🚫💩 lint-staged

Run linters against staged git files and don't let 💩 slip into your code base!

Why

Linting makes more sense when run before committing your code. By doing so you can ensure no errors go into the repository and enforce code style. But running a lint process on a whole project is slow, and linting results can be irrelevant. Ultimately you only want to lint files that will be committed.

This project contains a script that will run arbitrary shell tasks with a list of staged files as an argument, filtered by a specified glob pattern.

Installation and setup

The fastest way to start using lint-staged is to run the following command in your terminal:

npx mrm@2 lint-staged

This command will install and configure husky and lint-staged depending on the code quality tools from your project's package.json dependencies, so please make sure you install (npm install --save-dev) and configure all code quality tools like Prettier and ESLint prior to that.

Don't forget to commit changes to package.json and .husky to share this setup with your team!

Now change a few files, git add or git add --patch some of them to your commit, and try to git commit them.

See examples and configuration for more information.

Changelog

See Releases.

Migration

v12

Since v12.0.0 lint-staged is a pure ESM module, so make sure your Node.js version is at least 12.20.0, 14.13.1, or 16.0.0. Read more about ESM modules from the official Node.js Documentation site here.

v10

From v10.0.0 onwards any new modifications to originally staged files will be automatically added to the commit. If your task previously contained a git add step, please remove this. The automatic behaviour ensures there are less race-conditions, since trying to run multiple git operations at the same time usually results in an error.
From v10.0.0 onwards, lint-staged uses git stashes to improve speed and provide backups while running. Since git stashes require at least an initial commit, you shouldn't run lint-staged in an empty repo.
From v10.0.0 onwards, lint-staged requires Node.js version 10.13.0 or later.
From v10.0.0 onwards, lint-staged will abort the commit if linter tasks undo all staged changes. To allow creating an empty commit, please use the --allow-empty option.

Command line flags

❯ npx lint-staged --help
Usage: lint-staged [options]

Options:
  -V, --version                      output the version number
  --allow-empty                      allow empty commits when tasks revert all staged changes
                                     (default: false)
  -c, --config [path]                path to configuration file, or - to read from stdin
  -d, --debug                        print additional debug information (default: false)
  --no-stash                         disable the backup stash, and do not revert in case of
                                     errors
  -p, --concurrent <parallel tasks>  the number of tasks to run concurrently, or false to run
                                     tasks serially (default: true)
  -q, --quiet                        disable lint-staged’s own console output (default: false)
  -r, --relative                     pass relative filepaths to tasks (default: false)
  -x, --shell [path]                 skip parsing of tasks for better shell support (default:
                                     false)
  -v, --verbose                      show task output even when tasks succeed; by default only
                                     failed output is shown (default: false)
  -h, --help                         display help for command

--allow-empty: By default, when linter tasks undo all staged changes, lint-staged will exit with an error and abort the commit. Use this flag to allow creating empty git commits.
--config [path]: Manually specify a path to a config file or npm package name. Note: when used, lint-staged won't perform the config file search and will print an error if the specified file cannot be found. If '-' is provided as the filename then the config will be read from stdin, allowing piping in the config like cat my-config.json | npx lint-staged --config -.
--debug: Run in debug mode. When set, it does the following:
- uses debug internally to log additional information about staged files, commands being executed, location of binaries, etc. Debug logs, which are automatically enabled by passing the flag, can also be enabled by setting the environment variable $DEBUG to lint-staged*.
- uses verbose renderer for listr; this causes serial, uncoloured output to the terminal, instead of the default (beautified, dynamic) output.
--concurrent [number | (true/false)]: Controls the concurrency of tasks being run by lint-staged. NOTE: This does NOT affect the concurrency of subtasks (they will always be run sequentially). Possible values are:
- false: Run all tasks serially
- true (default) : Infinite concurrency. Runs as many tasks in parallel as possible.
- {number}: Run the specified number of tasks in parallel, where 1 is equivalent to false.
--no-stash: By default a backup stash will be created before running the tasks, and all task modifications will be reverted in case of an error. This option will disable creating the stash, and instead leave all modifications in the index when aborting the commit.
--quiet: Supress all CLI output, except from tasks.
--relative: Pass filepaths relative to process.cwd() (where lint-staged runs) to tasks. Default is false.
--shell: By default linter commands will be parsed for speed and security. This has the side-effect that regular shell scripts might not work as expected. You can skip parsing of commands with this option. To use a specific shell, use a path like --shell "/bin/bash".
--verbose: Show task output even when tasks succeed. By default only failed output is shown.

