chproxy

Chproxy, is an http proxy and load balancer for ClickHouse database. It provides the following features:

May proxy requests to multiple distinct ClickHouse clusters depending on the input user. For instance, requests from appserver user may go to stats-raw cluster, while requests from reportserver user may go to stats-aggregate cluster.
May map input users to per-cluster users. This prevents from exposing real usernames and passwords used in ClickHouse clusters. Additionally this allows mapping multiple distinct input users to a single ClickHouse user.
May accept incoming requests via HTTP and HTTPS.
May limit HTTP and HTTPS access by IP/IP-mask lists.
May limit per-user access by IP/IP-mask lists.
May limit per-user query duration. Timed out or canceled queries are forcibly killed via KILL QUERY.
May limit per-user requests rate.
May limit per-user number of concurrent requests.
All the limits may be independently set for each input user and for each per-cluster user.
May delay request execution until it fits per-user limits.
Per-user response caching may be configured.
Response caches have built-in protection against thundering herd problem aka dogpile effect.
Evenly spreads requests among replicas and nodes using least loaded + round robin technique.
Monitors node health and prevents from sending requests to unhealthy nodes.
Supports automatic HTTPS certificate issuing and renewal via Let’s Encrypt.
May proxy requests to each configured cluster via either HTTP or HTTPS.
Prepends User-Agent request header with remote/local address and in/out usernames before proxying it to ClickHouse, so this info may be queried from system.query_log.http_user_agent.
Exposes various useful metrics in prometheus text format.
Configuration may be updated without restart - just send SIGHUP signal to chproxy process.
Easy to manage and run - just pass config file path to a single chproxy binary.
Easy to configure:

server:
  http:
    listen_addr: ":9090"
    allowed_networks: ["127.0.0.0/24"]

users:
  - name: "default"
    to_cluster: "default"
    to_user: "default"

# by default each cluster has `default` user which can be overridden by section `users`
clusters:
  - name: "default"
    nodes: ["127.0.0.1:8123"]

How to install

Precompiled binaries

Precompiled chproxy binaries are available here. Just download the latest stable binary, unpack and run it with the desired config:

./chproxy -config=/path/to/config.yml

Building from source

Chproxy is written in Go. The easiest way to install it from sources is:

go get -u github.com/Vertamedia/chproxy

If you don't have Go installed on your system - follow this guide.

Why it was created

ClickHouse may exceed max_execution_time and max_concurrent_queries limits due to various reasons:

max_execution_time may be exceeded due to the current implementation deficiencies.
max_concurrent_queries works only on a per-node basis. There is no way to limit the number of concurrent queries on a cluster if queries are spread across cluster nodes.

Such "leaky" limits may lead to high resource usage on all the cluster nodes. After facing this problem we had to maintain two distinct http proxies in front of our ClickHouse cluster - one for spreading INSERTs among cluster nodes and another one for sending SELECTs to a dedicated node where limits may be enforced somehow. This was fragile and inconvenient to manage, so chproxy has been created :)

Use cases

Spread `INSERT`s among cluster shards

Usually INSERTs are sent from app servers located in a limited number of subnetworks. INSERTs from other subnetworks must be denied.

All the INSERTs may be routed to a distributed table on a single node. But this increases resource usage (CPU and network) on the node comparing to other nodes, since it must parse each row to be inserted and route it to the corresponding node (shard).

It would be better to spread INSERTs among available shards and to route them directly to per-shard tables instead of distributed tables. The routing logic may be embedded either directly into applications generating INSERTs or may be moved to a proxy. Proxy approach is better since it allows re-configuring ClickHouse cluster without modification of application configs and without application downtime. Multiple identical proxies may be started on distinct servers for scalability and availability purposes.

The following minimal chproxy config may be used for this use case:

server:
  http:
      listen_addr: ":9090"

      # Networks with application servers.
      allowed_networks: ["10.10.1.0/24"]

users:
  - name: "insert"
    to_cluster: "stats-raw"
    to_user: "default"

clusters:
  - name: "stats-raw"

    # Requests are spread in `round-robin` + `least-loaded` fashion among nodes.
    # Unreachable and unhealthy nodes are skipped.
    nodes: [
      "10.10.10.1:8123",
      "10.10.10.2:8123",
      "10.10.10.3:8123",
      "10.10.10.4:8123"
    ]

Spread `SELECT`s from reporting apps among cluster nodes

Reporting apps usually generate various customer reports from SELECT query results. The load generated by such SELECTs on ClickHouse cluster may vary depending on the number of online customers and on the generated report types. It is obvious that the load must be limited in order to prevent cluster overload.

