lldpd with --enable-oldies to enable some compatibility functions: otherwise, lldpd will only rely on Netlink to receive wireless, bridge, bond and VLAN information.

For bonding, you need 2.6.24 (in previous version, PACKET_ORIGDEV affected only non multicast packets). See:

Otherwise, a packet received on a bond will be affected to all interfaces of the bond. In this case, lldpd will affect a received randomly to one of the interface (so a neighbor may be affected to the wrong interface).

On 2.6.27, we are able to receive packets on real interface for enslaved devices. This allows one to get neighbor information on active/backup bonds. Without the 2.6.27, lldpd won't receive any information on inactive slaves. Here are the patchs (thanks to Joe Eykholt):

On FreeBSD, only a recent 9 kernel (9.1 or more recent) will allow to send LLDP frames on enslaved devices. See this bug report for more information:

http://www.freebsd.org/cgi/query-pr.cgi?pr=138620

Some devices (notably Cisco IOS) send frames tagged with the native VLAN while they should send them untagged. If your network card does not support accelerated VLAN, you will receive those frames as long as the corresponding interface exists (see below). However, if your network card handles VLAN encapsulation/decapsulation (check with ethtool -k), you need a recent kernel to be able to receive those frames without listening on all available VLAN. Starting from Linux 2.6.27, lldpd is able to capture VLAN frames when VLAN acceleration is supported by the network card. Here is the patch:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bc1d0411b804ad190cdadabac48a10067f17b9e6

On some other versions, frames are sent on VLAN 1. If this is not the native VLAN and if your network card support accelerated VLAN, you need to subscribe to this VLAN as well. The Linux kernel does not provide any interface for this. The easiest way is to create the VLAN for each port:

ip link add link eth0 name eth0.1 type vlan id 1
ip link set up dev eth0.1

You can check both cases using tcpdump:

tcpdump -epni eth0 ether host 01:80:c2:00:00:0e
tcpdump -eni eth0 ether host 01:80:c2:00:00:0e

If the first command does not display received LLDP packets but the second one does, LLDP packets are likely encapsulated into a VLAN:

10:54:06.431154 f0:29:29:1d:7c:01 > 01:80:c2:00:00:0e, ethertype 802.1Q (0x8100), length 363: vlan 1, p 7, ethertype LLDP, LLDP, name SW-APP-D07.VTY, length 345

In this case, just create VLAN 1 will fix the situation. There are other solutions:

Disable VLAN acceleration on the receive side (ethtool -K eth0 rxvlan off) but this may or may not work. Check if there are similar properties that could apply with ethtool -k eth0.
Put the interface in promiscuous mode with ip link set promisc on dev eth0.

The last solution can be done directly by lldpd (on Linux only) by using the option configure system interface promiscuous.

On modern networks, the performance impact should be nonexistent.

Development

During development, you may want to execute lldpd at its current location instead of doing make install. The correct way to do this is to issue the following command:

sudo libtool execute src/daemon/lldpd -L $PWD/src/client/lldpcli -d

You can append any further arguments. If lldpd is unable to find lldpcli it will start in an unconfigured mode and won't send or accept LLDP frames.

There is a general test suite with make check. It's also possible to run integration tests. They need pytest and rely on Linux containers to be executed.

To enable code coverage, use:

../configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var \
             --enable-sanitizers --enable-gcov --with-snmp \
             CFLAGS="-O0 -g"
make
make check
# maybe, run integration tests
lcov --base-directory $PWD/src/lib \
     --directory src --capture --output-file gcov.info
genhtml gcov.info --output-directory coverage

Fuzzing

With libfuzzer

Using address sanitizer:

export CC=clang
export CFLAGS="-O1 -fno-omit-frame-pointer -gline-tables-only -fsanitize=address -fsanitize-address-use-after-scope -fsanitize=fuzzer-no-link"
export LIB_FUZZING_ENGINE="-fsanitize=fuzzer"

Using undefined-behaviour sanitizer:

export CC=clang
export CFLAGS="-O1 -fno-omit-frame-pointer -gline-tables-only -fsanitize=array-bounds,bool,builtin,enum,float-divide-by-zero,function,integer-divide-by-zero,null,object-size,return,returns-nonnull-attribute,shift,signed-integer-overflow,unsigned-integer-overflow,unreachable,vla-bound,vptr -fno-sanitize-recover=array-bounds,bool,builtin,enum,float-divide-by-zero,function,integer-divide-by-zero,null,object-size,return,returns-nonnull-attribute,shift,signed-integer-overflow,unreachable,vla-bound,vptr -fsanitize=fuzzer-no-link"
export LIB_FUZZING_ENGINE="-fsanitize=fuzzer"