Configuration

Starting with v3.1 you can now use different ways of configuring lint-staged:

lint-staged object in your package.json
.lintstagedrc file in JSON or YML format, or you can be explicit with the file extension:
- .lintstagedrc.json
- .lintstagedrc.yaml
- .lintstagedrc.yml
lint-staged.config.js, .lintstagedrc.js, or .lintstagedrc.cjs file in JS format
Pass a configuration file using the --config or -c flag

See cosmiconfig for more details on what formats are supported.

Configuration should be an object where each value is a command to run and its key is a glob pattern to use for this command. This package uses micromatch for glob patterns.

`package.json` example:

{
  "lint-staged": {
    "*": "your-cmd"
  }
}

`.lintstagedrc` example

{
  "*": "your-cmd"
}

This config will execute your-cmd with the list of currently staged files passed as arguments.

So, considering you did git add file1.ext file2.ext, lint-staged will run the following command:

your-cmd file1.ext file2.ext

Filtering files

Linter commands work on a subset of all staged files, defined by a glob pattern. lint-staged uses micromatch for matching files with the following rules:

If the glob pattern contains no slashes (/), micromatch's matchBase option will enabled, so globs match a file's basename regardless of directory:
- "*.js" will match all JS files, like /test.js and /foo/bar/test.js
- "!(*test).js". will match all JS files, except those ending in test.js, so foo.js but not foo.test.js
If the glob pattern does contain a slash (/), it will match for paths as well:
- "./*.js" will match all JS files in the git repo root, so /test.js but not /foo/bar/test.js
- "foo/**/\*.js" will match all JS files inside the/foodirectory, so/foo/bar/test.jsbut not/test.js

When matching, lint-staged will do the following

Resolve the git root automatically, no configuration needed.
Pick the staged files which are present inside the project directory.
Filter them using the specified glob patterns.
Pass absolute paths to the linters as arguments.

NOTE: lint-staged will pass absolute paths to the linters to avoid any confusion in case they're executed in a different working directory (i.e. when your .git directory isn't the same as your package.json directory).

Also see How to use lint-staged in a multi-package monorepo?

Ignoring files

The concept of lint-staged is to run configured linter tasks (or other tasks) on files that are staged in git. lint-staged will always pass a list of all staged files to the task, and ignoring any files should be configured in the task itself.

Consider a project that uses prettier to keep code format consistent across all files. The project also stores minified 3rd-party vendor libraries in the vendor/ directory. To keep prettier from throwing errors on these files, the vendor directory should be added to prettier's ignore configuration, the .prettierignore file. Running npx prettier . will ignore the entire vendor directory, throwing no errors. When lint-staged is added to the project and configured to run prettier, all modified and staged files in the vendor directory will be ignored by prettier, even though it receives them as input.

In advanced scenarios, where it is impossible to configure the linter task itself to ignore files, but some staged files should still be ignored by lint-staged, it is possible to filter filepaths before passing them to tasks by using the function syntax. See Example: Ignore files from match.

What commands are supported?

Supported are any executables installed locally or globally via npm as well as any executable from your $PATH.

Using globally installed scripts is discouraged, since lint-staged may not work for someone who doesn't have it installed.

lint-staged uses execa to locate locally installed scripts. So in your .lintstagedrc you can write:

{
  "*.js": "eslint --fix"
}

Pass arguments to your commands separated by space as you would do in the shell. See examples below.

Running multiple commands in a sequence

You can run multiple commands in a sequence on every glob. To do so, pass an array of commands instead of a single one. This is useful for running autoformatting tools like eslint --fix or stylefmt but can be used for any arbitrary sequences.

For example:

{
  "*.js": ["eslint", "prettier --write"]
}

going to execute eslint and if it exits with 0 code, it will execute prettier --write on all staged *.js files.

Using JS configuration file

Writing the configuration file in JavaScript is the most powerful way to configure lint-staged (lint-staged.config.js, similar, or passed via --config). From the configuration file, you can export either a single function or an object.

If the exports value is a function, it will receive an array of all staged filenames. You can then build your own matchers for the files and return a command string or an array of command strings. These strings are considered complete and should include the filename arguments, if wanted.

If the exports value is an object, its keys should be glob matches (like in the normal non-js config format). The values can either be like in the normal config or individual functions like described above. Instead of receiving all matched files, the functions in the exported object will only receive the staged files matching the corresponding glob key.