All the SELECTs may be routed to a distributed table on a single node. But this increases resource usage (RAM, CPU and network) on the node comparing to other nodes, since it must do final aggregation, sorting and filtering for the data obtained from cluster nodes (shards).

It would be better to create identical distributed tables on each shard and spread SELECTs among all the available shards.

The following minimal chproxy config may be used for this use case:

server:
  http:
      listen_addr: ":9090"

      # Networks with reporting servers.
      allowed_networks: ["10.10.2.0/24"]

users:
  - name: "report"
    to_cluster: "stats-aggregate"
    to_user: "readonly"
    max_concurrent_queries: 6
    max_execution_time: 1m

clusters:
  - name: "stats-aggregate"
    nodes: [
      "10.10.20.1:8123",
      "10.10.20.2:8123"
    ]
    users:
      - name: "readonly"
        password: "****"

Authorize users by passwords via HTTPS

Suppose you need to access ClickHouse cluster from anywhere by username/password. This may be used for building graphs from ClickHouse-grafana or tabix. It is bad idea to transfer unencrypted password and data over untrusted networks. So HTTPS must be used for accessing the cluster in such cases. The following chproxy config may be used for this use case:

server:
  https:
    listen_addr: ":443"
    autocert:
      cache_dir: "certs_dir"

users:
  - name: "web"
    password: "****"
    to_cluster: "stats-raw"
    to_user: "web"
    max_concurrent_queries: 2
    max_execution_time: 30s
    requests_per_minute: 10
    deny_http: true

    # Allow `CORS` requests for `tabix`.
    allow_cors: true

    # Enable requests queueing - `chproxy` will queue up to `max_queue_size`
    # of incoming requests for up to `max_queue_time` until they stop exceeding
    # the current limits.
    # This allows gracefully handling request bursts when more than
    # `max_concurrent_queries` concurrent requests arrive.
    max_queue_size: 40
    max_queue_time: 25s

    # Enable response caching. See cache config below.
    cache: "shortterm"

clusters:
  - name: "stats-raw"
    nodes: [
     "10.10.10.1:8123",
     "10.10.10.2:8123",
     "10.10.10.3:8123",
     "10.10.10.4:8123"
    ]
    users:
      - name: "web"
        password: "****"

caches:
  - name: "shortterm"
    dir: "/path/to/cache/dir"
    max_size: 150Mb

    # Cached responses will expire in 130s.
    expire: 130s

All the above configs combined

All the above cases may be combined in a single chproxy config:

server:
  http:
      listen_addr: ":9090"
      allowed_networks: ["10.10.1.0/24","10.10.2.0/24"]
  https:
    listen_addr: ":443"
    autocert:
      cache_dir: "certs_dir"

users:
  - name: "insert"
    allowed_networks: ["10.10.1.0/24"]
    to_cluster: "stats-raw"
    to_user: "default"

  - name: "report"
    allowed_networks: ["10.10.2.0/24"]
    to_cluster: "stats-aggregate"
    to_user: "readonly"
    max_concurrent_queries: 6
    max_execution_time: 1m

  - name: "web"
    password: "****"
    to_cluster: "stats-raw"
    to_user: "web"
    max_concurrent_queries: 2
    max_execution_time: 30s
    requests_per_minute: 10
    deny_http: true
    allow_cors: true
    max_queue_size: 40
    max_queue_time: 25s
    cache: "shortterm"

clusters:
  - name: "stats-aggregate"
    nodes: [
      "10.10.20.1:8123",
      "10.10.20.2:8123"
    ]
    users:
    - name: "readonly"
      password: "****"

  - name: "stats-raw"
    nodes: [
     "10.10.10.1:8123",
     "10.10.10.2:8123",
     "10.10.10.3:8123",
     "10.10.10.4:8123"
    ]
    users:
      - name: "default"

      - name: "web"
        password: "****"

caches:
  - name: "shortterm"
    dir: "/path/to/cache/dir"
    max_size: 150Mb
    expire: 130s

Configuration

Server

Chproxy may accept requests over HTTP and HTTPS protocols. HTTPS must be configured with custom certificate or with automated Let's Encrypt certificates.

Access to chproxy can be limitied by list of IPs or IP masks. This option can be applied to HTTP, HTTPS, metrics, user or cluster-user.

Users

There are two types of users: in-users (in global section) and out-users (in cluster section). This means all requests will be matched to in-users and if all checks are Ok - will be matched to out-users with overriding credentials.

Suppose we have one ClickHouse user web with read-only permissions and max_concurrent_queries: 4 limit. There are two distinct applications reading from ClickHouse. We may create two distinct in-users with to_user: "web" and max_concurrent_queries: 2 each in order to avoid situation when a single application exhausts all the 4-request limit on the web user.