Using memory sanitizer:

export CC=clang
export CFLAGS="-O1 -fno-omit-frame-pointer -gline-tables-only -fsanitize=memory -fsanitize-memory-track-origins -fsanitize=fuzzer-no-link"
export LIB_FUZZING_ENGINE="-fsanitize=fuzzer"

Build and run:

./configure --disable-shared --enable-pie --enable-fuzzer=$LIB_FUZZING_ENGINE
make
cd tests/
./fuzz_cdp   fuzzing_seed_corpus/fuzz_cdp_seed_corpus
./fuzz_edp   fuzzing_seed_corpus/fuzz_edp_seed_corpus
./fuzz_lldp  fuzzing_seed_corpus/fuzz_lldp_seed_corpus
./fuzz_sonmp fuzzing_seed_corpus/fuzz_sonmp_seed_corpus

With AFL++

You can use AFL++ to test some other aspects of lldpd. To test frame decoding:

export CC=afl-clang-fast
./configure --disable-shared --enable-pie
make clean check
cd tests
mkdir inputs
mv *.pcap inputs
afl-fuzz -i inputs -o outputs ./decode @@

Embedding

To embed lldpd into an existing system, there are two points of entry:

If your system does not use standard Linux interface, you can support additional interfaces by implementing the appropriate struct lldpd_ops. You can look at src/daemon/interfaces-linux.c for examples. Also, have a look at interfaces_update() which is responsible for discovering and registering interfaces.
lldpcli provides a convenient way to query lldpd. It also comes with various outputs, including XML which allows one to parse its output for integration and automation purpose. Another way is to use SNMP support. A third way is to write your own controller using liblldpctl.so. Its API is described in src/lib/lldpctl.h. The custom binary protocol between liblldpctl.so and lldpd is not stable. Therefore, the library should always be shipped with lldpd. On the other hand, programs using liblldpctl.so can rely on the classic ABI rules.

Troubleshooting

You can use tcpdump to capture the packets received and sent by lldpd. To capture LLDPU, use:

tcpdump -s0 -vv -pni eth0 ether dst 01:80:c2:00:00:0e

Intel X710 cards may handle LLDP themselves, intercepting any incoming packets. If you don't see anything through tcpdump, check if you have such a card (with lspci) and stop the embedded LLDP daemon:

for f in /sys/kernel/debug/i40e/*/command; do
    echo lldp stop > $f
done

On FreeBSD, use sysctl stop the embedded LLDP daemon:

for oid in $(sysctl -Nq dev.ixl | grep fw_lldp); do
    sysctl $oid=0
done

This may also apply to the ice (Intel E8xx cards) driver. These steps are not necessary with a recent version of lldpd (1.0.11+ for Linux, 1.0.19+ for FreeBSD).

License

lldpd is distributed under the ISC license:

Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Also, lldpcli will be linked to GNU Readline (which is GPL licensed) if available. To avoid this, use --without-readline as a configure option.

Name		Name	Last commit message	Last commit date
Latest commit History 2,327 Commits
.github		.github
debian		debian
include		include
libevent @ 5df3037		libevent @ 5df3037
m4		m4
osx		osx
redhat		redhat
src		src
tests		tests
.clang-format		.clang-format
.dir-locals.el		.dir-locals.el
.dockerignore		.dockerignore
.git-blame-ignore-revs		.git-blame-ignore-revs
.gitignore		.gitignore
.gitmodules		.gitmodules
CONTRIBUTE.md		CONTRIBUTE.md
Dockerfile		Dockerfile
LICENSE		LICENSE
Makefile.am		Makefile.am
NEWS		NEWS
README.md		README.md
autogen.sh		autogen.sh
configure.ac		configure.ac
doxygen.am		doxygen.am
doxygen.cfg		doxygen.cfg
edit.am		edit.am
flake.lock		flake.lock
flake.nix		flake.nix
get-version		get-version

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

lldpd: implementation of IEEE 802.1ab (LLDP)

Features

Installation

Installation (Docker)

Installation (macOS)

Installation (Android)

Usage

Compatibility with older kernels

Development

Fuzzing

With libfuzzer

With AFL++

Embedding

Troubleshooting

License

About

Releases 16

Sponsor this project

Packages

Contributors 55

Languages

License

lldpd/lldpd

Folders and files

Latest commit

History

Repository files navigation

lldpd: implementation of IEEE 802.1ab (LLDP)

Features

Installation

Installation (Docker)

Installation (macOS)

Installation (Android)

Usage

Compatibility with older kernels

Development

Fuzzing

With libfuzzer

With AFL++

Embedding

Troubleshooting

License

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 16

Sponsor this project

Packages 0

Contributors 55

Languages

Packages