Function signature

The function can also be async:

(filenames: string[]) => string | string[] | Promise<string | string[]>

Example: Export a function to build your own matchers

Click to expand

// lint-staged.config.js
const micromatch = require('micromatch')

module.exports = (allStagedFiles) => {
  const shFiles = micromatch(allStagedFiles, ['**/src/**/*.sh'])
  if (shFiles.length) {
    return `printf '%s\n' "Script files aren't allowed in src directory" >&2`
  }
  const codeFiles = micromatch(allStagedFiles, ['**/*.js', '**/*.ts'])
  const docFiles = micromatch(allStagedFiles, ['**/*.md'])
  return [`eslint ${codeFiles.join(' ')}`, `mdl ${docFiles.join(' ')}`]
}

Example: Wrap filenames in single quotes and run once per file

Click to expand

// .lintstagedrc.js
module.exports = {
  '**/*.js?(x)': (filenames) => filenames.map((filename) => `prettier --write '${filename}'`),
}

Example: Run `tsc` on changes to TypeScript files, but do not pass any filename arguments

Click to expand

// lint-staged.config.js
module.exports = {
  '**/*.ts?(x)': () => 'tsc -p tsconfig.json --noEmit',
}

Example: Run ESLint on entire repo if more than 10 staged files

Click to expand

// .lintstagedrc.js
module.exports = {
  '**/*.js?(x)': (filenames) =>
    filenames.length > 10 ? 'eslint .' : `eslint ${filenames.join(' ')}`,
}

Example: Use your own globs

Click to expand

It's better to use the function-based configuration (seen above), if your use case is this.

// lint-staged.config.js
const micromatch = require('micromatch')

module.exports = {
  '*': (allFiles) => {
    const codeFiles = micromatch(allFiles, ['**/*.js', '**/*.ts'])
    const docFiles = micromatch(allFiles, ['**/*.md'])
    return [`eslint ${codeFiles.join(' ')}`, `mdl ${docFiles.join(' ')}`]
  },
}

Example: Ignore files from match

Click to expand

If for some reason you want to ignore files from the glob match, you can use micromatch.not():

// lint-staged.config.js
const micromatch = require('micromatch')

module.exports = {
  '*.js': (files) => {
    // from `files` filter those _NOT_ matching `*test.js`
    const match = micromatch.not(files, '*test.js')
    return `eslint ${match.join(' ')}`
  },
}

Please note that for most cases, globs can achieve the same effect. For the above example, a matching glob would be !(*test).js.

Example: Use relative paths for commands

Click to expand

const path = require('path')

module.exports = {
  '*.ts': (absolutePaths) => {
    const cwd = process.cwd()
    const relativePaths = absolutePaths.map((file) => path.relative(cwd, file))
    return `ng lint myProjectName --files ${relativePaths.join(' ')}`
  },
}

Reformatting the code

Tools like Prettier, ESLint/TSLint, or stylelint can reformat your code according to an appropriate config by running prettier --write/eslint --fix/tslint --fix/stylelint --fix. Lint-staged will automatically add any modifications to the commit as long as there are no errors.

{
  "*.js": "prettier --write"
}

Prior to version 10, tasks had to manually include git add as the final step. This behavior has been integrated into lint-staged itself in order to prevent race conditions with multiple tasks editing the same files. If lint-staged detects git add in task configurations, it will show a warning in the console. Please remove git add from your configuration after upgrading.

Examples

All examples assume you've already set up lint-staged in the package.json file and husky in its own config file.

{
  "name": "My project",
  "version": "0.1.0",
  "scripts": {
    "my-custom-script": "linter --arg1 --arg2"
  },
  "lint-staged": {}
}

In .husky/pre-commit

#!/usr/bin/env sh
. "$(dirname "$0")/_/husky.sh"

npx lint-staged

Note: we don't pass a path as an argument for the runners. This is important since lint-staged will do this for you.

ESLint with default parameters for `.js` and `.jsx` running as a pre-commit hook

Click to expand

{
  "*.{js,jsx}": "eslint"
}

Automatically fix code style with `--fix` and add to commit

Click to expand

{
  "*.js": "eslint --fix"
}

This will run eslint --fix and automatically add changes to the commit.

Reuse npm script

Click to expand

If you wish to reuse a npm script defined in your package.json:

{
  "*.js": "npm run my-custom-script --"
}

The following is equivalent:

{
  "*.js": "linter --arg1 --arg2"
}

Use environment variables with linting commands

Click to expand

Linting commands do not support the shell convention of expanding environment variables. To enable the convention yourself, use a tool like cross-env.