Requests to chproxy must be authorized with credentials from user_config. Credentials can be passed via BasicAuth or via user and password query string args.

Limits for in-users and out-users are independent.

Clusters

Chproxy can be configured with multiple clusters. Each cluster must have a name and either a list of nodes or a list of replicas with nodes. See cluster-config for details. Requests to each cluster are balanced among replicas and nodes using round-robin + least-loaded approach. The node priority is automatically decreased for a short interval if recent requests to it were unsuccessful. This means that the chproxy will choose the next least loaded healthy node among least loaded replica for every new request.

Additionally each node is periodically checked for availability. Unavailable nodes are automatically excluded from the cluster until they become available again. This allows performing node maintenance without removing unavailable nodes from the cluster config.

Chproxy automatically kills queries exceeding max_execution_time limit. By default chproxy tries to kill such queries under default user. The user may be overriden with kill_query_user.

If cluster's users section isn't specified, then default user is used with no limits.

Caching

Chproxy may be configured to cache responses. It is possible to create multiple cache-configs with various settings. Response caching is enabled by assigning cache name to user. Multiple users may share the same cache. Currently only SELECT responses are cached. Caching is disabled for request with no_cache=1 in query string. Optional cache namespace may be passed in query string as cache_namespace=aaaa. This allows caching distinct responses for the identical query under distinct cache namespaces. Additionally, an instant cache flush may be built on top of cache namespaces - just switch to new namespace in order to flush the cache.

Security

Chproxy removes all the query params from input requests (except the user's params and the query, database, default_format, compress, decompress, enable_http_compression) before proxying them to ClickHouse nodes. This prevents from unsafe overriding of various ClickHouse settings.

Be careful when configuring limits, allowed networks, passwords etc. By default chproxy tries detecting the most obvious configuration errors such as allowed_networks: ["0.0.0.0/0"] or sending passwords via unencrypted HTTP.

Special option hack_me_please: true may be used for disabling all the security-related checks during config validation (if you are feelying lucky :) ).

Example of full configuration:

# Whether to print debug logs.
#
# By default debug logs are disabled.
log_debug: true

# Whether to ignore security checks during config parsing.
#
# By default security checks are enabled.
hack_me_please: true

# Optional response cache configs.
#
# Multiple distinct caches with different settings may be configured.
caches:
    # Cache name, which may be passed into `cache` option on the `user` level.
    #
    # Multiple users may share the same cache.
  - name: "longterm"

    # Path to directory where cached responses will be stored.
    dir: "/path/to/longterm/cachedir"

    # Maximum cache size.
    # `Kb`, `Mb`, `Gb` and `Tb` suffixes may be used.
    max_size: 100Gb

    # Expiration time for cached responses.
    expire: 1h

    # When multiple requests with identical query simultaneously hit `chproxy`
    # and there is no cached response for the query, then only a single
    # request will be proxied to clickhouse. Other requests will wait
    # for the cached response during this grace duration.
    # This is known as protection from `thundering herd` problem.
    #
    # By default `grace_time` is 5s. Negative value disables the protection
    # from `thundering herd` problem.
    grace_time: 20s

  - name: "shortterm"
    dir: "/path/to/shortterm/cachedir"
    max_size: 100Mb
    expire: 10s

# Optional network lists, might be used as values for `allowed_networks`.
network_groups:
  - name: "office"
    # Each item may contain either IP or IP subnet mask.
    networks: ["127.0.0.0/24", "10.10.0.1"]

  - name: "reporting-apps"
    networks: ["10.10.10.0/24"]

# Optional lists of query params to send with each proxied request to ClickHouse.
# These lists may be used for overriding ClickHouse settings on a per-user basis.
param_groups:
    # Group name, which may be passed into `params` option on the `user` level.
  - name: "cron-job"
    # List of key-value params to send
    params:
      - key: "max_memory_usage"
        value: "40000000000"

      - key: "max_bytes_before_external_group_by"
        value: "20000000000"

  - name: "web"
    params:
      - key: "max_memory_usage"
        value: "5000000000"

      - key: "max_columns_to_read"
        value: "30"

      - key: "max_execution_time"
        value: "30"

# Settings for `chproxy` input interfaces.
server:
  # Configs for input http interface.
  # The interface works only if this section is present.
  http:
    # TCP address to listen to for http.
    # May be in the form IP:port . IP part is optional.
    listen_addr: ":9090"

