Skip to content

Action Status

Coverage Status

Quickstart with a C++ project template

Take a look at this C++ project template that applies all the following instructions, but also shows how to create a pure workflow without using special GitHub action that you cannot run locally on your development machine, but directly using the tools (CMake, Ninja, vcpkg, C++ compilers) you already use daily.

The run-cmake action runs CMake on GitHub workflows leveraging CMakePresets.json. Note that usage of CMakePresets.json is required.

Good companions are the run-vcpkg action and the get-cmake action.

Special features which provide added value over a pure workflow are:

  • annotations for CMake errors/warnings and for build (gcc/msvc/clang) errors/warnings are created inline in the changed source files the build run for, e.g.: Annotation
  • when necessary, it sets up the environment to build with the MSVC toolset.
  • automatic dump of log files created by CMake (e.g., CMakeOutput.log) and vcpkg. The content of those files flow into the workflow output log. The regex is customizable by the user.

The provided samples use GitHub hosted runners.

Good companions are the run-vcpkg action and the get-cmake action.


Quickstart with instructions

It is highly recommended to use:

jobs:
  build:
    steps:
      #-uses: actions/cache@v3   <===== YOU DO NOT NEED THIS!

      # Install latest CMake and Ninja.
      - uses: lukka/get-cmake@latest
      # Or pin to a specific CMake version:
      # lukka/[email protected]

      # Setup vcpkg: ensures vcpkg is downloaded and built.
      # Since vcpkg.json is being used later on to install the packages
      # when `run-cmake` runs, no packages are installed at this time
      # (and vcpkg does not run).
      - name: Setup anew (or from cache) vcpkg (and does not build any package)
        uses: lukka/run-vcpkg@v11 # Always specify the specific _version_ of the
                                  # action you need, `v11` in this case to stay up
                                  # to date with fixes on the v11 branch.
        #with:
          # This is the default location of the directory containing vcpkg sources.
          # Change it to the right location if needed.
          # vcpkgDirectory: '${{ github.workspace }}/vcpkg'

          # If not using a submodule for vcpkg sources, this specifies which commit
          # id must be checkout from a Git repo.
          # Note: it must not be set if using a Git submodule for vcpkg.
          # vcpkgGitCommitId: '${{ matrix.vcpkgCommitId }}'

          # This is only needed if the command `vcpkg install` must run at this step.
          # Instead it is highly suggested to let `run-cmake` to run vcpkg later on
          # using the vcpkg.cmake toolchain. The default is `false`.
          # runVcpkgInstall: true

          # This is only needed if `runVpkgInstall` is `true`.
          # This glob expression used to locate the vcpkg.json and  use
          # its directory location as `working directory` when running `vcpkg install`.
          # Change it to match a single manifest file you want to use.
          # Note: do not use `${{ github.context }}` to compose the value as it
          # contains backslashes that would be misinterpreted. Instead
          # compose a value relative to the root of the repository using
          # `**/path/from/root/of/repo/to/vcpkg.json` to match the desired `vcpkg.json`.
          # vcpkgJsonGlob: '**/vcpkg.json'

      - name: Run CMake consuming CMakePreset.json and run vcpkg to build packages
        uses: lukka/run-cmake@v10
        with:
          # This is the default path to the CMakeLists.txt along side the
          # CMakePresets.json. Change if you need have CMakeLists.txt and CMakePresets.json
          # located elsewhere.
          # cmakeListsTxtPath: '${{ github.workspace }}/CMakeLists.txt'

          # You could use CMake workflow presets defined in the CMakePresets.json
          # with just this line below. Note this one cannot be used with any other
          # preset input, it is mutually exclusive.
          # workflowPreset: 'workflow-name'

          # This is the name of the CMakePresets.json's configuration to use to generate
          # the project files. This configuration leverages the vcpkg.cmake toolchain file to
          # run vcpkg and install all dependencies specified in vcpkg.json.
          configurePreset: 'ninja-multi-vcpkg'
          # Additional arguments can be appended to the cmake command.
          # This is useful to reduce the number of CMake's Presets since you can reuse
          # an existing preset with different variables.
          configurePresetAdditionalArgs: "['-DENABLE_YOUR_FEATURE=1']"

          # This is the name of the CMakePresets.json's configuration to build the project.
          buildPreset: 'ninja-multi-vcpkg'
          # Additional arguments can be appended when building, for example to specify the
          # configuration to build.
          # This is useful to reduce the number of CMake's Presets you need in CMakePresets.json.
          buildPresetAdditionalArgs: "['--config Release']"