For example, here is jest running on all .js files with the NODE_ENV variable being set to "test":

{
  "*.js": ["cross-env NODE_ENV=test jest --bail --findRelatedTests"]
}

Automatically fix code style with `prettier` for any format Prettier supports

Click to expand

{
  "*": "prettier --ignore-unknown --write"
}

Automatically fix code style with `prettier` for JavaScript, TypeScript, Markdown, HTML, or CSS

Click to expand

{
  "*.{js,jsx,ts,tsx,md,html,css}": "prettier --write"
}

Stylelint for CSS with defaults and for SCSS with SCSS syntax

Click to expand

{
  "*.css": "stylelint",
  "*.scss": "stylelint --syntax=scss"
}

Run PostCSS sorting and Stylelint to check

Click to expand

{
  "*.scss": ["postcss --config path/to/your/config --replace", "stylelint"]
}

Minify the images

Click to expand

{
  "*.{png,jpeg,jpg,gif,svg}": "imagemin-lint-staged"
}

More about imagemin-lint-staged

imagemin-lint-staged is a CLI tool designed for lint-staged usage with sensible defaults.

See more on this blog post for benefits of this approach.

Typecheck your staged files with flow

Click to expand

{
  "*.{js,jsx}": "flow focus-check"
}

Frequently Asked Questions

Can I use `lint-staged` via node?

Click to expand

Yes!

const lintStaged = require('lint-staged')

try {
  const success = await lintStaged()
  console.log(success ? 'Linting was successful!' : 'Linting failed!')
} catch (e) {
  // Failed to load configuration
  console.error(e)
}

Parameters to lintStaged are equivalent to their CLI counterparts:

const success = await lintStaged({
  allowEmpty: false,
  concurrent: true,
  configPath: './path/to/configuration/file',
  cwd: process.cwd(),
  debug: false,
  maxArgLength: null,
  quiet: false,
  relative: false,
  shell: false
  stash: true,
  verbose: false
})

You can also pass config directly with config option:

const success = await lintStaged({
  allowEmpty: false,
  concurrent: true,
  config: { '*.js': 'eslint --fix' },
  cwd: process.cwd(),
  debug: false,
  maxArgLength: null,
  quiet: false,
  relative: false,
  shell: false,
  stash: true,
  verbose: false,
})

The maxArgLength option configures chunking of tasks into multiple parts that are run one after the other. This is to avoid issues on Windows platforms where the maximum length of the command line argument string is limited to 8192 characters. Lint-staged might generate a very long argument string when there are many staged files. This option is set automatically from the cli, but not via the Node.js API by default.

Using with JetBrains IDEs (WebStorm, PyCharm, IntelliJ IDEA, RubyMine, etc.)

Click to expand

Update: The latest version of JetBrains IDEs now support running hooks as you would expect.

When using the IDE's GUI to commit changes with the precommit hook, you might see inconsistencies in the IDE and command line. This is known issue at JetBrains so if you want this fixed, please vote for it on YouTrack.

Until the issue is resolved in the IDE, you can use the following config to work around it:

husky v1.x

{
  "husky": {
    "hooks": {
      "pre-commit": "lint-staged",
      "post-commit": "git update-index --again"
    }
  }
}

husky v0.x

{
  "scripts": {
    "precommit": "lint-staged",
    "postcommit": "git update-index --again"
  }
}

Thanks to this comment for the fix!

How to use `lint-staged` in a multi-package monorepo?

Click to expand

Starting with v5.0, lint-staged automatically resolves the git root without any additional configuration. You configure lint-staged as you normally would if your project root and git root were the same directory.

If you wish to use lint-staged in a multi package monorepo, it is recommended to install husky in the root package.json. lerna can be used to execute the precommit script in all sub-packages.

Example repo: sudo-suhas/lint-staged-multi-pkg.

Can I lint files outside of the current project folder?

Click to expand

tl;dr: Yes, but the pattern should start with ../.

By default, lint-staged executes linters only on the files present inside the project folder(where lint-staged is installed and run from). So this question is relevant only when the project folder is a child folder inside the git repo. In certain project setups, it might be desirable to bypass this restriction. See #425, #487 for more context.

lint-staged provides an escape hatch for the same(>= v7.3.0). For patterns that start with ../, all the staged files are allowed to match against the pattern. Note that patterns like *.js, **/*.js will still only match the project files and not any of the files in parent or sibling directories.

Example repo: sudo-suhas/lint-staged-django-react-demo.