    # List of allowed networks or network_groups.
    # Each item may contain IP address, IP subnet mask or a name
    # from `network_groups`.
    # By default requests are accepted from all the IPs.
    allowed_networks: ["office", "reporting-apps", "1.2.3.4"]

  # Configs for input https interface.
  # The interface works only if this section is present.
  https:
    # TCP address to listen to for https.
    listen_addr: ":443"

    # Paths to TLS cert and key files.
    # cert_file: "cert_file"
    # key_file: "key_file"

    # Letsencrypt config.
    # Certificates are automatically issued and renewed if this section
    # is present.
    # There is no need in cert_file and key_file if this section is present.
    # Autocert requires application to listen on :80 port for certificate generation
    autocert:
      # Path to the directory where autocert certs are cached.
      cache_dir: "certs_dir"

      # The list of host names proxy is allowed to respond to.
      # See https://godoc.org/golang.org/x/crypto/acme/autocert#HostPolicy
      allowed_hosts: ["example.com"]

  # Metrics in prometheus format are exposed on the `/metrics` path.
  # Access to `/metrics` endpoint may be restricted in this section.
  # By default access to `/metrics` is unrestricted.
  metrics:
    allowed_networks: ["office"]

# Configs for input users.
users:
    # Name and password are used to authorize access via BasicAuth or
    # via `user`/`password` query params.
    # Password is optional. By default empty password is used.
  - name: "web"
    password: "****"

    # Requests from the user are routed to this cluster.
    to_cluster: "first cluster"

    # Input user is substituted by the given output user from `to_cluster`
    # before proxying the request.
    to_user: "web"

    # Whether to deny input requests over HTTP.
    deny_http: true

    # Whether to allow `CORS` requests like `tabix` does.
    # By default `CORS` requests are denied for security reasons.
    allow_cors: true

    # Requests per minute limit for the given input user.
    #
    # By default there is no per-minute limit.
    requests_per_minute: 4

    # Response cache config name to use.
    #
    # By default responses aren't cached.
    cache: "longterm"

    # An optional group of params to send to ClickHouse with each proxied request.
    # These params may be set in param_groups block.
    #
    # By default no additional params are sent to ClickHouse.
    params: "web"

    # The maximum number of requests that may wait for their chance
    # to be executed because they cannot run now due to the current limits.
    #
    # This option may be useful for handling request bursts from `tabix`
    # or `clickhouse-grafana`.
    #
    # By default all the requests are immediately executed without
    # waiting in the queue.
    max_queue_size: 100

    # The maximum duration the queued requests may wait for their chance
    # to be executed.
    # This option makes sense only if max_queue_size is set.
    # By default requests wait for up to 10 seconds in the queue.
    max_queue_time: 35s

  - name: "default"
    to_cluster: "second cluster"
    to_user: "default"
    allowed_networks: ["office", "1.2.3.0/24"]

    # The maximum number of concurrently running queries for the user.
    #
    # By default there is no limit on the number of concurrently
    # running queries.
    max_concurrent_queries: 4

    # The maximum query duration for the user.
    # Timed out queries are forcibly killed via `KILL QUERY`.
    #
    # By default there is no limit on the query duration.
    max_execution_time: 1m

    # Whether to deny input requests over HTTPS.
    deny_https: true

# Configs for ClickHouse clusters.
clusters:
    # The cluster name is used in `to_cluster`.
  - name: "first cluster"

    # Protocol to use for communicating with cluster nodes.
    # Currently supported values are `http` or `https`.
    # By default `http` is used.
    scheme: "http"

    # Cluster node addresses.
    # Requests are evenly distributed among them.
    nodes: ["127.0.0.1:8123", "shard2:8123"]

    # Each cluster node is checked for availability using this interval.
    # By default each node is checked for every 5 seconds.
    heartbeat_interval: 1m

    # Timed out queries are killed using this user.
    # By default `default` user is used.
    kill_query_user:
      name: "default"
      password: "***"

    # Configuration for cluster users.
    users:
        # The user name is used in `to_user`.
      - name: "web"
        password: "password"
        max_concurrent_queries: 4
        max_execution_time: 1m

  - name: "second cluster"
    scheme: "https"

    # The cluster may contain multiple replicas instead of flat nodes.
    #
    # Chproxy selects the least loaded node among the least loaded replicas.
    replicas:
      - name: "replica1"
        nodes: ["127.0.1.1:8443", "127.0.1.2:8443"]
      - name: "replica2"
        nodes: ["127.0.2.1:8443", "127.0.2.2:8443"]

    users:
      - name: "default"
        max_concurrent_queries: 4
        max_execution_time: 1m

      - name: "web"
        max_concurrent_queries: 4
        max_execution_time: 10s
        requests_per_minute: 10
        max_queue_size: 50
        max_queue_time: 70s
        allowed_networks: ["office"]

Full specification is located here

Metrics

Metrics are exposed in prometheus text format at /metrics path.