          # This is the name of the CMakePresets.json's configuration to test the project with.
          testPreset: 'ninja-multi-vcpkg'
          # Additional arguments can be appended when testing, for example to specify the config
          # to test.
          # This is useful to reduce the number of CMake's Presets you need in CMakePresets.json.
          testPresetAdditionalArgs: "['--config Release']"

     #  [OPTIONAL] Define the vcpkg's triplet you want to enforce, otherwise the default one
    #  for the hosting system will be automatically choosen (x64 is the default on all
    #  platforms, e.g. `x64-osx`).
    #  VCPKG_DEFAULT_TRIPLET: ${{ matrix.triplet }}
    #
    #  [OPTIONAL] By default the action disables vcpkg's telemetry by defining VCPKG_DISABLE_METRICS.
    #  This behavior can be disabled by defining `VCPKG_ENABLE_METRICS` as follows.
    #  VCPKG_ENABLE_METRICS: 1
    #

Action reference: all input/output parameters

Description of all input parameters: action.yml


Flowchart

Flowchart with related input in action.yml which let customize the flow.

┌───────────────────────────┐      ┌───────────────────────────┐
│ <if workflowPreset        │  Yes │ Run the workflow       `*`│  Inputs:
│ provided>                 ├─────►│ and then exit             │   - `cmakeListsTxtPath`
└─────────────┬─────────────┘      └─────────────┬─────────────┘   - `workflowPreset`
              │ No                               ⬬                 - `workflowPresetCmdString`
              ▼
┌──────────────────────────────────┐
│ <if configurePreset           `*`│     Inputs:
│ provided>                        |      - `cmakeListsTxtPath`
|                                  |      - `configurePreset`
│ $CONFIGURE_PRESET_NAME =         │      - `configurePresetCmdString`
│ configurePreset's value          │
| runs: `cmake --preset`           │
└─────────────┬────────────────────┘
              ▼
┌───────────────────────────────────┐
│ <if buildPreset provided>      `*`│     Inputs:
│                                   │     - `buildPreset`
│ $BUILD_PRESET_NAME=buildPreset    │     - `cmakeListsTxtPath`
│ runs: `cmake --build --preset`    │     - `buildPresetCmdString`
└─────────────┬─────────────────────┘     - `buildPresetAdditionalArgs`
              ▼
┌───────────────────────────────────┐
│ <if testPreset provided>       `*`│    Inputs:
│                                   │     - `testPreset`
│ $TEST_PRESET_NAME=testPreset      │     - `cmakeListsTxtPath`
│ runs: `ctest --preset`            │     - `testPresetCmdString`
└─────────────┬─────────────────────┘     - `testPresetAdditionalArgs`
              ▼
┌───────────────────────────────────┐
│ <if packagePreset provided>    `*`│    Inputs:
│                                   │     - `packagePreset`
│ $PACKAGE_PRESET_NAME=packagePreset│     - `cmakeListsTxtPath`
│ runs: `cpack --preset`            │     - `packagePresetCmdString`
└─────────────┬─────────────────────┘     - `packagePresetAdditionalArgs`
              ▼
              ⬬ END


  `*` On Windows runners, the MSVC environment is setup for each block
   with the `*` on the top right corner. Note that VCPKG_ROOT will not be
   overridden by the value defined in the VS Developer Command Prompt
   environment, but the original value will be kept.
 ┌───────────────────────────┐
 │ <if VCPKG_ROOT defined    │  Inputs:
 │ and CC and CXX undefined> │   - `runVcpkgEnvFormatString`
 │ run `vcpkg env` to set    │   - `configurePresetAdditionalArgs`
 │ the environment for MSVC  │
 └───────────────────────────┘

Samples

Checkmarks indicates whether the samples "uses" or specifies the thing in the header or whether it is true.

workflow link vcpkg as submodule explicit triplet vcpkg toolchain CMake's Presets Ninja run-vcpkg runs vcpkg CMake runs vcpkg
link
link
link
link

Who is using run-cmake

This graph shows the list of public repositories with more than 25 stars using run-cmake.


License

All the content in this repository is licensed under the MIT License.

Copyright © 2019-2020-2021-2022-2023 Luca Cappa


Disclaimer

The software is provided as is, there is no warranty of any kind. All users are encouraged to improve the source code with fixes and new features.


Contributing

Read CONTRIBUTING.md