How can I ignore files from `.eslintignore`?

Click to expand

ESLint throws out warning File ignored because of a matching ignore pattern. Use "--no-ignore" to override warnings that breaks the linting process ( if you used --max-warnings=0 which is recommended ).

ESLint < 7

Click to expand

Based on the discussion from this issue, it was decided that using the outlined script is the best route to fix this.

So you can setup a .lintstagedrc.js config file to do this:

const { CLIEngine } = require('eslint')

const cli = new CLIEngine({})

module.exports = {
  '*.js': (files) =>
    'eslint --max-warnings=0 ' + files.filter((file) => !cli.isPathIgnored(file)).join(' '),
}

ESLint >= 7

Click to expand

In versions of ESLint > 7, isPathIgnored is an async function and now returns a promise. The code below can be used to reinstate the above functionality.

Since 10.5.3, any errors due to a bad ESLint config will come through to the console.

const { ESLint } = require('eslint')

const removeIgnoredFiles = async (files) => {
  const eslint = new ESLint()
  const isIgnored = await Promise.all(
    files.map((file) => {
      return eslint.isPathIgnored(file)
    })
  )
  const filteredFiles = files.filter((_, i) => !isIgnored[i])
  return filteredFiles.join(' ')
}

module.exports = {
  '**/*.{ts,tsx,js,jsx}': async (files) => {
    const filesToLint = await removeIgnoredFiles(files)
    return [`eslint --max-warnings=0 ${filesToLint}`]
  },
}

Name		Name	Last commit message	Last commit date
Latest commit History 801 Commits
.github		.github
.husky		.husky
bin		bin
lib		lib
screenshots		screenshots
test		test
.editorconfig		.editorconfig
.eslintignore		.eslintignore
.eslintrc.json		.eslintrc.json
.gitattributes		.gitattributes
.gitignore		.gitignore
.lintstagedrc.json		.lintstagedrc.json
.pre-commit-hooks.yaml		.pre-commit-hooks.yaml
.prettierrc.json		.prettierrc.json
LICENSE		LICENSE
README.md		README.md
babel.config.cjs		babel.config.cjs
jest.config.js		jest.config.js
package-lock.json		package-lock.json
package.json		package.json
testSetup.js		testSetup.js
wallaby.js		wallaby.js

License

ls-valentinas-bakaitis/lint-staged

Folders and files

Latest commit

History

Repository files navigation

🚫💩 lint-staged

Why

Related blog posts and talks

Installation and setup

Changelog

Migration

v12

v10

Command line flags

Configuration

package.json example:

.lintstagedrc example

Filtering files

Ignoring files

What commands are supported?

Running multiple commands in a sequence

Using JS configuration file

Function signature

Example: Export a function to build your own matchers

Example: Wrap filenames in single quotes and run once per file

Example: Run tsc on changes to TypeScript files, but do not pass any filename arguments

Example: Run ESLint on entire repo if more than 10 staged files

Example: Use your own globs

Example: Ignore files from match

Example: Use relative paths for commands

Reformatting the code

Examples

ESLint with default parameters for *.js and *.jsx running as a pre-commit hook

Automatically fix code style with --fix and add to commit

Reuse npm script

Use environment variables with linting commands

Automatically fix code style with prettier for any format Prettier supports

Automatically fix code style with prettier for JavaScript, TypeScript, Markdown, HTML, or CSS

Stylelint for CSS with defaults and for SCSS with SCSS syntax

Run PostCSS sorting and Stylelint to check

Minify the images

Typecheck your staged files with flow

Frequently Asked Questions

Can I use lint-staged via node?

Using with JetBrains IDEs (WebStorm, PyCharm, IntelliJ IDEA, RubyMine, etc.)

How to use lint-staged in a multi-package monorepo?

Can I lint files outside of the current project folder?

How can I ignore files from .eslintignore?

ESLint < 7

ESLint >= 7

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

`package.json` example:

`.lintstagedrc` example

Example: Run `tsc` on changes to TypeScript files, but do not pass any filename arguments

ESLint with default parameters for `.js` and `.jsx` running as a pre-commit hook

Automatically fix code style with `--fix` and add to commit

Automatically fix code style with `prettier` for any format Prettier supports

Automatically fix code style with `prettier` for JavaScript, TypeScript, Markdown, HTML, or CSS

Can I use `lint-staged` via node?

How to use `lint-staged` in a multi-package monorepo?

How can I ignore files from `.eslintignore`?

Packages