Name	Type	Description	Labels
status_codes_total	Counter	Distribution by response status codes	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`, `code`
request_sum_total	Counter	The number of processed requests	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
request_success_total	Counter	The number of successfully proxied requests	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
concurrent_limit_excess_total	Counter	The number of rejected requests due to max_concurrent_queries limit	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
host_penalties_total	Counter	The number of given penalties by host	`cluster`, `replica`, `cluster_node`
host_health	Gauge	Health state of hosts by clusters	`cluster`, `replica`, `cluster_node`
concurrent_queries	Gauge	The number of concurrent queries at the moment	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
request_queue_size	Gauge	Request queue size at the moment	`user`, `cluster`, `cluster_user`
user_queue_overflow_total	Counter	The number of overflows for per-user request queues	`user`, `cluster`, `cluster_user`
cluster_user_queue_overflow_total	Counter	The number of overflows for per-cluster_user request queues	`user`, `cluster`, `cluster_user`
request_body_bytes_total	Counter	The amount of bytes read from request bodies	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
response_body_bytes_total	Counter	The amount of bytes written to response bodies	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
cache_hits_total	Counter	The amount of cache hits	`cache`, `user`, `cluster`, `cluster_user`
cache_miss_total	Counter	The amount of cache misses	`cache`, `user`, `cluster`, `cluster_user`
cache_size	Gauge	Size of each cache	`cache`
cache_items	Gauge	The number of items in each cache	`cache`
request_duration_seconds	Summary	Request duration. Includes possible queue wait time	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
proxied_response_duration_seconds	Summary	Duration for responses proxied from clickhouse	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
cached_response_duration_seconds	Summary	Duration for cached responses. Includes the duration for sending response to client	`cache`, `user`, `cluster`, `cluster_user`
canceled_request_total	Counter	The number of requests canceled by remote client	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
killed_request_total	Counter	The number of requests killed by proxy	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
timeout_request_total	Counter	The number of timed out requests	`user`, `cluster`, `cluster_user`, `replica`, `cluster_node`
config_last_reload_successful	Gauge	Whether the last configuration reload attempt was successful
config_last_reload_success_timestamp_seconds	Gauge	Timestamp of the last successful configuration reload
bad_requests_total	Counter	The number of unsupported requests

An example of Grafana's dashboard for chproxy metrics is available here

FAQ

Is chproxy production ready?

Yes, we successfully use it in production for both INSERT and SELECT requests.
What about chproxy performance?

A single chproxy instance easily proxies 1Gbps of compressed INSERT data while using less than 20% of a single CPU core in our production setup.
Does chproxy support native interface for ClickHouse?

No. Because currently all our services work with ClickHouse only via HTTP. Support for native interface may be added in the future.

Name		Name	Last commit message	Last commit date
Latest commit History 466 Commits
cache		cache
chdecompressor		chdecompressor
config		config
log		log
testdata		testdata
vendor		vendor
.gitignore		.gitignore
.travis.yml		.travis.yml
Gopkg.lock		Gopkg.lock
Gopkg.toml		Gopkg.toml
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
chproxy_overview.json		chproxy_overview.json
io.go		io.go
io_test.go		io_test.go
main.go		main.go
main_test.go		main_test.go
metrics.go		metrics.go
proxy.go		proxy.go
proxy_test.go		proxy_test.go
scope.go		scope.go
scope_test.go		scope_test.go
utils.go		utils.go
utils_test.go		utils_test.go

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

chproxy

How to install

Precompiled binaries

Building from source

Why it was created

Use cases

Spread `INSERT`s among cluster shards

Spread `SELECT`s from reporting apps among cluster nodes

Authorize users by passwords via HTTPS

All the above configs combined

Configuration

Server

Users

Clusters

Caching

Security

Example of full configuration:

Full specification is located here

Metrics

FAQ

About

Releases

Packages

Languages

License

maximsnezhkov/chproxy

Folders and files

Latest commit

History

Repository files navigation

chproxy

How to install

Precompiled binaries

Building from source

Why it was created

Use cases

Spread INSERTs among cluster shards

Spread SELECTs from reporting apps among cluster nodes

Authorize users by passwords via HTTPS

All the above configs combined

Configuration

Server

Users

Clusters

Caching

Security

Example of full configuration:

Full specification is located here

Metrics

FAQ

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Spread `INSERT`s among cluster shards

Spread `SELECT`s from reporting apps among cluster nodes

Packages